Adhesives

Soft Silicone Adhesives suit skin applications.

Designed specifically for wound care, Silbione® HC2 2022 medium-viscosity silicone gel is compatible with most coating processes and applicable on wide range of substrates, including PU films, perforated films, and open knit fabrics. Product is manufactured in ISO 8 clean room in ISO 13485 facility to ensure microbial safety on breached skin. For wearable devices, scar management, and...

Read More »
Sealants

WACKER and Inpro Develop a New Silicone Adhesive for Plastic Oil Pans

Munich — Munich-based chemical Group WACKER, and inpro Innovationsgesellschaft fÃ-¼r fortgeschrittene Produktionssysteme in der Fahrzeugindustrie mbH have developed a silicone adhesive-sealant for mounting vehicle oil pans. Sold under the name ELASTOSIL® RT 779, the new product adheres to both aluminum and polyamide. Plastic oil pans can now be mounted without mechanical fasteners....

Read More »
Resins

Acrylic Resins suit ultra-low VOC coatings.

Suited for 2-component concrete coatings, MAINCOTE™ AEH Acrylic Epoxy Hybrid combines weatherability and UV resistance of acrylics with chemical resistance of epoxies. Product offers tire pickup resistance in waterborne 2K concrete coatings as well as resistance to aggressive cleaning regimens. With VOC levels of 50 g/L or less, MAINCOTE™ 4950 Acrylic Resin is suited for direct-to-metal...

Read More »
Resins

Concrete Benefits: Polyaspartic Coating Resin from Bayer Offers Advantages for Construction Projects, Corrosion Protection

LAS VEGASÂ- — At construction sites, it is important to keep downtime and costs to a minimum. Bayer MaterialScience helps the industry save time and money by offering innovative polyaspartic coating resin raw materials to coatings manufacturers, empowering them to deliver cutting edge coatings products. Bayer will highlight its Desmophen® NH 2850 XP polyaspartic binder and a number...

Read More »
Fast Cure Adhesives suit cartridge dispensing.
Epoxies

Fast Cure Adhesives suit cartridge dispensing.

Suitable for use with TriggerBond® dispensing guns, TriggerBond EpoxiesÂ- offer shear strength up to 1,500 psi and notched Izod impact of 2.7 ft-lb/in. Adhesive's 2 components are packaged into cartridges, which fit in dual-barrel dispensing gun. Because cartridges contain precise quantities of hardener and resin, TriggerBond produces correct mix ratio every time user squeezes...

Read More »
Moisture-Cure Pourable Sealant requires no mixing.
Sealants

Moisture-Cure Pourable Sealant requires no mixing.

Designed for use with M-Curb™ Pitch-Pan System in built-up and modified bitumen roof systems, M-Thane™ One-Part Pourable Sealant can be applied in damp and cold as well as dry climates. Polyether sealant is solvent-free with less than 25 g/l VOC and does not outgas or bubble up on damp surfaces. Made up of 100% solids, self-leveling product will not shrink and can be applied at temperatures...

Read More »
RTP Company to Exhibit at NPE 2015, Offering Tribology Data and Low Emission Thermoplastics
Plastics

RTP Company to Exhibit at NPE 2015, Offering Tribology Data and Low Emission Thermoplastics

WINONA, MINNESOTA, USAÂ- – RTP Company, a leading global compounder of custom engineered thermoplastics, is exhibiting at NPE 2015: International Plastics Showcase from March 23- 27 at the Orlando Conference Center in Orlando, Florida. Located in Booth #28080 in the South Hall, RTP Company will feature an assortment of successful applications created from its engineered thermoplastics....

Read More »
UV-Cured Epoxy Adhesive increases electronic assembly reliability.
Epoxies

UV-Cured Epoxy Adhesive increases electronic assembly reliability.

Developed to pass reliability requirements in disk drive, camera module, photonics, and circuit assembly applications, 535-11M-3 eliminates crowning (warpage) of sliders in Head Gimbal Assemblies. This non-conductive, low-outgassing, flexible adhesive does not contain antimony and can be used in other bonding applications in Head Stack Assembly as well as for lens bonding in camera modules, chip...

Read More »
Die-Attach Adhesives offer optimized rheology.
Adhesives

Die-Attach Adhesives offer optimized rheology.

Intended for microelectronics and semiconductor industries, Electraset™ electrically conductive die attach adhesives conform to Test Method 5011 in MIL-STD-883. Electraset™ 620 couples low cure shrinkage with low coefficient of thermal expansion, minimizing chip or device warping and preventing cracking or delamination. Electraset™ 620-2 has virtually no bleed and minimal spreading,...

Read More »
Adhesive Gripping Material helps prevents towel contamination.
Adhesives

Adhesive Gripping Material helps prevents towel contamination.

Featuring water-resistant ShurStep® Non-Skid Abrasive Tape, Get A Grip stopsÂ- drying towels from falling to floor. This household product, comprised of die-cut, non-slip, peel-and-stick solution, applies in seconds to bathroom towel bars, kitchen appliances, and other racks/handles in various areas throughout home. Rubber-based adhesive coating adheres to any smooth, clean, and dry...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers