New Adhesives & Sealants Products

Ceramic-Silicone Sealant handles temperatures to 2,000-

Non-flammable, environmentally safe, single-part, water-dispersed Aremco-Seal(TM) 4030 seals porous ceramics and refractories. Formulated with viscosity of 600-1,200 cps, product is applied by brush, roller, or spray equipment, drying at room temperature in less than 1 hr with full cure in 30-60 min @ 450Ã-

Potting Compound cures quickly in thick applications.

Trigger Cure(TM) compound cures at room temperature to depths of 1 in. or more, and in areas under components where light does not reach. Two-part compound is applied with typical disposable-tip, static mix dispensers. Exposure to long-wave UV light cures product to depth of 1/4 inch in 20 seconds or less; remaining liquid resin gels in 7 to 20 minutes. Full cure is achieved in 24 hours at room...

Medical Adhesive Tape suits direct-skin applications.

BioflexÃ-® Rx733P consists of non-woven cloth coated with medical-grade, acrylic, pressure-sensitive adhesive that carries Device Master File Number with Bureau of Medical Devices. Conformable tape is suitable for TENS, ECG electrode, and bandage applications and removes cleanly without causing skin trauma. Stay-flat, easy-release liner facilitates die cutting.

Adhesive suits medical bonding applications.

Single-component Type 3381 UV-cure adhesive complies with ISO-10993 biocompatibility requirements. It forms flexible bond suitable for applications that must withstand thermal cycling and environmental exposure. Acrylated urethane adhesive bonds dissimilar rigid substrates, making it useful for potting and sealing glass-to-metal joints in medical assembly applications. Adhesive also bonds most...

Must-Ask Questions When Choosing a Foam Control Agent

This eBook discusses foam controlling agents and how to find the right one for your needs.

Epoxy System provides moisture resistance.

With hardness rating of 84 and rated viscosity of 60,000 cps, DIEBOND 4460 resists temperatures to 110Ã-

Copper Tape suits heat sealing units in packaging equipment.

CHEMLAMÃ-® uniform, pinhole-free, hardened film is dimensionally stable and resistant to tears, punctures, abrasion, and wear. With layer of PTFE film over PTFE impregnated fiberglass fabric, tape acts as replaceable non-stick surface and prevents flexible packaging films from melting onto heating element and impeding production. It operates effectively at temperatures from -100 to +500Ã-

Coating/Potting Compound coats structural steel columns.

Ceramacast(TM) 589 2-part, silicon-dioxide based, silicate-bonded, chemically-setting ceramic compound is suitable for applications to 2400Ã-

Cloth Tape suits automotive wire harness applications.

Scapa 250 heat-reflective, aluminum-backed cloth tape is single coated with high temperature silicone adhesive system to withstand extreme temperatures up to 500-°F. It meets Delphi specification ES-M-2283, is non-flammable, and offers high tensile strength. Tape may be torn by hand for easy application.

Structural Adhesives are solvent-free.

PERMABONDÃ-® M1305 and M1315 are 2-part, 1:1 mixable, structural acrylics that bond plastics and metals in any combination with flexibility, toughness, and surface adhesion. They offer resistance to peel, fatigue, and impact loads, and will adhere to most structural thermoplastics, thermoset plastics, FRP, stone, ceramics, steel, and aluminum. M1305 and M1315 can join dissimilar materials,...

Hot-Melt Adhesive dries clear.

VERSA-MELTÃ-® L 34-656A secures wrap-around paper and plastic labels to glass, PVC, and PET bottles of cold water or other non-carbonated, transparent liquids, allowing consumers to see through label and into container. Adhesive may be used with roll-fed and cut-and-stack labelers and is suitable for pick-up and overlap operations. It meets composition requirements of Indirect Food Additives,...

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.