New Holders Products

Fused Inlet is VDE and cURus approved.

Series 4707 Fused Inlet is available with single or double pole slotted screw type fuseholders for 5 x 20 mm fuses. Rated at 250 V at 10 A, inlet includes 2 fuseholders rated to IP65. Classed as PC2 (IEC/EN 60127-6), fuseholders guard against accidental shock when fuses are changed. Maximum power acceptance is 2 x 1.6 W, and wire terminations are 6.3mm quick-connects or solder. Inlet complies...

Expansion Arbors help grind gears.

FORTIS arbors clamp work pieces or tools for gear grinding and hobb sharpening. High inner pressure when actuated stretches steel concentrically, providing constant clamping and vibration dampening. Total indicator run out is less than 0.00012 in. Concentricity of arbors is maintained within 0.005 mm between OD and ID. Arbors are sealed against contamination, allowing them to be used in machining...

Holder System offers +/- 0.01 in. tolerance in 4 axes.

FlexLoc Convertible Holder System for indexing conveyors provides nearly infinite number of interchangeable machined part-holders or cleats that mount on common, extruded urethane profile. Profile is ultrasonically welded to surface of reinforced urethane belt, and mates to slot in bottom of part holder, cleat or part-holder sub-plate. Profile pitch error of +/-0.02 in., inherent when profile is...

Card Guides hold cards vertical.

VMCGN Vertical Mounting Card Guides are available with #4-40 and M-3 threaded inserts. M3 mounting hardware is included but #4-40 mounting hardware is not supplied. Units have extension piece made out of flame retardant material that can be bought separately to add height to guides.

Bearing Solutions For Recreational Applications

This white paper provides and overview of bearing solutions for recreational applications.

Label Holder also works as sign clip.

Designed for C-channel shelving, LPHT30 shelf edge label strip has built in continuous grip integrated into clear front window for instant insertion of promotional signs. It eliminates need for extra hardware or grip clips when hanging signs off continuous shelf strips. Sign stock of 8 to 10 point is recommended.

Coil Steel Hold-Down Device offers heavy-duty components.

CoilSafe2000 holds down coil steel while it is being loaded to material feed lines, permits safe band snipping, and prevents coil unwinding. Stand-alone unit is floor mounted, and adapts to existing material feed lines. It offers pneumatic operation with 600 PSI hold-down pressure, and does not require electrical power. Device accommodates coil sizes from 36 to 72+ in. with minimum stock width of...

Holding Assemblies are used in metal product manufacturing.

Permanent Magnetic Holding Assemblies are designed for positioning, stabilizing, holding, and feeding materials, parts, and scrap. Various standard configurations and sizes are available with insulated Ceramic, Alnico, and Rare Earth Magnets. Assemblies for watertight and high-temperature applications are also available.

Shrink Fit Tool creates chatter-free machining.

Tru-Therm induction heating/cooling unit can handle toolholders and cutting tools from 3/16 to 2 in. dia. Four different size induction coils come with system. Coils can be changed in 5 sec without need to power down system. This allows operator to use most efficient size coil for every holder. Touch-screen programming and simple cutting tool menu allow operator to specify tool size and cutting...

Saddle accommodates wire bundles.

Model MBHWSSE is available in 2 different sizes to accommodate 2 different wire bundle ranges. Wires can easily be inserted into side of saddle to protect from abrasion. Mounting method is suitable for locking into round, threaded, punched, drilled or blind holes in wood, metal and particle board and more. Micro size is ideal for low profile applications and takes up very little real estate.

Tool Lanyards comply with OSHA guidelines.

Miller-® Bandit(TM) Tool Holder and Miller WristBandit Tool Holder prevent workers from dropping tools at heights. Miller Bandit Lanyard Tool Holder attaches to workers' waist belts while allowing freedom of movement. It is constructed of stretchable cord surrounded by nylon tubular webbing, and stretches from 26 to 43 in. Miller WristBandit Tool Holder attaches to workers' wrists using Velcro....

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.