Form Systems and Wall Panel offer sanitary surfaces.
Suitable for sanitizing on daily basis, added products include EFS-8 Extrutech Form System for 8, 10, and 12 in.- concrete walls; EFSI-8 Extrutech Form System for Insulated concrete walls; P224 Wall Panel for interior partition walls and clean rooms; and P645 Angle Form Connector for construction of concrete circular and oval storage tanks or above/below ground swimming pools. Waterproof...
Read More »
Concrete Plastic Wall Forms feature stay-in-place design.
Measuring 24 in. wide x 6 in. thick, Extrutech FORM System snaps together with double-spline, E-Locking System. Forms can be insulated with 2 in. of foam board for R-14, and brick or stone masonry may be added to exterior to optimize building appearance. Featuring high gloss, non-porous surface that resists damage,- waterproof concrete forms will never rust, rot, corrode, or discolor and are...
Read More »
Stay-in-Place Concrete Form creates 6 in. poured walls.
Offering easy-to-clean sanitary surface on both sides, FORM System creates structural wall system that is builder and customer friendly, and is suited for use in dairy, car wash, and food facilities. System consists of 24 x 6 in. panel that is pre-cut to project specifications and snaps together with double-spline E-Locking System.
Read More »
Molded Fiber Glass CP Recently Manufactured Pan Forms for a Leading Illinios University
Independence, KS- – Molded Fiber Glass Construction Products (MFG CP) recently completed a pan form job for the University of Chicago in Illinois. The University began construction September 2011 for the William Eckhardt Research building. The new research building will house the universities engineering and science divisions when complete in February 2015. The 265,000 square foot building has...
Read More »
How to Reduce Costs for Plastic Caps, Closures and Other Packaging Products
Check out this white paper to read about the six questions to consider before selecting an injection molder for your packaging application.
Read More »
Molded Fiber Glass CP Awarded Special Custom Construction Project on Police Headquarters in Kansas City Missouri
Independence, Kansas – Molded Fiber Glass Construction Products (MFG CP) of Independence, KS provided custom forms for the downtown Kansas City Missouri Police Headquarters’ recent renovations. MFG CP molded 529 triangle fiber glass waffle forms that were engineered to create the architectural cast in place concrete ceiling in their community room. The custom forms were two depth sizes: 38”...
Read More »Molded Fiber Glass CP Starts Production on a New Round Form
Independence, KS- Molded Fiber Glass Construction Products (MFG CP), has begun production on a new round column form. The column forms will be sold for non-architectural uses such as light posts, parking lot lights, pipe lines and transmission lines. The advantages to the lower cost fiberglass base forms are you get multiple pours out of them, versus other single use forms. Additional advantages...
Read More »Molded Fiber Glass CP Provides Special Custom Forms to Be Used at the University of Albany's Newest Building
Independence, KS - Molded Fiber Glass Construction Products (MFG CP) was chosen to provide fiberglass concrete forms that created the fab level for the College of Nanoscale Science and Engineering (CNSE) of the University of Albany. The new building totals 280,000 square feet, and features a 50,000 square foot clean room, at the center of the building. The new facility, NanoFab Xtension will...
Read More »
SABIC Helps Meccano de Mexico Break New Ground with First Concrete Forms Featuring Lightweight, High-performance LNP* Verton* Composite
MEXICO CITY, - Here at Plastimagen Mexico 2011, Booth 2216, SABIC's Innovative Plastics business unit today announced an industry first: new one-piece, reusable concrete forms made from the company's high-performance LNP* Verton* long glass fiber-reinforced composite. The new corrosion-resistant composite forms were developed by SABIC and Meccano de Mexico, a top Mexican construction supply...
Read More »Concrete Void Forms are environmentally sustainable.
Utilized in construction of cast-in-place concrete where expansive soils are present, Sonovoid-® concrete void form provides temporary support for cast-in-place floors, beams, and walls until concrete can support itself on drilled piles or caissons. Environmentally sustainable product is made entirely of fiber-based corrugated paper and finished with thin wax coating, making it water-resistant,...
Read More »Jump Start High-Rise Construction With the Space-Lift(TM) System from Symons
The Space-Lift(TM) System is a fully-engineered jump form intended for concrete shear wall applications. The system consists of frame components and a carriage assembly that supports the forming equipment and crew. The Space-Lift assembly is suspended from Jump Shoes that are bolted to inserts in the concrete wall. The entire assembly remains anchored to the wall during forming operations. Work...
Read More »
What Can Test Devices Spin for You?
Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.
Read More »
