Ultraflex Induction Brazing Steel Parts in Under 8 Seconds
[July 17th, 2019] UltraFlex Power Technologies - a leading manufacturer of digitally controlled induction heaters - recently shared the results from a customer-requested induction brazing scenario. The customer - a company operating in the sphere of Appliances and HVAC - was looking to replace the traditional torch heating-based brazing process for steel parts with induction brazing. The parts to...
Read More »
Bench Oven from Grieve Comes with 300 CFM, 1/3-HP Recirculating Blower
Equipped with eight (8) drawers with dimensions of 6” W x 13” D x 6” H with removable insert to close around cord. Features 2 in. insulated walls, Type 304, 2B finish stainless steel interior and exterior. Includes digital indicating temperature controller, manual reset excess temperature interlock and recirculating blower airflow safety switch.
Read More »
New QSW-308-1C and QSW-308S Features Three 10GbE SFP+ Ports
Swithces provide 10GbE solution to satisfy 10GbE/1GbE network infrastructures in homes and offices. Features plug-and-play for simple set-up and auto-negotiation for optimal speed. Equipped with eight Gigabit ports for users to optimize high-speed networking.
Read More »
New EchoTherm Model IC20XR Dry Bath Meets UL, CSA, and CE Standards
Comes with count-down timer in days, hours, minutes and seconds to 30 days; data logger; and RS232 I/O port. Measures 6.5" (165 mm) width, 8.75" (222 mm) depth and 3.5" (89 mm) height. Temperature ranges from -10°C to 110°C.
Read More »
How to Select a Thermal Fluid Heater for Your Process
Do you know the important factors you should consider when comparing different types of thermal fluid heaters?
Read More »
UltraFlex Soldering a Coaxial Cable to Connector Ring and Pin at 500°F (260°C) Within mere 5 Seconds
July 5th, 2019] UltraFlex - a leading manufacturer of advanced, digitally-controlled induction heaters - has once again demonstrated the time- and cost-efficiency of induction heating for manufacturing purposes. The subject of the company’s recent demonstration had been the soldering of a coaxial cable to cable connector ring and center pin - a test scenario set up per the request of a...
Read More »
New Dual Point Mini Cooler Operates at Quiet 76 dBA
Provides a stream of 20 degrees F cold air to prevent heat buildup, reduce downtime and increase productivity. Eliminates burning, melting and heat related breakage. Ideal for cooling sewing needles, blades, small tools and lens grinding applications.
Read More »
New CRYO-powRgrip Technology is Based on Standard Toolholders
Eliminates secondary cleaning operations, for medical industry part-production operations. Helps to increase the tool life and productivity. Enables high-speed cutting in the toughest materials.
Read More »
Wisconsin Oven Ships Top Flow Conveyor Oven to Manufacturer In Machinery Industry
Wisconsin Oven Corporation announced the shipment of one (1) Electrically Heated Top Flow Conveyor Oven to a global manufacturer in the machinery industry. The oven will be used for curing “CPIG” material on plastic housings for electronic components. The conveyor oven has a maximum oven operating temperature of 200°C and work chamber dimensions of 2’4” wide x 21’0" long x 9" high....
Read More »
Thermal Product Solutions Ships Gruenberg Cleanroom Ovens to Medical Industry
Thermal Product Solutions, a global manufacturer of thermal-processing equipment, announced the shipment of six (6) Gruenberg Cleanroom Ovens to the Medical Industry. These Gruenberg unitized ovens has a maximum temperature rating of 149°C with work chamber dimensions of 26” W x 26” D x 34” H. The Gruenberg cleanroom ovens were constructed from a structural steel frame that supported the...
Read More »
New TK Tactile Mini Trim Switch is Designed for Grips and Control Panels
Offers unsealed, dusttight to IP64, and watertight to IP68S sealing level choices. Features are 4-way, logic level, momentary contact switch and pushbutton option. Ideal for aircraft, off-road and material handling applications.
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
