Adhesives

Low Viscosity, One Part Cyanoacrylate Is Non-Toxic and Meets ISO 10993-5 Specifications

Master Bond MB250NT is widely used for a variety of applications ranging from repair to high speed production for disposable/reusable medical devices and passes ISO 10993-5 testing requirements. It also resists EtO and gamma sterilization processes. This single component ethyl cyanoacrylate cures rapidly depending upon the atmospheric humidity—the higher the level, the faster the rate of cure....

Read More »
Potting Compound encapsulates high-temp resistance heaters.
Encapsulants

Potting Compound encapsulates high-temp resistance heaters.

Consisting of hydraulic-setting, phosphate-bonded, zirconium oxide filled ceramic compound, Ceramacast™ 646N is suitable for encapsulating and potting high temperature electrical components such as resistance heaters, hot gas igniters, thermocouples, and strain gauges used in applications to 3,000°F. Cured material demonstrates shrinkage rate of less than 1%, volume resistivity of 109...

Read More »
Adhesives

Adhesive Solutions target wearable medical devices.

Comprising material, adhesive, conversion, printing, and packaging options, MEDIFIX Solutions™ provides complete turnkey solution for wearable mobile device applications. Combination of Scapa Soft-Pro® Adhesives and Bioflex® Materials with design and assembly techniques allows for customized interface between device and body that performs over time across various activity levels,...

Read More »
HDBaseT Extenders target professional AV system installations.
Extenders

HDBaseT Extenders target professional AV system installations.

UsingÂ- one twisted-pair CAT-X cable, models DVI-7520 and DVI-7525 extend uncompressed HDMI or DVI, embedded audio, bidirectional RS-232 and IR, and Ethernet (DVI-7525 only). These extenders, fully compliant implementation of Power over HDBaseT (POH), support full range of HDBaseT™ features. Supported ranges of operation are up to 130 ft for 4K / 30p and up to 230 ft for 1080p for DVI-7520...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Epoxies

Single-Component, Snap Cure Epoxy exhibits high strength.

Curing in 1–2 min at 300°F, Master Bond EP3SP5FLÂ- has flowable, moderate viscosity and adheres to such substrates as metals, composites, glass, ceramics, rubbers, and plastics. Tensile lap shear strength exceeds 2,000 psi at room temperature when bonding aluminum to aluminum. Also acting as effective electrical insulator, epoxy has -60 to +200°F service range....

Read More »
Sealants

Professional Sealant suits window, door, and siding applications.

FormulatedÂ- to meet contractor requirements regarding flexibility, strength, and durability, QUAD® MAX window, door, and siding sealant withstands effects of such harsh weather conditions as freezing temperatures, intense heat, winds, rain, sleet, snow, and dirt. UV-resistant product, which cures in 24 hr and can be painted within 1 hr, develops strong bond in wet and...

Read More »
Ceramic Adhesives support continuous use to 2,800°F.
Adhesives

Ceramic Adhesives support continuous use to 2,800°F.

Offering chemical and thermal shock resistance, Resbond™ 940 Customizable Series can be matched to physical properties of substrate for optimized adhesion to quartz, cordierite, fused silica, glassware, ceramics, and metals. Products cure in 4-8 hr at room temperature or in 5 min at 175°F. Applications include bonding, sealing, and insulating light bulbs, fixtures,Â- and sensors;...

Read More »
Silicone-Based Material improves semiconductor performance.
Silicone

Silicone-Based Material improves semiconductor performance.

Available as 1.0 mm thick sheet, Sarcon® XR-Pe delivers thermal conductivity of 11 W/m°K with thermal resistance as low as .06°C in.Â-²/W. Silicone-based material conforms to most CPU and semiconductor shapes with minimal compression force requirement, and soft-touch characteristic is maintained for applications that require material compression from 30%–90%. Supporting...

Read More »
Adhesive Tapes

Tamper Evident Security Tape adheres to difficult surfaces.

Applicable to such difficult surfaces as stretch wrap, shrink film, and recycled corrugated cartons in temperatures down to +20°F, PVT and EVT Series indicate tampering within 1 min of application. Service temperature ranges from -40 to +200°F, and 2 mil polyester film construction promotes strength during shipping/handling. Offered in 1, 2, and 3 in. widths, TSA-CCSP compliant tapes...

Read More »
Ford Fusion Rear Window in Lightweight Concept Version Loses 35 Percent of Its Weight with Polycarbonate Solution from SABIC
Resins

Ford Fusion Rear Window in Lightweight Concept Version Loses 35 Percent of Its Weight with Polycarbonate Solution from SABIC

With the automotive industry focused on hitting future fuel economy and emission targets, the Ford Motor Company has revealed a drivable multi-material lightweight vehicle (MMLV) with an advanced polycarbonate (PC) glazing solution from SABIC’s Innovative Plastics business that makes possible a 35 percent weight reduction compared to the same window on a 2013 model year Ford Fusion production...

Read More »

All Topics