Bags

SCS Introduces Bags and Film qualified to MIL-PRF-81705E Type III, Class 2

January 16, 2017 - SCS now manufactures a series of bags and film which are qualified to MIL-PRF-81705E Type III, Class 2. These products are on the Qualified Product Listing under the Defense Standardization Program. This product features the same quality standards and level of service you have come to trust and depend upon from SCS. Standard stock bags are converted per MIL-DT L-117H unless...

Read More »
Xuron TK2600 Bead Stringer's Tool Kit features glare-eliminating black finish.
Tool Kits

Xuron TK2600 Bead Stringer's Tool Kit features glare-eliminating black finish.

Used for cutting, crimping, forming and handling bead wire, Bead Stringer’s Tool Kit includes Model 410 Micro-Shear Flush Cutter, model 450 TweezerNose Pliers and model 494 4-in-1 Bead Crimper. Flush cutter cuts soft wire up to 18 AWG and Bead Crimper has 3 folding stations for 1mm, 2mm and 3mm crimp tubes. Product is offered in tri-fold protective pouch and features non-slip, carbon steel...

Read More »
Anglissimo Elbow Plug Connectors prevent cable clutter.
Connectors

Anglissimo Elbow Plug Connectors prevent cable clutter.

Available in 3 sizes 0B, 1B and 2B series, Anglissimo Elbow Plug Connectors are suitable for medical, industrial control, test and measurement, audio-video and telecommunications. Offering possibility to orientate connector in possible positions, units consist of 2 to 32 electrical contacts and prevent cluttering of cables.

Read More »
Enerjoy Radiant Acoustic Panels are maintenance-free.
Miscellaneous Panels

Enerjoy Radiant Acoustic Panels are maintenance-free.

Available in 2 x 2 ft. or 2 x 4 ft. sizes, Enerjoy Radiant Acoustic Panels enable optimization of IAQ air change with humidification, dehumidification or cooling as required. Dampening and absorbing sound, panels eliminate need for temperature stratification. Avoiding noise, dust, odor and germs or contaminants, units are ceiling mounted that makes floor space is fully optimized and deliver...

Read More »
Multicyl - The Power Source for Modular Tooling
Presses

Multicyl - The Power Source for Modular Tooling

Multicyl is the best power source in the Industry for unitized or modular tooling such as Unipunch. Simple, cost effective, and requiring only air to operate, Multicyl cylinders have been powering Unipunch hole punching stations for over 30 years. Recently we have expanded our capabilities and at Multicyl we have a full working knowledge of the Unipunch catalogue and now have power solutions for...

Read More »
iProAudio Balun™
Baluns

iProAudio Balun™

The possibilities are limited only by your imagination... Needed: Imagination, Smartphone, Cat5e cable, microphone and iProAudio balun ETS has applied its Balanced Line technology to the iProAudio Balun™ mating a professional- grade XLR-style connector with a 3.5mm TRRS plug that plugs into the smartphone or iPad's audio input jack, allowing software on the smartphone to record professional...

Read More »
PC650LC-11 Hydraulic Excavator offers auto idle shutdown function.
Excavators

PC650LC-11 Hydraulic Excavator offers auto idle shutdown function.

With operating weight between 63710 and 65900 kgs, PC650LC-11 Hydraulic Excavator is equipped with 436 horsepower Komatsu SAA6D140E-7 EPA certified engine. Having 16.4 gallon refill capacity DEF tank, unit provides 2:1 diesel-to-DEF refill ratio. Including 12-volt power ports incorporated into ISO certified cab, unit send alerts of fuel levels, DEF levels and operating hours. Featuring Komatsu...

Read More »
SI Threaded Aluminum Insert features micro fastener technology
Inserts

SI Threaded Aluminum Insert features micro fastener technology

Suitable for electronics, medical, automotive, aerospace and transportation, SI Threaded Aluminum Inserts provide durable and reusable metal threads in plastics to accept mating hardware. With molded-in type installation during molding process, unit offers press-in type installation by pressing insert into drilled hole. Including ultrasonic / heat staking inserts for installation ultrasonically...

Read More »
TriGrip's Carbide Gripper Inserts and TriMax's Vises designed in G, C, M and T variations.
Vises

TriGrip's Carbide Gripper Inserts and TriMax's Vises designed in G, C, M and T variations.

Preventing use of dovetailing workpieces and vibration dampening, Carbide Gripper Inserts makes holding secure at low clamping forces. At 3.5mm of clamp surface and 0.14 in. clamping, triangular gripper has 2 rows of teeth at different angles with 5° taper. Allowing multiple part clamping, quick change components and easy adjustments, Vises can hold workpieces up to 7.87 in. length and deliver...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers