Insert Holders offer adjustable chamfering angle.
Designed for TW Series twin boring heads, Insert Holders accept ISO standard SC inserts and allow infinite adjustment of insert pocket between 15 and 75Ã-
Read More »
Signboards draw attention to tradeshow booths.
Featuring top and bottom track design, ProfileHeader open-face signboards facilitate insertion of graphic card material to channel. Constructed of plastic, units are suited for indoor and outdoor applications. Signboards are available in 12 x 48 in. size to hold 12 in. tall material, and 8 x 56 in. to hold 8 in. tall material. Adapter track, located at back of signboard, runs entire width and can...
Read More »
Compact Toolholder is suited for high-speed applications.
Offering run-out accuracy of less than 3 microns and feed rate up to 20 m/min, TRIBOS-RM is designed for cutting speeds up to 50,000 rpm in applications that require low interference. Clamping process, which uses elastic forces of material to clamp tool shank, can be done within 30 sec via SVP-2 (manual) or SVP-3 (automatic) clamping device together with corresponding reduction inserts. Due to...
Read More »
New Tool Tower for CAPTO Tooling
Huot's Tool Tower is now available for CAPTOÃ-® tooling. The tower is specially fabricated to hold C5 CAPTO tooling. It comes with specially molded, nylon insert rings designed to securely fit CAPTO tooling. The inserts protect the CAPTO tooling from damage and nicks when taking tooling in and out of storage. The 3 foot high tower provides cost-effective, free-standing storage at the...
Read More »
Choosing the Optimal Electronics Manufacturer
This eBook covers the various factors to consider when selecting an electronics manufacturer, including experience, turnaround times, and more.
Read More »
Toolholding System clamps tools without generating heat.
Featuring holder, collet, and mini-press generating 6 tons of force, powRgripÃ-® collet system relies on interference between holder and collet to generate clamping force, with run-out below 0.0001 in. Available from 1/8-Ã-¾ in., including metric sizes, interchangeable collets will hold both carbide and HSS tools. Less than 10 sec are needed to press in tool or remove it from holder, and...
Read More »More Thermolock-® Shrink-Fit Tool Changers & Toolholders Available from Command Tooling Systems
RAMSEY, MN-Command Tooling Systems has announced the expansion of its ThermoLockÃ-® Shrink-Fit product line with the addition of metric BT, DIN & various HSK toolholders, 3Ã-º tapered nose extensions along with five new tool changers, making this extensive new offering of shrink-fit solutions one of the most comprehensive industry-wide. CommandÃ-® ThermoLock toolholders and extensions...
Read More »
Adjustment Free Rotary Broaching Tool Holder
Slater Tools Inc. is announcing the release of a new Adjustment Free Rotary Broaching Tool Holder designed for swiss type machines. Swiss type tools are increasingly popular due to their use in aerospace and medical applications, such as with orthopedic bone screws and other micro fastener products. Slater's new adjustment free design allows the operator to use the tool holder without the need...
Read More »
Circuit Board Supports hold wires and bundles.
EZ Twist lock circuit board supports feature locking base that snaps into chassis by hand to enable loading and unloading of cables and wires with twist of fingers. Additional arm inside twist lock holds smaller wires or bundles. Molded in natural nylon 6/6, parts fit 4.75 mm dia hole and panel thickness of .76-1.98 mm.
Read More »
Blank Bars Integrated with BIG PLUS CAT Shanks Now Available from BIG Kaiser
Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. now offers customers the ability to make custom tool holders from Blank Bars integrated with BIG PLUS tapers. BIG PLUS Blank Bars are available for CAT40 and CAT50 spindle types. The CAT40 blanks are offered in 2.5 and 4 diameters with lengths of 8 and 6 , respectively. CAT50 blanks are offered in 4 and 6 diameters with a length of 8 ....
Read More »
Wristband keeps tools close at hand.
Magnogrip tool wristband helps prevent do-it yourselfers (DIYs) and professional contractors from dropping or losing nails, screws, and tools while working on projects. While embedded magnets are strong enough to securely hold hammer, product itself is lightweight and comfortable to wear. It is made of synthetic canvas and will expand to fit any wrist.
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
