New Thermal & Heating Equipment Products

Heat Exchangers and Chillers have non-ferrous water circuits.

CLIMET-HE(TM) regenerative turbine-pump and CLIMET-HE-200 brazed-plate heat exchangers operate from 380-460 and 200-240 Vac, respectively. Thermal capacity of 44kW handles all plasma guns. CLIMET-RC(TM) Refrigerated Chiller works in tandem with CLIMET-HE, supplying chilled water to cool heat exchanger at up to 98 l/min and at temperatures as low as 7-°C. CLIMET-RC-HV(TM), rated at 16.4 kW, has...

Clean Process Oven for semiconductor industry.

LCC2-14 has chamber volume of 14 cu ft, large enough to handle thermal processing of 200 and 300 mm semiconductor wafers. It has stainless steel interior with continuously welded seams to protect work chamber from contamination. Oven is SEMI S2 and CE compliant, can be configured for multiple voltages and 50/60 Hz, and has UL and C-UL listed open control panel with lockable disconnect switch....

Rotary Switches withstand shock and vibration.

Detent-Action Rotary Multipole and Selector Switches for military applications permit multiple decks in single switch, and each deck can contain multiple contacts. Glass alkyd moldings provide tight, insulated compartments that separate one contact assembly from another. Standard models are available with up to 25 sections, 75 poles, and 16 positions. Double-sided, double-wiping, self-cleaning,...

Cable Jacket is PVC laminated.

DVH-20 jacketing is constructed from medium-weight, flame-retardant PVC, laminated to both sides of polyester cloth. Reinforced construction provides resistance to wear, tears, and abrasion. Operating temperature is -40 to +85 deg C. Jacket is available for flat or round cable bundles from 3/8 to 4 in. in variety of colors.

Speciality Heat Exchangers 101: Considerations for Choosing the Right One for Your Application

Specialty heat exchangers play an important role in a wide variety of industrial applications, and it's crucial to select the correct device for your application. Check out this guide and learn how to choose the right heat exchanger.

Primer-Free Threaded Inserts resist galvanic corrosion.

Stainless steel Heli-Coil inserts, manufactured to military and metric aerospace standards, eliminate need for applying zinc chromate primer. Resin-bonded, fluoropolymer coating creates barrier between insert and parent material. Coating also provides additional lubricity, easing installation in anodized and chemically treated holes and allowing for consistent prevailing torque with screw-lock...

Inserts press into plastic without melting.

Series 50 through-hole and Series 51 headed, through-hole press-in brass inserts can be cold pressed into plastic without heat or ultrasonic equipment. Inserts have helical knurl that optimizes plastic migration, providing good pull-out and torque resistance. Inserts can be installed with arbor press or fully automated machine into ABS and polycarbonate plastics. Applications include securing...

Physical Layer Switch provides interoperability.

IntellaPatch FC32 is a 2 Gigabit Fibre Channel layer 1 switch that automates electronic cable pull simulation. It comes with 32 ports that use small form-factor pluggable transceivers. Users can store up to 16 frequently used configurations in non-volatile memory. Switch connects to Ethernet network, allowing users to remotely control up to 32 independent physical layer switches from single...

Filter Dryer produces dry cakes.

RT(R) filter can be used with either hot-gas drying or infrared drying. Filter is available in open, fume tight, gas tight, and pressure tight configurations, and with full sanitary configuration to meet cGMP requirements. For hot-gas drying, segmented tray design makes it easy to use specific tray sections as hot gas drying zones. Hot gas can be air, nitrogen, or steam. Infrared drying can be...

Photoresist Oven allows automated handling of 300 mm wafers.

Company's 300mm Automated Photoresist Bake Oven offers 2 Front-Opening Unified Pod (FOUP) loadport stations with atmospheric Class 1 clean room-compatible robots and optically based Class 1 laser cassette mapping sensors. Its 2 heat treatment chambers hold 25 wafers each during photoresist bake cycle. Temperature uniformity is +/-1.5 deg C at 95 deg C operating temperature (150 deg C max). It...

Walk-In Oven provides 500 deg gas heat.

No. 884 offers workspace dimensions of 52 in. wide, 48 in. deep, and 72 in. high. It is heated by modulating natural gas burner, which provides 350,000 Btu/hr, while 4200 cfm, 3 hp recirculating blower provides horizontal airflow across workload. Oven has stainless steel exterior with #4 brushed finish, Type 430 stainless steel interior, 4 in. thick insulated walls, and 2 in. thick insulated...

Acoustic and Thermal Solutions for Original Equipment Manufacturers

Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.