Bearings

Ball Bearings feature pair of double-lipped labyrinth seals.

Providing protection from contamination and improve grease retention in spite of low friction, single-row deep groove Ball Bearings achieve low running noise through use of lubricant that withstands -50 to +150°C. They are available in size ranges of 6,000-6,012, 6,200-6,212, and 6,300-6,310, with 10-60 or 50 mm bore dia, in open, 2RS2 (sealed with 2 synthetic rubber seals), and 2Z versions...

Read More »
Non-Marking Timing Belt minimizes dust generation.
Belts

Non-Marking Timing Belt minimizes dust generation.

Constructed of high flex plastic over hardened fiberglass cord, TruMotion® Timing Belt is available in 2 mm GT, 3 mm GT, 3mm HTD, 5 mm HTD, .080 in., 1/5 in., and 3/8 in. pitches. Tooth surfaces have outer layer of nylon for wear resistance and quiet operation. Operating from -40 to 220°F, belt is corrosion- and abrasion-resistant, making it suitable for office automation, medical...

Read More »
Bearings

Air Bearing Actuator provides 2 g to 58 kg of force.

Combining air cylinder like linear actuation with zero friction air bearing technology, Airpel-AB provides force without friction, which is made possible by stainless steel piston that is precisely fitted to borosilicate glass cylinder. With as little as 5 psi of air applied to cylinder, same air that drives piston also produces stiff cushion of air to support piston. Operating from -20 to...

Read More »
SCHUNK's Pneumatic Rotary Module SRU Is Now Available in Smaller Sizes - 8-14
Actuators

SCHUNK's Pneumatic Rotary Module SRU Is Now Available in Smaller Sizes - 8-14

The new small SRU sizes offer high performance and feature strong, double actuating piston drive. Elastomer dampers or hydraulic shock absorbers may be used for deceleration. In addition, optional extras are available. As with the big SRU brothers, you also have numerous versions to choose from - totalling 8 different sizes. A media feed-through and a center position are also available as extra...

Read More »
Motors

AC Induction Motors are available with heat control.

WEG NHE or NPE motors rated from 1-300 hp can feature OptimalFlux(TM) technology for use in driving loads that require constant torque over variable speeds, such as those encountered with compressors and conveyor belts. This enables standard TEFC motor, powered by WEG variable frequency drive, to operate at temperatures reduce by 10°C across its entire speed range.

Read More »
Deep Groove Ball Bearings promote quiet operation.
Bearings

Deep Groove Ball Bearings promote quiet operation.

Manufactured from steel with very low oxygen content, Explorer Deep Groove Ball Bearings offer running accuracy to ISO tolerance class P5 and ABMA ABEC Class 5; dimensional accuracy to ISO tolerance Class 6 and ABMA ABEC Class 3; and width tolerance tighter than ISO tolerance class Normal. Advanced sealing designs maximize grease retention and protect against contaminants without compromising...

Read More »
Motor Controllers and Drives

Specialty Motors Launches Integrated Intelligent I² Motor

I2 Motor combines drivers, controllers, and feedback devices within a brushless DC servomotor. Valencia, CA (November 1, 2007) - Specialty Motors, a manufacturer of custom engineered fractional horsepower electric motors, has announced its entry into the integrated motion control market with the introduction of the I2 Integrated Motor and Controller (patent pending). The I2 (for Integrated,...

Read More »
Turbines

Parker Awarded Ohio Grant to Advance Wind Energy Technology

CLEVELAND, March 26 / - Parker Hannifin (NYSE:PH), the world leader in motion and control technologies, today announced that it was awarded a $1 million grant from the Ohio Third Frontier Advanced Energy Program for the commercialization of a hydraulic system developed by Parker for use in wind turbines. The targeted global wind turbine market for this technology is growing at over 20 percent per...

Read More »
Self Lubricating Belts and Long Life Chains
Pulleys

Self Lubricating Belts and Long Life Chains

W. M. Berg is a worldwide source for miniature motion control and linear power transmission components. Berg offers a complete range of bearings, sprockets and pulleys, and timing belts and chains and precision spur, helical, worm and anti backlash gears offering engineers the largest design criteria available. Berg adds lightweight belts and stainless steel chains series to it's belt, chains and...

Read More »
Engines

Three John Deere 4.5L Engine Models Earn EPA and EU Certification

PowerTech E and PowerTech M Engines in Full Production WATERLOO, IA (November 27, 2007) - John Deere Power Systems (JDPS) is pleased to announce that three new models of their 4.5L engine have received Tier 3/Stage III A certification from the Environmental Protection Agency (EPA) and the European Union (EU). The turbocharged PowerTech(TM) E 4.5L, the turbocharged PowerTech M 4.5L, and the...

Read More »

All Topics