New Tuohy Borst Adapters Feature Leak-Proof Silicone Gasket
Tuohy Borst Adapters come with female luer lock, tubing connection sideports, barbed and threaded ends and red and blue caps. Units are engineered to prevent backflow of fluid and are suitable for applications requiring large instruments and devices. The adapters feature tinted polycarbonate body and can be customized into specific device design.
Read More »
GA-ASI and Pratt & Whitney Team Demonstrate Successful MQ-25 Engine Test
SAN DIEGO – 31 May 2018 – The Pratt & Whitney (P&W) PW815 engine was selected by General Atomics Aeronautical Systems, Inc. (GA-ASI) to power their proposed solution for the U.S. Navy’s MQ-25 Stingray unmanned aerial refueling aircraft. On April 5th, the GA-ASI/P&W team completed its first powered run of the PW815 with the GA-ASI MQ-25A inlet and exhaust configuration. The test met all...
Read More »
GA-ASI and Pratt & Whitney Team Demonstrate Successful MQ-25 Engine Test
SAN DIEGO – 31 May 2018 – The Pratt & Whitney (P&W) PW815 engine was selected by General Atomics Aeronautical Systems, Inc. (GA-ASI) to power their proposed solution for the U.S. Navy’s MQ-25 Stingray unmanned aerial refueling aircraft. On April 5th, the GA-ASI/P&W team completed its first powered run of the PW815 with the GA-ASI MQ-25A inlet and exhaust configuration. The test met all...
Read More »
New Adapters from Worksaver Offer Maximum Capacity of 3,500 lbs
Worksaver’s Adapters are designed for TA-20 series or TA-40 series loaders and allow the use of skid steer type attachments. TA-20 series can be interfaced with Snap-Attach quick coupler on loaders with center-to-center arm distance of 39 in. whereas the TA-40 series adapter come with loader arm distance of 45.5 in.
Read More »
The Future of Electric Motors in the Automobile Industry
This eBook discusses the future of electric parts in the automobile industry and some of the challenges associated with them, while offering expert solutions.
Read More »
New Adapters from Worksaver Offer Maximum Capacity of 3,500 lbs
Worksaver’s Adapters are designed for TA-20 series or TA-40 series loaders and allow the use of skid steer type attachments. TA-20 series can be interfaced with Snap-Attach quick coupler on loaders with center-to-center arm distance of 39 in. whereas the TA-40 series adapter come with loader arm distance of 45.5 in.
Read More »
Danfoss Power Solutions Obtains UL Certification for its PVE-EX Electrohydraulic Actuator
The Danfoss PVE-EX series of electrohydraulic valve actuators is now rated for Class 1 Zone 1, and Class 1 Div 2 hazardous zone environments suitable for oil and gas applications Danfoss Power Solutions has secured UL certification for both the United States and Canada for its explosion-proof PVE-EX electrohydraulic actuator, used with its PVG valve family. The PVE-EX is now approved and...
Read More »
Danfoss Power Solutions Obtains UL Certification for its PVE-EX Electrohydraulic Actuator
The Danfoss PVE-EX series of electrohydraulic valve actuators is now rated for Class 1 Zone 1, and Class 1 Div 2 hazardous zone environments suitable for oil and gas applications Danfoss Power Solutions has secured UL certification for both the United States and Canada for its explosion-proof PVE-EX electrohydraulic actuator, used with its PVG valve family. The PVE-EX is now approved and...
Read More »
New 30ECT EC Brushless Motors Feature Patented Ultra Coil Technology
Portescap’s 30ECT EC Brushless Motors are available in 30ECT64 and the 30ECT90 lengths with peak torque of up to 1.3 Nm and 2.4 Nm respectively. Units come with laser welded front flange, hall sensors and six coils for matching speed and voltage requirements. Motor’s patented high-speed rotor design allows speeds up to 30,000 rpm. Units are suitable for applications such as electric grippers,...
Read More »
New 30ECT EC Brushless Motors Feature Patented Ultra Coil Technology
Portescap’s 30ECT EC Brushless Motors are available in 30ECT64 and the 30ECT90 lengths with peak torque of up to 1.3 Nm and 2.4 Nm respectively. Units come with laser welded front flange, hall sensors and six coils for matching speed and voltage requirements. Motor’s patented high-speed rotor design allows speeds up to 30,000 rpm. Units are suitable for applications such as electric grippers,...
Read More »
New AU200-50x50-SC Alignment Stage Features Precision Pattern of Drilled and Threaded Mounting Holes
AU200-50x50-SC Alignment Stage with high resolution and high repeatability is suitable for alignment, assembly, laser drilling, machining, medical, scanning, and optical applications. Unit provides a linear travel of 50 x 50 mm (X and Y axes) with a resolution of 5 microns for each axis. The stage comes with 1 mm per-turn lead screws and preloaded V-groove and crossed roller bearings. Unit is...
Read More »
Do You Have Unique Lifting Needs?
EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.
Read More »
