Palm Nailer Kit offers 4 interchangeable nose tips.

Palm Nailer Kit offers 4 interchangeable nose tips.

Model PN650 6 1/2 in. nailer kit includes non-marring finish tip for finish nails up to 3d, magnetic tip for common nails between 3d and 16d, standard tip for common nails up to 70d, and steel hammer tip for moldings and dowels. Multi-bow action provides 2,300 bpm at 100 psi. Once nail reaches desired depth, fluctuating piston disengages to stop driving nail. Kit includes padded glove for added...

Read More »
Nailers drive finish nails up to 2 1/2 in. long.

Nailers drive finish nails up to 2 1/2 in. long.

Model FN250B uses 16 ga finish nails between 3/4 and 2 1/2 in., while Model DA250B fires standard 15 ga angled finish nails between 1 and 2 1/2 in. long. Both include internal piston catching mechanism, tool-free adjustable depth control with over 45 pre-set detents, tool-free 360Â-

Read More »
Pin Nailer suits detailed woodworking applications.

Pin Nailer suits detailed woodworking applications.

Model PIN100, 23-gauge pin nailer employs magazine that automatically adjusts to different fastener lengths for loading and operation with less downtime. Compatible with SencoÂ-® and Accuset models, it accepts pin nails from 1/2 to 1 in. long. Its bottom load magazine has 170 count capacity, and unit features visual reload indicator. Able to countersink 1 in. pin nails into oak, PIN100...

Read More »
Multi Terrain Loader suits construction and landscaping.

Multi Terrain Loader suits construction and landscaping.

Multi Terrain Loader series includes models 247 and 257 rubber-tracked machines. Series offers suspended undercarriage that allows operation over various terrain conditions. Series works productively on sensitive surfaces without causing damage. Model 247 has operating capacity of 1,354 lbs, operating weight of 6,665 lbs, and ground pressure of 3.8 psi. Model 257 has 1,614 lb operating capacity,...

Read More »
Fastening System drives fasteners in concrete, steel, or block.

Fastening System drives fasteners in concrete, steel, or block.

DX 351 Powder Actuated Fastening System allows total mobility without cords. Baseplate makes it suitable for driving fasteners in narrow, almost inaccessible places such as strut channels or junction boxes when being secured to concrete slabs or steel. With optional pole tool accessory, user can fasten into ceilings up to 13 ft high. DX 351 can be quickly converted into fully automatic,...

Read More »
Conveyor Skirtboard automatically adjusts to keep seal.

Conveyor Skirtboard automatically adjusts to keep seal.

BOCO(TM) Automatic Skirting keeps material on conveyor belt and prevents loading zone spillage. Skirting floats on belt, maintaining seal without maintenance. Supported on pressure arms between 2 steel plates, system's rubber sealing strip rises and falls with fluctuations in belt travel. When worn, replacement of sealing strip is no-tool operation, as rubber is held in place with linchpins.

Read More »
Rotary Hammers perform three different functions.

Rotary Hammers perform three different functions.

UHE 22 and UHE 28 Multi Hammers allow users to switch from drilling, percussion drilling, or no-rotation hammer operations. Applications include drilling hole in steel or wood, drilling anchor holes in concrete or brick, or chiseling concrete or brick. Two speed gearbox provides 0-1050 or 0-2900 rpm no-load speed on UHE 22, and 0-950 or 0-2600 on UHE 28. Both tools have electronic controls,...

Read More »
Rodless Cylinder moves at high speeds.

Rodless Cylinder moves at high speeds.

Pneumatic RexMover(TM) moves at speeds up to 16 fps, with virtually leak-free operation. It has aluminum construction, cushions, impact bumpers, and grooves for sensors on 3 sides. Oval-shaped piston resists side loads. User has choice of 3 air connections: on side at both ends, on rear of end covers, or on one end cover. Other options include NPT or ISO-G (BSPP) ports, and choice of internal...

Read More »
Tube Connectors suit high-flow applications.

Tube Connectors suit high-flow applications.

Barbed tube-to-tube connectors are designed for use with 3/8 and 1/2 in. ID flexible tubing. Tee, Elbow, and Straight Through configurations are available. Components are molded in lot traceable, virgin, medical-grade polycarbonate and have no parting line on critical sealing surfaces.

Read More »
Aluminum Connectors suit freestanding wall applications.

Aluminum Connectors suit freestanding wall applications.

Aluminum Connectors, used on CornerForms(TM) panel connector system, feature formed channels that nest metal standards. They include Corner Posts and Three Way Posts that accept 3/4 in. predrilled countersunk holes. Connectors come in 96 in. lengths. Additional aluminum profiles include tubes, bullnose profiles, channel moldings, poster frame and display stand components, and 90 and 180 deg posts.

Read More »

All Topics