Brass Inserts have hexagonal heads.
Series 40 through-hole and Series 44 blind-end hexagonal, molded-in, brass inserts are suitable for placement in plastic molds prior to plastic injection. They do not require specialized insertion tools, and are manufactured to simplify orientation and placement onto mold core pins. Hexagonal head provides bi-directional torque resistance and large undercut provides high-tensile strength.
Read More »
VESA Connector has total height of 1.24 in.
PC99 colored connector consists of 1 VESA connector sitting atop two PS/2 mini-DIN connectors. 15-pin VESA D-sub connector is made with blue PBT insulator, and has contact No. 9 recessed to allow last mate/first break on 5V supply voltage. Unit is suitable for graphic displays, and complies with DDC standards. Two 6-pin mini-DIN connectors come in PC99 colors with purple PBT insulator on left and...
Read More »
Baffles offer optional hanging system.
Sound-absorbing SONEXvalueline(TM) Baffles reduce noise and reverberation throughout environment. Fitted with stainless steel corkscrew hangers, they can be suspended from ceiling with cables or chains. Both allow baffles to clear lights and fixtures. Baffles can be pushed into place from one side of room, allowing production work to continue. They are Class 1 fire-rated for flame spread and...
Read More »
Workstation provides vibration isolation.
9100 Series is available with load capacity of either 800 or 1300 lbs, and is Class 100 cleanroom compatible. Tabletops range from 24 x 36 in. to 36 x 72 in., and are available in honeycomb or composite. Active-Air Suspension provides vibration-controlled work environment with low natural frequencies. Preset zero deflection level is maintained regardless of load addition or removal. Faraday Cages...
Read More »
Metal Finishing Selection Guide
This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.
Read More »
Leveling Mounts are wash-down and acid-resistant.
Airloc JackmountÃ-® Adjustable PR Series machine leveling mounts are available with rubber or neoprene vibration isolation pads from 40 to 90 durometer with smooth non-skid surfaces. Rubber or neoprene pads come in 5, 10, 15, and 25 mm thicknesses. Offered in all stainless steel or thermoplastic bodies, mounts provide spherical support with Ã-
Read More »
Connection Adapters are available with metric threads.
ADAFLANGE(TM) ADAPTER with face seal is supplied with thru-hole flange. This combination adapts flange port to threaded connection. Supplied with threaded type companion flange, ADAFLANGEPORT(TM) adapts threaded connection to flange connection. Both adapters can be supplied with either clamp or threaded type companion flanges. They are available with 370 Flare, SAE Straight, ORS O-Ring Face Seal,...
Read More »
Bolt Adapters meet SAE specs.
ADAFLANGE(TM) Unified Code U61 4-Bolt and 2-Bolt Adapters mount on SAE Code 61 flange ports. 2-bolt flange adapters have bolt patterns that will mount on either of 2 diagonal tapped holes. 4-Bolt flange adapters may be qualified in higher pressure applications, and eliminate need for larger SAE Code 62 flange port patterns. Smaller flange footprints of both adapters permit ports to be nested...
Read More »
Turning and Milling Inserts are PVD coated.
SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.
Read More »
One-piece Interfaces connect to power boards.
OPP Series one-piece power interface, rated up to 5 A, eliminates bent pin problems of multi-component devices. Connectors are soldered to main board and power board is attached by either metric or English mechanical fasteners. Interfaces are available with choice of 3, 7 or 10 contacts on 0.100 in. pitch. Optional alignment pins can be provided on top, bottom or both sides to ease processing,...
Read More »
Manipulating Arm has variable speed control.
Six-axis Mini-Articularm, mounted on top of omni-directional platform, suits lifting and handling operations. Controlled via corded push button remote controls, joysticks, or wireless radio frequency controllers, system is capable of handling 100 to 250 lbs at 72 in. radius. Parallelogram arm allows load to remain parallel to ground while being raised or lowered. It also rotates 360 deg, and is...
Read More »
Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions
Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.
Read More »
