Connectors and Adapters feature corrosion-resistant tri-metal finish.
Made with silver-plated center contacts, 4.3-10 Connectors and Adapters offer 6 GHz maximum operating frequency and VSWR as low as 1.08:1. Featuring low coupling torque and PIM performance of -166 dBc, units are suitable in applications such as cable assemblies, feeder cables, base stations and DAS. Products meet IP67 standards when mated.
Read More »
4.3-10 Connectors and Adapters meet IEC 61169-54 standards.
Suitable in custom cable assemblies, feeder cables, mobile communications systems, base stations and small cells application, 4.3-10 Connectors and Adapters feature silver-plated center contacts and corrosion-resistant tri-metal finish on body and outer conductor. Designed with low coupling torque and PIM performance of -166 dBc, units are protected from dust and moisture when connected.
Read More »
CP-1501 Compactor delivers 39,500 lb maximum force.
Suitable in business offices, retail outlets, hotels and universities, CP-1501 Commercial Compactor with single cylinder design is serviceable by front/rear load trucks. Featuring 45.6 x 46 in. top opening, and capacity of 1-1/2 cu-yd, unit provides cycle time of 50 sec. Having 90 cu-yd/hr volume displacement, compactors meet ANSI and OSHA standards.
Read More »
PT-3000 Puller/Tensioner comes with curbside motor mounted frame.
Equipped with dual purpose levelwind, reels and rope, PT-3000 Puller/Tensioner has capacity of pulling up to 3,000 lb overhead and up to 7,500 lb underground. Available in single and dual tire configurations suitable for cramped work areas and wet working conditions respectively, product comes with built in underground sheaves. PT-3000 features pad mount transformer attachment for handling tough...
Read More »
Checklist: How to Get the Right Belt the First Time
This guide is intended to help identify and address application criteria necessary to specify the right belt to deliver a highly efficient, reliable product.
Read More »
Dril-Quip Wins Two Spotlight On New Technology Awards For Wellhead System And Connector
HOUSTON, May 2, 2017 - Dril-Quip, Inc. (NYSE: DRQ) was presented with two Spotlight on New Technology Awards at the 2017 Offshore Technology Conference (OTC) in Houston on May 1, 2017 for its BigBore-IIe™ Wellhead System and its DXe™ Wellhead Connector. The Spotlight on New Technology Awards showcase new and advanced technologies that are leading the industry into the future. The BigBore-IIe...
Read More »
Ceramic-Look Floral Bucket features plastic construction.
Available in Patina Green Gloss and Red Gloss finishing, Ceramic-Look Floral Bucket are available in 11-1/4 in. diameter x 9-1/2 in. H and 12-1/2 in. diameter x 11-3/4 in. H sizes. Pots are made of fine ceramic with break-resistance of plastic.
Read More »
CDM Electronics Now Stocks the Latest Generation of Eaton's Micro-Military Circular Connectors
Ruggedized Connectors Deliver Unparalleled Performance in Mission-Critical Military and Aerospace Applications Turnersville, NJ, April 26, 2017 - Announced today by CDM Electronics, a premier authorized distributor of electronic connectors and cables, is the availability of the latest generation of Eaton's Micro-Military Circular Connector Series with shell diameters as small as 0.43” (11...
Read More »
Bridgeport Fittings' AMC50-QI EZ-Lock™ Takes Half the Time to Install, with no Tools Required
STRATFORD, Conn. (April 27, 2017) – Bridgeport Fitting’s AMC50-QI EZ-Lock connector makes fast, secure connections employing the industry’s only double-snap type AMC connector. Contractors simply snap the connector onto the cable, squeeze the lever and set into the knockout. The lever action also allows for easy, quick removal. No tools are required with the AMC50-QI connector and the...
Read More »
MIXO Modular Inserts are resistant to mechanical stresses.
Available with types of connections ranging from small signal connectors with low amp and voltage, up to 200 amp connectors, MIXO Modular Inserts are mounted side by side and locked into metallic frame. Each insert is designed to fit and lock into frame sizes ranging from 1 module to 12 modules. Housing signal, power, data and pneumatics contacts for conduction with up to 8 bars pressure...
Read More »
MS3 Inserts come with HiPIMS PVD coating.
Suitable for machining unstable or thin-walled components and setups, MS3 Inserts are equipped with coolant jet guiding geometry. Featuring smooth surface and extremely sharp cutting edges, MS3 inserts are used for cutting high temperature alloys, titanium, cobalt-based and nickel-based alloys. Units are combined with WSM01 grade and secondary applications include steel, stainless steel and...
Read More »
ISO-Certified Plastic Injection Molding from Rodon
The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.
Read More »