Marine Hinges keep hatch doors closed.
Positioning-Advantage Hinge and Door-Positioning Hinge hold doors open and closed at pre-set angles without secondary mechanical supports, such as door stay or gas spring. Detent mechanisms allow hinge to mechanically stop at certain angles, thus holding door open or closed depending on how detent is set. Constructed from acetal and stainless steel, hinges meet corrosion-resistance requirements...
Read More »
Primer-Free Threaded Inserts resist galvanic corrosion.
Stainless steel Heli-Coil inserts, manufactured to military and metric aerospace standards, eliminate need for applying zinc chromate primer. Resin-bonded, fluoropolymer coating creates barrier between insert and parent material. Coating also provides additional lubricity, easing installation in anodized and chemically treated holes and allowing for consistent prevailing torque with screw-lock...
Read More »Inserts press into plastic without melting.
Series 50 through-hole and Series 51 headed, through-hole press-in brass inserts can be cold pressed into plastic without heat or ultrasonic equipment. Inserts have helical knurl that optimizes plastic migration, providing good pull-out and torque resistance. Inserts can be installed with arbor press or fully automated machine into ABS and polycarbonate plastics. Applications include securing...
Read More »
Die Shims adjust die button height.
Die Button Shims allow users of sharpened die buttons to compensate for removal of metal on cutting surface, and quickly and easily adjust height of die buttons. Shims are offered in 0.005 and 0.015 in. thicknesses for button sizes of 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, and 1 in. Made of hardened steel, they maintain precision thickness under heavy pressure. Shims are sold in 50 piece...
Read More »
Key Considerations When Choosing a Power Cord
This white paper provides an overview of key considerations when choosing a power cord.
Read More »
Vibration-Isolating Workstations fit in small places.
LabMate 9211 Series works in small labs where external vibrations adversely affect operation of sensitive equipment. Tabletops are 24 in. deep with three widths ranging from 24 to 35 in. Automatic leveling and air suspension provide vibration-controlled work environment with low natural frequencies and vertical and horizontal isolation for loads up to 440 lb. Tabletops are made of steel with...
Read More »Heat-Shrinkable Shapes support smaller connectors.
Miniature heat-shrinkable molded shapes fit circular connectors and provide effective protection and strain relief. Available in choice of materials, with optional adhesive lining for environmental sealing, molded parts have operating temperature range from -55 to 200 deg C and are installed by heat-shrinking over leads and connectors to apply strain relief to wires down to 2.1 mm dia....
Read More »
Connector System suits wire harness assemblies.
Model 4.2 Power Economy (PE) series connector system is suited for wire to wire applications that require 4.2 x 4.2 mm centerline spacing. Plastic connector mates and unmates while maintaining positive-latch design. Unit is available in 2 to 24 positions and accommodates receptacle housing with either panel mount or free hanging plug housing. Connector mates with AMP-DUAC connectors and other...
Read More »
Lead Assemblies handle high voltages.
Hi/Mate 12 gauge contact lead assemblies for MIL-C-38999 Series I, III, and IV connectors withstand up to 13.5 kVdc, commonly found in densely packaged, high-voltage power supplies, CRTs, and TWTs. Assemblies are terminated with Hi Voltage FEP cables. Insertion and removal procedures use same tools as standard 38999 connector. Lead assemblies are electrically isolated from connector shell and can...
Read More »
Industrial Ethernet Connectors meet IP67 watertight rating.
Variosub RJ-45 connectors are suitable for fast Ethernet transmissions at 100 Mbps in accordance with Class D or Category 5 of EN 50173. Protects against dirt and moisture, withstands adverse conditions associated with use on machinery and industrial installations, and protects RJ-45 contact insert. Connector is protected against forces pulling mounting and hood sides apart, pulling cables out of...
Read More »
Pin and Sleeve Connectors carry CE mark.
EPIC(R) Pin and Sleeve Connectors conform to IEC 309-2, and are available in North American and International configurations. North American devices are available in 20, 30, 60, and 100 A, while international devices are available in 16, 32, 63, and 125 A. Both versions are available in splash proof (IP44) and watertight (IP67) models. All North American products are UL (UL1682 and UL1686) and...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
