ESAB to Sponsor 2015 Nitto King of the Hammers
Welders

ESAB to Sponsor 2015 Nitto King of the Hammers

Florence, SC – ESAB Welding Cutting Products is proud to be the official welding sponsor of the 2015 Nitto King of the Hammers, a grueling off-road race that combines high-speed desert racing and rock crawling in a 165-mile course set in Johnson Valley, CA.Â-  A full week of racing will start on Sunday, February 1, 2015 with more than 300 teams competing before more than 35,000 fans in...

Read More »
Sealing Equipment

Schneider Packaging Robotic Palletizing and Case Sealing Where Ever You Need it

At Automate 2015, McCormick Place, Chicago, Booth # 626 CHICAGO, IL (MARCH 23-26, 2015) Schneider Packaging Equipment Co., Inc., specializing in end-of-line solutions for case packing, sealing, and palletizing needs, will exhibit two of its most portable solutions, the Robox palletizer and the SR5000WAT case sealer, at Automate 2015, McCormick Place, Chicago, Booth # 626. SchneiderÂ-¹s...

Read More »
Adhesives

Innovative, Light-Curable Dymax Adhesives and Curing Equipment to be Showcased at MD&M West

Torrington, Connecticut – Dymax Corporation, a leading supplier of adhesives to the disposable medical device industry, will exhibit in Booth #2239 at MDM West, scheduled to take place February 10-12, 2015 at the Anaheim Convention Center in Anaheim, CA. With over 30 years of direct participation, Dymax continues to provide medical device manufacturers with innovative adhesive products and...

Read More »
Adhesives

Electric Paint suits 3D printing applications.

Consisting of electrically conductive liquid wire, Electric Paint can be used as cold-soldering medium or conductive adhesive. Non-toxic and solvent-free, product is suitable for rapid prototyping, repairing PCBs, and painting circuits and sensors on any surface. Once printed or applied, paint dries quickly at room temperature and can be removed with soap and water.

Read More »
Sealing Equipment

Schneider Packaging's Water Activated Tape Case Sealer Improves Package Safety and Recycling

At Pack Expo East 2015, February 16-18, at Pennsylvania Convention Center, Philadelphia, Booth #1233 PHILADELPHIA, PAÂ- — Schneider Packaging Equipment Co., Inc., specializing in end-of-line solutions for case packing, sealing, and palletizing will exhibit the 5000WAT case sealer at Pack Expo East 2015, Pennsylvania Convention Center, Philadelphia, Booth #1233. The 5000WAT brings the...

Read More »
Long Fiber Thermoplastic Compounds feature low VOCs.
Polypropylene

Long Fiber Thermoplastic Compounds feature low VOCs.

Designed for structural use, Very Long Fiber Reinforced Polypropylene Compounds satisfy OEM mandates to reduce VOC levels found in thermoplastic materials specified for use in automotive interior applications. Low emission PP VLF compounds provide optimized strength, stiffness, and dimensional accuracy, with reinforcement levels of 20–50 weight%. Environmentally friendly products are used for...

Read More »
Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion
Epoxies

Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion

Master Bond EP42HT-2LTE is often chosen for a variety of bonding, sealing, coating and select casting applications in the electronic, aerospace, optical and specialty OEM industries. This two component epoxy has a flowable paste consistency that enables precise alignment with minimal fixturing. It cures at room temperature or more quickly with the addition of heat. This system is notable for...

Read More »
Gasketing Resin cures on demand.
Gaskets

Gasketing Resin cures on demand.

Used as alternative to tapes, PSA die-cut gaskets, 2K epoxies, silicone rope, or RTV sealants, GA-201 seals heat-sensitive substrates such as plastic enclosures. Moisture- and chemical-resistant FIP/CIP gasket acts as barrier to prevent absorption or penetration of air, dust, dirt, noise, liquids, or gaseous substances. Cured by UV/Visible light, tack-free product can be dispensed into intricate...

Read More »
Critical Uniformity Requirement for Contact Lens Curing Greatly Surpassed with Despatch Oven
Ovens

Critical Uniformity Requirement for Contact Lens Curing Greatly Surpassed with Despatch Oven

To manufacture contact lenses, a monomer resin called hydrogel" is injected into molds and heat-cured in an oven. The process polymerizes the hydrogel to produce hard, slightly flexible lenses. The lenses are then removed from the mold and transferred to a downstream hydration process. Â-  These hydrogel thermal curing cycles can be relatively long—up to 34 hours—and require a reliable...

Read More »
Pres-On Exhibits Competitive HVAC Foam Gasketing Tape Solutions at 2015 AHR Expo: Booth 6822
Adhesive Tapes

Pres-On Exhibits Competitive HVAC Foam Gasketing Tape Solutions at 2015 AHR Expo: Booth 6822

Housing science, service, and deep application expertise within a single state-of-the-art manufacturing facility enables Pres-On to more efficiently provide adhesive product solutions to HVAC customers. BOLINGBROOK, IL – Pres-On will be one of the 2,000 companies exhibiting HVAC specific solutions at the upcoming 2015 AHR Expo, occurring January 26th through 28th at McCormick Place in Chicago,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers