New Adhesives & Sealants Products

Epoxy System suits applications to 400-

Clear, unfilled, Aremco-Bond(TM) 820 provides general purpose bonding of ceramics, glass, plastics, and metals. Flexural and tensile shear strengths are 8,000 and 1,200 psi, respectively. Product mixes in 1:1 ratio, providing viscosity of 12,000 cps and cure time of 45 min at room temperature. Shore-D hardness is 70 and shrinkage is less than .008 in./in. upon curing. Aremco-Bond(TM) 820...

Air Pillows include perforations to facilitate packing.

Usable with AirPouch(TM) Express 3 Void-Fill System, AirPouch Pillows feature EZ-Tear(TM) perforations, which have 1 in. of regular perforation at each side of pillow, with clean cut through center of pillow. Perforations are strong enough to be pulled from bins or overhead hoppers, yet individual pillows can be easily separated for packing. Made of puncture-resistant, DuraClear(TM) material,...

Epoxy Adhesive/Sealant/Coating is chemical-resistant.

Featuring thermal stability, 2-component EP21ARHT-1 is 100% reactive and does not contain any solvents or diluents. It has 2:1 mix ratio by weight and cures at room temperature. Exhibiting minimal shrinkage upon cure, product does not sag or drip on vertical surfaces. Designed to withstand thermal shock and abrasion, it adheres to metals, glass, ceramics, cements, woods, vulcanized rubbers, and...

Temperature Resistant Tape provides burst protection.

Pressure-sensitive, aluminum-backed, glass cloth tape Scapa 290 wraps around high-pressure pipes and connections to act as burst inhibitor. Silicone adhesive resists temperatures up to 500Ã-

The Ultimate Guide to Packaging Automation Solutions

This ebook provides an in-depth guide to packaging automation solutions.

High Temperature Ceramic Adhesive seals tundish nozzles.

Single-part, alumina silica-filled Ceramabond(TM) 813A bonds to ceramic, refractory, and metal substrates. Rated for operating temperatures to 3,000Ã-

UV Curable Epoxy Resin exhibits 2-3% shrinkage upon cure.

Suited for bonding, sealing, and coating, UV16 single-component, epoxy resin based polymer system bonds to plastics, glass, ceramics, and metals. Product is 100% reactive and does not contain any solvents or other volatiles. With operating temperature range of -60 to +300Ã-

Adhesive Foam Tape is suited for direct skin application.

Bioflex Rx1152P is white polyethylene foam, single-coated with rubber-based medical adhesive suited for bandages, monitoring sensors, and personal care items. Adhesive is composed of gelatinous thermoplastic material that conforms like liquid. It is not water-sensitive and will not dry out. Supplied on 60 lb white kraft release liner, tape provides immediate gentle bond to skin and allows...

Stretch Film Sealer retrofits to automatic stretch wrappers.

Able to conform to load surfaces with irregularities up to 2 in. high, product uses surface-seeking sealer head with 8 independent nozzles that individually find load surface and direct 200-230Ã-

Thermal Encapsulant is intended for electronic power devices.

Combined with pre-qualified, turnkey dispensing process, DOW CORNINGÃ-® SE 4451 is designed to meet heat-management needs of electronic power devices. It exhibits thermal conductivity of 3W/mk @ 25Ã-

Compression Sealing System installs seals in 2 sec.

AvsealÃ-® II plugs holes in thin metal components situated in restricted areas. Two-piece structural stem locking mechanism seals holes with diameters ranging from 4-20 mm in steel, iron, and aluminum. Plugs can be placed flush to hole or deep in casting, creating pressure-tight seal with push-out resistance up to 15,000 psi. Applications include engine blocks, cylinder heads, transmission...

ISO-Certified Plastic Injection Molding from Rodon

The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.