Switches

HDBaseT/HDMI Extenders support signal extension up to 600 ft.

Designed for commercial and residential applications, KD-X400ProK and KD-X600ProK are HDBaseT/HDMI via Single CAT5e/6 Extenders supporting Ultra HD/4K, EDID control, hot plug control, full buffer system, IR sensor, and Up/Down IR RS-232. KD-X400ProK supports signal extension up to 150 ftÂ- at 4K/24/25/30/60 using KD-CAT6STP1X cabling. In Long Range Mode, KD-X600ProK enables signal extension...

Read More »
GaN Power Transistor offers current capability up to 60 A.
Switches

GaN Power Transistor offers current capability up to 60 A.

Based on FOM Island Technology® die design, GS66516T 650 V E-Mode Power Switch features topside cooling configuration, which allows it to be cooled using conventional heat sink or fan cooling. Device includes reverse current capability, integral source sense, and zero reverse recovery loss. Housed in 9.0 x 7.6 x 0.45 mm GaNPX™ packaging, transistor is suited for on-board battery chargers,...

Read More »
Heat Exchanger supports applications up to 4 million BTU's.
Exchangers

Heat Exchanger supports applications up to 4 million BTU's.

Incorporating S.I.M.S. technology, Spirax EasiHeat DHW delivers constant supply of hot water at stable temperature on demand, even with sudden wide load changes. Spirax Intelligent Monitoring System enables monitoring, diagnostics, and status communications. Information can be accessed remotely over Internet, through existing onsite communication systems, orÂ- through SMS text...

Read More »
BTU Will Demonstrate the PYRAMAX at ACI's Tech Expo
Ovens

BTU Will Demonstrate the PYRAMAX at ACI's Tech Expo

NORTH BILLERICA, Mass. - BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing and alternative energy markets, will participate in ACI Technologies’ second annual Tech Expo, scheduled to take place May 20-21, 2015, at its facility in Philadelphia, PA. Robert DiMatteo, senior regional sales manager at BTU, will demonstrate the...

Read More »
Bentek's Power Economizer Integrated Into RSS Reduces Power Consumption by 50 Percent
Controls and Controllers

Bentek's Power Economizer Integrated Into RSS Reduces Power Consumption by 50 Percent

SAN JOSE, CA –Â- Bentek, a manufacturer of a broad range of OEM power distribution products for the residential, commercial and utility-scale solar PV marketplaces, has successfully integrated the Bentek proprietary Power Economizer into the Bentek Residential Rapid Shutdown System (RSS). “The Power Economizer is a Bentek proprietary designed printed circuit board assembly (PCBA), and...

Read More »
High Purity Media and Bio Processing Solutions from a Single Source
Boilers

High Purity Media and Bio Processing Solutions from a Single Source

High purity media and bio processing solutions from a single source: three market launches from Bosch Focus on flexibility and energy efficiency • New bioreactor for laboratory-scale development of active ingredients • WFI unit with new generation process reduces energy consumption • New generation of pure steam generators with high yields Frankfurt/Main, Germany – At Achema 2015, Bosch...

Read More »
Thermal Module ensures motor protection.
Sensors / Detectors / Transducers

Thermal Module ensures motor protection.

Serving as accessory to ETEL's torque motors, IMTHP Thermal Module provides absolute motor protection from overheating. While monitoring readings from 3 KTY thermistors, unit uses built-in algorithm to detect any steady increase in KTY sensor output. IMTHP provides corrected analog temperature signal, allowing precise and continuous monitoring of actual temperature in motor. It also outputs...

Read More »
Air / Hot Air Dryers

PCS Demonstrates Atomization Capabilities for Fibrous Materials

PCS Demonstrates Atomization Capabilities for Fibrous Materials Payson, Arizona — Pulse Combustion Systems (PCS) is pleased to announce that it has demonstrated new atomization capabilities of its Pulse Combustion Spray Dryers. We are excited about our ability to atomize and dry slurries of large-fiber materials that would instantly clog the nozzle of a conventional tall-form spray dryer," said...

Read More »
Brooks Automation and BioCision Win ISBER 2015 New Product of the Year Award for CryoPod(TM) Carrier
Miscellaneous Storage Equipment

Brooks Automation and BioCision Win ISBER 2015 New Product of the Year Award for CryoPod(TM) Carrier

PHOENIX, ArizonaÂ- – The CryoPod™ carrier, jointly developed by Brooks Automation, a global provider of automated sample storage systems for compound management and biorepositories and BioCision, LLC, a leader in advanced biomaterial sample handling and standardization tools, has won the 2015 New Product of the Year award from the International Society for Biological and Environmental...

Read More »
Top-Actuated SPST NO Switches have low-profile, SMT design.
Switches

Top-Actuated SPST NO Switches have low-profile, SMT design.

With 3.0 x 2.0 mm footprint and 0.58 mm board-mounted profile, KXT Series includes momentary action switches suited for applications, such as wearable electronics and portable devices, requiring ultra-miniature components. Travel distance is 0.13 mm ±0.05 mm, and available operating forces include 100 gf (±30), 180 gf (±50), and 240 gf (±70). Rated for 12 Vdc/50 mA and -30...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics