Connectors

Selected Thomas & Betts Blackburn® EZGround® Compression Connectors Now IEEE 837-2014 Compliant

MEMPHIS, Tenn. – Selected Figure 6 and C-tap connectors from the Blackburn® EZGround® compression connector line from Thomas Betts (TB), a member of the ABB Group, now comply with IEEE Standard 837-2014. The revised standard establishes more rigorous electromagnetic force (EMF) testing requirements for substation grounding applications. A range of EZGround Figure 6 and C-tap...

Read More »
Lightweight Design: ContiTech Develops World's First Polyamide Strut Mount for Passenger Car Chassis
Mounts

Lightweight Design: ContiTech Develops World's First Polyamide Strut Mount for Passenger Car Chassis

- Lightweight variant with fiberglass-reinforced polyamide 25 percent lighter than aluminum design - Enhanced ride comfort thanks to highly insulating rubber element AUBURN HILLS, Mich. - ContiTech Vibration Control - the strut mount specialist based in Hanover, Germany - has developed a strut mount in which fiberglass-reinforced BASF Ultramid polyamide is also used as the primary structural...

Read More »
Omni-Directional Antenna suits in-building wireless networks.
Mounts

Omni-Directional Antenna suits in-building wireless networks.

With PIM rating of less than -150 dBc and coverage from 700–2,700 MHz, HyperLink® HG72705CUPR-NF supports cellular 4G/LTE, Personal Communication Services, and Wi-Fi 802.11b/g wireless networks. Unit can be mounted through single 11/16 in. hole in solid or suspended ceiling that is up to 1 in. thick. Antenna features single 15.7 in. coax lead terminated with N-Female connector....

Read More »
Therapy Equipment

Head and Neck Insert aids proton therapy treatment.

Providing patient positioning and immobilization, kVue™ Portrait™ Proton Head and Neck Insert meets unique requirements of proton therapy. SolutionÂ- is suited for typical proton craniospinal radiotherapy treatments such as whole brain lateral fields combined with PA spine fields due to attenuation being constant throughout device.

Read More »
Modular System enables direct workpiece clamping.
Workholding Systems

Modular System enables direct workpiece clamping.

For applications requiringÂ- small batch sizes, precision, and complex geometries, modular direct workpiece clamping system consists of VERO-S WDB base modules for machine table, VERO-S WDN clamping modules, and freely combinable VERO-S WDS stacking modules. Standard heights of latter are 30 and 50 mm to allow fine graduations of 10 mm in height of clamping columns....

Read More »
Fluid Disconnects

M3 Dry Break Quick Disconnects reduce downtime, eliminate leaks.

Manufactured in corrosion-resistant 303 stainless steel and manufactured with M3 thread, QDM3I and QDM3E enable fluid power lines to be switched while maintainingÂ- leak-free environment in product design or testing facility. Minimized dead volume maximizes sealing capabilities, and both sides of quick disconnect, internal and external, are fully shut-off prior to disconnection. In

Read More »
Mechanical Connectors feature anti-turn design.
Mechanical Wire, Cable and Rope

Mechanical Connectors feature anti-turn design.

With anti-rotation feature, Type ATTA and ATAU Connectors minimize risk of movement at installation. Connectors are manufactured from high strength aluminum alloy and are suitable for use with copper or aluminum conductor. Units feature chamfered wire entry that facilitates conductor insertion. UL Listed and CSA Certified, connectors are available in 1- or 2-wire port design with various hex size...

Read More »
Weld-On Plate enhances John Deere 500 Series loader functionality.
Steel

Weld-On Plate enhances John Deere 500 Series loader functionality.

Measuring 49.38 x 22.85 in., John Deere 500 Series Weld-on Plate is formed from 5/16” steel, designed to be welded to existing attachments, and interfaces with John Deere 500 Series loaders that use JD attaching system. Features, including steel cast upper hooks and welded locking pins spaced to OEM specifications, ensure proper fit when welded to buckets or attachments.  

Read More »
Cabin Doors on the Airbus A350 are Lifting off with a Primary Structural Component Made from Victrex® Peek Polymer
Brackets

Cabin Doors on the Airbus A350 are Lifting off with a Primary Structural Component Made from Victrex® Peek Polymer

WEST CONSHOHOCKEN, PA USAÂ- – Airbus Helicopters is replacing aluminum in a fitting in the aircraft door of the Airbus A350-900 with a high-modulus, carbon fiber-reinforced high performance polymer. The brackets, now manufactured from VICTREX® PEEK 90HMF40, has been developed by Airbus Helicopters and is in serial production for commercial use after receiving the relevant component...

Read More »
SB Tactical Introduces New Product Lines
Pistols

SB Tactical Introduces New Product Lines

Company launches new website and online sales store. SAINT PETERSBURG, Fla.Â- – SB Tactical™, the inventor and manufacturer of the Stabilizing Brace™, is pleased to announce the immediate release of new products for multiple firearms platforms. The new website and online store, accessible at www.sb-tactical.com, will allow customers to purchase product directly from SB Tactical™....

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers