New AU200-50x50-SC Alignment Stage Features Precision Pattern of Drilled and Threaded Mounting Holes
AU200-50x50-SC Alignment Stage with high resolution and high repeatability is suitable for alignment, assembly, laser drilling, machining, medical, scanning, and optical applications. Unit provides a linear travel of 50 x 50 mm (X and Y axes) with a resolution of 5 microns for each axis. The stage comes with 1 mm per-turn lead screws and preloaded V-groove and crossed roller bearings. Unit is...
Read More »
Moticont's New Addition, LVCM-070-089-03, Features Higher Continuous and Peak Force
Moticont's new compact, linear voice coil motor, LVCM-070-089-03, has a higher continuous force and a higher peak force. It can work as a DC servo motor and performs with high accuracy and repeatability to less than 1 micron when in a closed loop use. This linear motor can be used in different settings such as work holding and clamping, antenna positioning, laser machining and drilling, and...
Read More »
Moticont's New Addition, LVCM-070-089-03, Features Higher Continuous and Peak Force
Moticont's new compact, linear voice coil motor, LVCM-070-089-03, has a higher continuous force and a higher peak force. It can work as a DC servo motor and performs with high accuracy and repeatability to less than 1 micron when in a closed loop use. This linear motor can be used in different settings such as work holding and clamping, antenna positioning, laser machining and drilling, and...
Read More »
New Heavy Duty PTOS Are Nearly Maintenance Free
Twin Disk’s new RC 211 and RC 311 are designed for low maintenance in severe applications. Including main bearings that have been lubricated for long life and hydraulic actuation, the PTOs can be used for both side load and in-line applications. The products have organic friction plates, but sintered iron plates are optional. The RC 211 has a torque rating of 909 lb-ft, and the RC 311 has a...
Read More »
Tips for Managing Dangerous Dust in Manufacturing Facilities
This eBook covers important considerations when creating a dust management plan for your facility. For more information, download now.
Read More »
New Heavy Duty PTOS Are Nearly Maintenance Free
Twin Disk’s new RC 211 and RC 311 are designed for low maintenance in severe applications. Including main bearings that have been lubricated for long life and hydraulic actuation, the PTOs can be used for both side load and in-line applications. The products have organic friction plates, but sintered iron plates are optional. The RC 211 has a torque rating of 909 lb-ft, and the RC 311 has a...
Read More »
Johnson's New Illustra® IntelliZip Compression Engine Uses Intelligent Bitrate Control
Johnson’s Illustra® IntelliZip Compression Engine is designed for reducing bandwidth and storage needed by surveillance system. Intelligent Bitrate Control is used for adjusting compression level during video streaming of cameras to VideoEdge® network video recorders. IntelliZip adjusts the encoder configuration based on the rate control for optimum bitrate and seamlessly reconfigure to...
Read More »
Johnsonâ™s New Illustra-® IntelliZip Compression Engine Uses Intelligent Bitrate Control
Johnson’s Illustra® IntelliZip Compression Engine is designed for reducing bandwidth and storage needed by surveillance system. Intelligent Bitrate Control is used for adjusting compression level during video streaming of cameras to VideoEdge® network video recorders. IntelliZip adjusts the encoder configuration based on the rate control for optimum bitrate and seamlessly reconfigure to...
Read More »
Siemens' Latest Synchronous-Reluctance Motors are Now Available in Two New Height Shafts
Siemens’ Synchronous-Reluctance Motors consist is offered with AH90 and AH225 height shafts. The motors are available in power ranging from 0.55 to 45 kW and are rated with speeds of 1500 and 3000 revolutions per minute. The units come with data matrix code and are suitable for manufacturers of pumps, fans, compressors and machine builders.
Read More »
Siemensâ™ Latest Synchronous-Reluctance Motors are Now Available in Two New Height Shafts
Siemens’ Synchronous-Reluctance Motors consist is offered with AH90 and AH225 height shafts. The motors are available in power ranging from 0.55 to 45 kW and are rated with speeds of 1500 and 3000 revolutions per minute. The units come with data matrix code and are suitable for manufacturers of pumps, fans, compressors and machine builders.
Read More »
Ellwood Texas Forge Navasota LLC Launches Marine Product Line for Seakeeper Gyro Stabilizers
HOUSTON (PRWEB) APRIL 23, 2018 The Ellwood Closed Die Group launches a new marine product line for Seakeeper. The product line includes several finish machined flywheels that are assembled into the gyro stabilizers, which per Seakeeper cuts down “95% of all boat roll, the rocking motion that causes sea sickness, anxiety and fatigue”. From start to finish, Ellwood Texas Forge Navasota (ETFN)...
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
