New Mechanical Power Transmission Products

Intelligent Brushless Motors provide distributed control.

Based on MotionChip(TM) DSP Control Technology, IM23x motors provide motion control solutions for pulse and direction; stand-alone, pre-stored sequences; and multi-axis applications. Motor, power electronics, controller, position sensor, and interface are integrated into one 104-144 x 57 x 57 mm unit with local digital and analog I/O signals. Offered in 3 lengths, motors produce 0.1-0.3 Nm...

Gear Motor runs from any 12 V DC source.

Model MMP.TM55-12V.GPK52-029.1 is rated for 2.9 Nm continuous torque at 160 rpm, with 9 Nm peak. Measuring 2.14 in. dia x 7.25 in. long, servo motor features keyed output shaft with 12 mm dia and 25 mm length. Mounting is accomplished with 4 face mount M5 threaded holes, and available options include integral optical encoders, failsafe brakes, analog tachometers, and planetary gear heads.

Annunciators can monitor up to 100 doors or zones.

Suited for complex access control applications, Series 7600 Annunciators constantly display status of each zone with tri-state LEDs that report 6 door conditions. Modular system, expandable in 4 and 8 zone increments, lets users remotely unlock doors from console or perform authorized entry and egress operations via access control system or REX device. Unauthorized exit attempts, tampering, and...

Replacement Parts are produced for obsolete connectors.

Providing functional equivalents for obsolete RF coaxial connectors and adapters, replacements come in brass, stainless steel, and aluminum body materials with brass, beryllium copper, of phosphor bronze contacts. Styles include SMA, SMB, SMC, MCX, and other miniature series interfaces as well as larger interfaces such as BNC, TNC, N, C, SC, HN, LT, and LC. Bodies are produced in straight,...

How To Engineer Precision Miniature Components

This white paper provides an overview into engineering precision miniature components. Design considerations for miniature metal parts include size, shape, and material, precision and finishing.

Pin Locating Clamp features fully enclosed design.

Pneumatically powered actuator, Series PLC locates, clamps, and supports parts in weld areas. Fully enclosed design provides protection against weld slag and other contaminants, while built-in locking mechanism locks pin in any position to secure parts if air pressure is lost or removed. Available in 2 sizes with 5 pin size choices and 2 pin styles, Series PLC provides 12.5 mm max clamping...

Knuckle Chains are suited for case and tote conveyors.

Suited for heavy-duty transport, C3200 straight-running and C3210 radius Knuckle Chains are molded in Polyoxymethylene (acetal) or Polyamide (nylon), which withstands temperatures to 266Ã-

Brush DC Motors feature 7-slot skewed armatures.

PittmanÃ-® Series 8000 brush-commutated DC motors minimize magnetic cogging at low speeds, which allows smooth and quiet operation. Motors are available in 3 lengths: 2.070, 2.445, and 2.915 in. They can achieve peak torques up to 16.8 oz-in. and speeds up to 10,650 rpm for standard motors at rated voltages. Windings are resin-impregnated for greater reliability. Applications include data...

Non-Captive Linear Actuator occupies 0.8 in. space.

Suited for linear motion applications, Size 8 hybrid linear actuator features engineering thermoplastics in rotor drive nut and stainless steel Acme lead screw for quiet and maintenance-free operation. It is available in resolutions from 0.0015-0.04 mm per step and delivers thrusts of up to 10 lb. Design is suited for linear travel requirements and applications where lead screw is secured at both...

Fluid Power Pressure Switch offers 100 million cycles.

Herion 33D series is available in electromechanical and electronic variants that can be utilized in pneumatic and hydraulic environments. Switching status is indicated by backlit, real-time LED display. With features such as programmable delays, tamper protection, and all stainless steel wetted parts, pneumatic and hydraulic/Allfluid models are rated for 0.5-232 psi and 0-9,000 psi operating...

DC Gearmotor accepts any 24 Vdc source.

Measuring 2.14 in. dia x 7.25 in. long, Model MMP.TM55-24V.GPK52-029.1 has keyed output shaft of 12 mm dia by 25 mm long. Mounting is accomplished with 4 face-mount M5 threaded holes, equally spaced on 40 mm dia BC. Output is rated for 2.9 Nm continuous torque at 160 rpm and 9 Nm peak. Motor requires 3.0 A at 24 Vdc to generate full load output torque. Options include optical encoders, failsafe...

Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions

Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.