New Adhesives & Sealants Products

Adhesive/Applicator suit high-volume production.

Optimized for Polygun AE II Applicator, Jet-melt 3750 features high flow rate and hot tack properties, allowing it to adhere quickly while providing up to 50 sec of bonding range time. Self-contained, 20 oz Polygun AE II offers adhesive flows at 4 lb/hr, warms up in 3 min, and maintains 400Ã-

Semi-Solid Anaerobic Stick Products will not leak or drip.

QuickStix(TM) 534(TM) Hi-Tack Gasket Dressing allows cut gaskets to be positioned and held in place while mating surfaces are aligned for assembly. Product cures at room temperature. Oil resistant QuickStix(TM) 548(TM) Gasket EliminatorÃ-® Flange Sealant prevents fluid or gas leaks on rigid iron, steel, and aluminum flanges. QuickStix(TM) 668(TM) Retaining Compound bonds non-threaded...

Adhesive/Sealant bonds dissimilar substrates.

Cured at room or elevated temperatures, 2-component EP21TDCHT-1 has temperature range serviceability of -100 to +400Ã-

Epoxy Putty protects equipment against impact and abrasion.

Wear Guard(TM) High Impact non-VOC, 100% solids formulation contains flexible acrylate and micro-alumina ceramic beads. Recommended applied thickness is min Ã-¼ in., and on vertical surfaces, putty can be troweled up to Ã-¾ in. thick without sagging. After 7 days it provides 85 Shore D hardness, compressive strength of 7,250 psi, adhesive tensile shear of 2,567 psi, and flexural strength...

Adhesive Tapes for Biopharma Applications

Download our free eBook to learn the various applications NADCO tapes used within the healthcare sector, the many benefits they provide, and how to select the right type.

Transfer Film suits automotive assembly applications.

Low fogging UnifilmÃ-® 619A provides high tack, quick stick and peel strength, as well as humidity and water resistance. Available in thicknesses of 2-5 mils, acrylic adhesive film adheres to urethane foams and low surface energy materials. Film is suited for automotive applications including trim and interior panel bonding, mirror assembly, and foam lamination for gasketing and NVH reduction.

Mounting Adhesive offers thermal and mechanical stability.

Crystalbond(TM) 590 thermoplastic temporary mounting adhesive bonds ceramics, optical components, and semiconductors for dicing and polishing operations. Application is accomplished by preheating mounting plate to 300Ã-

UV-Cure Encapsulants cure within 26-46 sec.

Hysol 3323, 3327, and 3329 are dam-and-fill products for encapsulation of wire-bonded dies used in Smart Card ICs. Used to form dam, high-viscosity Hysol 3323 has thixotropic nature and glass transition temperature (Tg) of 155Ã-

Sealant Caulk reduces sound transmission.

Sound Sealant achieves and maintains specific STC (Sound Transmission Class) value of wall partition systems. Non-flammable, latex-base product is permanently flexible and adheres to wood or metal studs, concrete, gypsum board, AudioSeal Sound Barrier, and other building substrates. Formulation is non-drying, non-hardening, non-staining, and non-migrating. It comes in 29 oz cartridge that covers...

Medical Foam Adhesive suits device/bandage applications.

Bioflex Rx232V-60 is soft white polyethylene foam single-coated with medical grade acrylic pressure-sensitive adhesive that carries Drug Master File Number. Medical-grade product removes cleanly from skin without causing trauma, making it suited for use in medical device assembly or direct skin contact applications such as ECG electrode fabrication and specialty bandage production.

Epoxy Adhesive targets consumer electronics companies.

LoctiteÃ-® 3629 features low temperature cure, making it suited for applications where heat sensitive materials must be bonded prior to wave soldering. Successfully tested in lead-free production environments, surface mount product also meets standards of on-board reliability testing such as SIR testing. Available in syringes and cassettes, uncured adhesive is fluorescent under UV light, and...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.