New CO2 Series Heat Exchangers Feature Reliability of 120/60 Bar Design Pressure Rating
The SLHE CO2 Series Heat Exchangers are available in 5 common sizes of suction. The products are suitable for used for enhanced evaporator capacity, system stability, compressor protection and oil return. They are can be used for standard low, medium and high temperature refrigeration systems up to subcooling of 60ºF.
Read More »
ASME Heat Exchanger bolsters nylon process system.
Manufactured as part of multi-vessel contract forÂ- nylon process installation, ASME Shell and Tube Heat Exchanger features 22 in. OD vessel and 81.5 in. straight tube length. Vessel and U-tube material is SA-240-316L and SA-249-316L. Nominal rating is to 230 psi @ 600°F and full vacuum with external jacket design of 86 psi @ 600°F....
Read More »
Sandvik Sets the Standard with Project Win for Nanjing, China
Sandvik Materials Technology has been awarded the contract to supply specialist heat exchanger tubes to a prestigious chemical green field project in Nanjing, China. More than 400 tonnes of duplex tubes, including both straight and U-bend, are to be supplied and installed at a world-scale Propylene Oxide (PO) production plant with the first quantities being delivered in October 2014 and...
Read More »
Ametek Fluoropolymer Heat Exchangers Stand up to Demanding Processes of McGean Specialty Chemicals
CLEVELAND, OH - For more than 20 years, McGean Specialty Chemicals has relied on shell and tube heat exchangers from AMETEK Fluoropolymer Products to cool critical batch chemical processes. McGean, a global leader in niche specialty chemicals, is for known for its proprietary manufacturing capabilities and the diverse range of specialty chemicals it produces. McGean specializes in small- to...
Read More »
Seal Stuff In, Seal Stuff Out
One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?
Read More »Brazed Plate Heat Exchangers feature double-wall construction.
Designed with complete peripheral copper braze for strength and 4 dedicated leak ports for leak detection, BPX(TM) BPDW Series features design pressure of 435 psi and max design temperature of 450°F. Double-wall heat exchangers are suited for residential hydronic heating applications such as radiant, snow melt, domestic hot water, and pool heating. They can also be used as refrigerant...
Read More »
ITT Standard Heat Exchangers Receive New ARI Certification
ITT Standard has announced that its popular line of Plateflow gasketed plate-and-frame heat exchangers is among the first in the industry to receive the Air-Conditioning and Refrigeration Institute's (ARI) new certification for liquid-to-liquid heat exchangers. The recently initiated ARI Standard 400 certification designates product performance excellence and was developed to provide a common and...
Read More »Increased Capacity of Shell & Tube Heat Exchangers from Fluorotherm Polymers
Increased Capacity of Shell & Tube Heat Exchangers from Fluorotherm Polymers Fluorotherm has successfully developed and installed multiple fluoropolymer coil shell and tube heat exchangers with significant increase in the heat transfer surface area from 12 sq.ft (1.1 sq.mt) to 55 sq.ft (5.1 sq.mt). Tubing is available in FEP, PFA, High Purity PFA and PTFE materials. Popular shell side materials...
Read More »
Heat Exchangers feature UHP PFA tubing.
Incorporating honeycomb construction, Ultra-High Purity Shell and Tube Heat Exchangers are single pass, counter current designs suited for heating and cooling ultrapure water, acids, and other corrosive chemicals used in electronics, pharmaceutical, and semiconductor manufacture. Units are available in shell diameters ranging from 3-14 in. with fluoropolymer lining. All lined metal heat exchanger...
Read More »
Thermoplastic Heat Exchangers are corrosion resistant.
Available in PFA, E-CTFE, PVDF, and PP, Polytetra Series heat exchangers can divert flow to side of shell, to avoid high fluid flow forces that may damage thin-wall internal tubes of shell and tube style heat exchanger. Customizable heat exchangers are suited for electroplating industries and clean chemistry applications, such as photovoltaic and semiconductor processes.
Read More »
Advanced Shell & Tube Manufacturing for Refinery & Power Plants
DHT is a manufacturer of a full range of heat exchangers and heat transfer products for over 60 years. Our standard product line includes shell and tube exchangers, brazed plate and plate and frame heat exchangers meeting ASME, U&R Stamp, TEMA, HEI, API and HTRI codes. Diversified Heat Transfer has been awarded contracts for shell & tube heat exchanger manufacturing for the refining and power...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
