Turbines

GE Signs Largest Wind Services Agreement in Europe to Date with Cobra Energia

10-Year Contract Selected to Support Reliable Wind Power for 178 Wind Turbines across Eight Sites MADRID - GE (NYSE: GE) has signed a 10-year contract with Spanish wind developer Cobra Energia to provide advanced services for 178 GE wind turbines installed at eight wind farms across Spain. The agreement is GE's largest wind energy services contract in Europe and reinforces the company's position...

Read More »
Worm Gears are offered in PEEK(TM) or Delrin®.
Gears

Worm Gears are offered in PEEK(TM) or Delrin®.

Manufactured with worms and wheels of same material, Peek(TM) GF30® and Delrin® POM gears are made to Quality Grade 8e25 DIN 3974 and available with different bore sizes, keyways, and tapped/pin holes. Worms and wheels, from 0.5-3.0 Mod as standard, are all available in 1, 2, 3 or 4 starts. Worms, worm shafts, and wheels are designed to be run together in Peek GF30® (light...

Read More »
Evaporators

Behr Returns as SAE World Congress Exhibitor in 2011

TROY, Mich. - Behr America will showcase its latest electric and hybrid-electric vehicle technology as well as a variety of engine-mounted components for downsized engines at this spring's SAE International World Congress scheduled for April 12-14 in Detroit. After a three-year absence, Behr will return to the SAE (Society of Automotive Engineers) program with a 400-square-foot "island" display...

Read More »
Controls and Controllers

Holo-Krome Division of Fastenal Buys AFC-Holcroft Mesh Belt System

Holo-Krome division of Fastenal has placed an order for an AFC-Holcroft mesh belt system, with a capacity of 2000 lb/hr. The equipment will be used for neutral hardening and carburizing of cap screws and set screws of various sizes. AFC-Holcroft will supply a new hardening furnace equipped with a burner management system and AFC-Holcroft's BeltMaster(TM) control system for CQI-9 compliance. The...

Read More »
Starters

GE Oil & Gas Selected for $120M Trans Europa Naturgas Pipeline Upgrade

German Compression Stations Equipment Upgrade to Lowers Emissions and Boost Performance FLORENCE, Italy - GE Oil & Gas has been awarded a contract of more than $120 million ( Euros90 million) to overhaul nine gas turbines located at four compression stations along the Trans Europa Naturgas Pipeline (TENP), which runs across Germany from the Dutch to the Swiss border. GE Oil & Gas will convert the...

Read More »
Turbochargers

BorgWarner Boosts Performance of Downsized Diesel Engines

BorgWarner's Variable Turbine Geometry (VTG) Turbochargers Set New Benchmark in Lower CO2 Emissions for 1.6-Liter Diesel Engines AUBURN HILLS, Mich. - BorgWarner now supplies the latest generation of variable turbine geometry (VTG) turbochargers for the newly developed 1.6-liter four-cylinder common-rail diesel engines featured in the new MINI family. The downsized engine is available with a...

Read More »
Die Table Provided to Automobile Parts Supplier for Faster Exchange of Dies Utilizes Serapid Telescopic Push-Pull System
Handling Equipment

Die Table Provided to Automobile Parts Supplier for Faster Exchange of Dies Utilizes Serapid Telescopic Push-Pull System

SERAPID, Inc recently designed and built a Die Table for faster exchange of dies for an automobile parts supplier utilizing the RollBeam Telescopic Push-Pull actuator. The Die Table has a 12 ton capacity for dies measuring up to 54 inches by 120 inches. The dies travel at a speed of 10 feet per minute approximately 110 inches in and out of the press. A pair of engineered bolster extensions hinged...

Read More »
Electrical Power Generators

Tapping into India's Growing Natural Gas Supply, New Power Project to Feature GE Advanced Gas Turbine Technology

Sravanthi Energy's 450-Megawatt Project in Kashipur to Help Meet the Country's Growing Power Needs KASHIPUR, INDIA - Sravanthi Energy, an emerging private power developer in India, has selected GE's (NYSE: GE) flexible gas turbine technology to help meet the growing demand for cleaner, more efficient ways to address the country's rapidly expanding energy needs. A new power plant in the Northern...

Read More »
Linear Motor Kits are suited for low profile applications.
Motors

Linear Motor Kits are suited for low profile applications.

To accommodate needs of scanning and imaging systems, custom micro-linear motor kits feature air-core linear motors that function with servo drives and offer true sinusoidal torque curves. In single- or multi-phase configurations, units can function as limited travel actuators or linear motors and integrate with sinusoidal motor controller electronics. Initial models have profiles below 0.5 in.,...

Read More »
Miniature Parallel Grippers offer grip force of 15-25 lb.
Actuators

Miniature Parallel Grippers offer grip force of 15-25 lb.

Equipped with S-7 tool steel jaws that ride on Armoloy TDC shafts, AGP Series features guided wedge design that offers optimal jaw centering, suitable for use in tight spaces with short strokes. Pneumatically actuated, double acting grippers are available in 2 bore sizes of .75 and 1 in. and 2 stroke sizes up to Â-¼ in., yet total height of assembly is 1.47 in. Optional switch kits allow use...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers