Induction Heaters

Un-Brazing and Re-Brazing Copper Angle Brackets to Copper Strips at 1400
HVAC

Un-Brazing and Re-Brazing Copper Angle Brackets to Copper Strips at 1400

December 4th, 2017 - The efficiency of UltraFlex Power Technologies Induction Heating systems has recently been demonstrated by the company’s engineers in a series of controlled tests. The goal of the tests was to evaluate the unbrazing and rebrazing capabilities of UltraFlex High Power Induction System from the UltraHeat L Series. Two sets of materials were used for the tests: a copper right...

Read More »
Reflowing Solder on Copper Boards in Less than 5 Seconds Using UltraFlex Induction Heating
HVAC

Reflowing Solder on Copper Boards in Less than 5 Seconds Using UltraFlex Induction Heating

November 17th, 2017 - UltraFlex Power Technologies recently demonstrated the excellent performance of their compact Induction Heating systems by showing how copper boards can get re-soldered within less than 5 seconds. A small copper connector board with dimensions 42mm x 17.5mm (1.65″ x 0.69″) and 3 pins on one side / 6 on the other had to be heated to 260°C (500°F) so solder on the board...

Read More »
eldec MICO Induction Heating Systems
HVAC

eldec MICO Induction Heating Systems

Compact and Flexible, Stationary or Mobile, Efficient and Practical The MICO series' innovative design integrates the frequency converter and coolant system in a single housing. Small and compact, stationary or mobile, they are a flexible and practical solution for a wide range of uses including: induction brazing shrink fitting annealing die edge hardening curing Available in S (stationary),...

Read More »

Ajax TOCCO Supplies Induction Billet Heating System
HVAC

Ajax TOCCO Supplies Induction Billet Heating System

Ajax TOCCO Magnethermic recently shipped a 1000 kW PowerZone billet heating system to LC Manufacturing, located in Lake City, MI. The 1000 kW, 1.3 – 3.3 kHz system is designed to heat 1.06” to 2.875” diameter x 6.0” to 20.0” long carbon steel billets to forging temperatures. The system includes automatic changing of frequency for differing billet sizes. A PLC with touch screen display...

Read More »
Designing and Specifying the Right Loudspeaker System for Emergency Mass Notification in Public Venues
Sponsored

Designing and Specifying the Right Loudspeaker System for Emergency Mass Notification in Public Venues

For every industry, there is nothing more crucial than having effective strategies for dealing with emergency situations. These are events you never hope for, but want the assurance of having the right solutions implemented when time is of the essence. Loudspeaker system optimization is essential when ensuring that communication is not lost when it is most needed. In this guide, you will learn about what key points to keep in mind when designing a loudspeaker system for your campus. This includes performing an on-site sound survey, selecting the right equipment for your applications, complementing your system with the right technology solutions, creating pre-assigned messages for different emergency situations, and having system accessibility no matter the circumstances. Download this guide for additional information on these public safety measures.

Read More »

Ambrell Sells EASYHEAT for Soldering Application
HVAC

Ambrell Sells EASYHEAT for Soldering Application

The induction system is being used to create a product for the industrial automation market Scottsville, NY – Ambrell, a leading manufacturer of induction heating systems, has sold an EASYHEAT™ 6 kW, 150-400 kHz induction heating system to a manufacturer of industrial automation controls and sensors. The application involved heating six brass block and carbon contact assemblies to 242 °C...

Read More »
Ajax TOCCO Supplies 100kHz Induction Dryer for Steel Strip Coating
Fluid & Gas Flow Equipment

Ajax TOCCO Supplies 100kHz Induction Dryer for Steel Strip Coating

Ajax TOCCO Magnethermic recently shipped a 1900 kW / 100,000 hz induction heating dryer system to a steel strip galvanizing producer in China for the drying of coatings including Passivation, with and without chrome products, and organics. This high powered induction dryer is designed to heat steel strip 0.40 mm to 2.50 mm thick, and 800 mm to 1676 mm wide at a rate of 220 meters / minute or 116...

Read More »
Induction Heater fosters safe and serviceable deployment.
HVAC

Induction Heater fosters safe and serviceable deployment.

Making induction processes safe and serviceable, EKOHEAT products are built using universal PCB and feature Versatile Performance Architecture (VPA) technology. EKOHEAT VPA integrates into manufacturing systems or performs as stand-alone induction heating solution. AUTOSCAN capability lets user expand use of product beyond its current application, industrial Ethernet communication capabilities...

Read More »
Rolling Inductor Heating System uses IR temperature sensor.
HVAC

Rolling Inductor Heating System uses IR temperature sensor.

Compact and portable, Miller® ProHeat™ Rolling Inductor Heating System evenly distributes heat into workpiece, eliminating inconsistencies and quality issues associated with open-flame-torch heating methods. With optional Infrared Temperature Sensor, users can set and achieve targeted preheat temperatures. Travel Detection system minimizes potential for hot spots by controlling heating output...

Read More »

Ajax TOCCO Supplies Air-Cooled Induction Weld Preheat System
Electrical Equipment & Systems

Ajax TOCCO Supplies Air-Cooled Induction Weld Preheat System

Ajax TOCCO Magnethermic recently delivered 5 / 10 kW TOCCOtron AC induction heating systems to an international on-site heat treating firm. These systems are designed for portable / on-site preheat prior to welding applications. The customer chose these systems over larger 35 kW induction heating systems due to significantly less equipment costs. At 5 kW continuous output, the customer stated the...

Read More »

Ambrell Sells an EASYHEAT for University Applications
HVAC

Ambrell Sells an EASYHEAT for University Applications

The induction heating system will be used for class demonstrations and research Scottsville, NY – Ambrell, a leading manufacturer of induction heating systems, has sold an EASYHEAT 2 kW/150-400 kHz induction heating system to a university. The professor who purchased the system plans to use it for demonstrations that will be part of an engineering class. It will also be leveraged for research...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics