Temperature/Humidity Chambers operate at noise levels below 55 dB.
Bench-top chambers incorporate refillable water tank and have interior volumes from just under 1 ftÃ-³ to 2.2 ftÃ-³. SH series chambers perform temperature and humidity testing, while SU series units perform temperature testing. Externally, smaller units measure 17 x 27 x 25 in. high and weigh less than 175 lbs. Offered with 3 temperature ranges, lower limits are -4, -40, or -76Ã-
Read More »
Single/Dual-Gate Logic Devices provide ring-free switching.
Ultra Low Power TinyLogic(TM) products operate over 0.9-3.3 V Vcc range. Suited for low-voltage, battery-powered, portable applications, NC7SP models offer propagation delays of 6 ns at 1.8 V and 3 ns at 3.3 V. NC7SV models offer 1.9 ns propagation delays at 1.8 V, and 1 ns at 3.3 V. All models provide Over Voltage Tolerant (OVT) inputs and outputs that interface with devices operating up to 3.6...
Read More »
Gas Furnace provides quiet operation.
Horizontal 80 is an 80% AFUE furnace that offers heating range of 50,000-125,000 Btuh and supports cooling capacity of 1-½ tons. Crimp-Tite(TM) heat exchanger has crimped mechanical seams, which eliminate stresses developed with arc or seam welding and protects aluminized coating. Furnace includes heavy gauge cabinet for corrosion protection, Honeywell-® slow-opening gas valve, integrated...
Read More »
PTFE Insulated Heaters suit caustic or corrosive environments.
Thermofoil(TM) heaters are 0.025 in. thin and resistant to most acids and bases. Sealed PTFE insulated leadwires allow immersion in chemicals such as acid baths, etching systems, and chemical processing tanks. Suitable for operation to 260Ã-
Read More »
PCB Fabrication Notes Guide
The overall purpose of your fabrication notes is to enhance Design for Manufacturability for optimal PCB fabrication and assembly while maintaining applicable industry standards and regulations.
Read More »
Burner fires into 10 in. diameter immersion tubes.
Model IP010 ImmersoPak burner has 3 MBtu/hr input. Nozzle-mixing burner comes complete with packaged combustion air blower. Unit is multi-fuel capable and operates with control method of modulating air. It is suitable for heating immersion tubes on cleaning tanks, spray washers, salt baths, quenching tanks, tempering tanks, asphalt tanks, and similar equipment.
Read More »
Aluminum Silica Insulation exhibits uniform hardness and density.
TYPE Z-500 is made of 60% SiO2 and 40% Al2O3 with nominal bulk density of 50 pcf and average surface hardness of 93 on A scale. It exhibits 0.65% shrinkage after 25 hr at 800Ã-
Read More »
Truck Ovens have easy to see pilot lights.
Gas and electric ovens are offered with cart guide tracks and heating chambers of 47.5, 80, 125, and 180 ftÃ-³. Maximum temperatures reach 500 or 800Ã-
Read More »
Burner System meets NFPA requirements.
HeatPak, with integrated valve train and control box, includes double valve with gas pressure switches, Veri-FlameÃ-® modulating flame monitor, and ignition transformer. It can be used on burners with Ã-½ to 2 in. piping up to 6 MMBtu/hr inputs. It is available with 2 options: one with choice of scanner or flame rod, and another proof of position using either switches on burner or...
Read More »
Heating Elements are designed for various furnace atmospheres.
Designed for use at very high temperatures, Super elements work directly in furnace atmosphere without protective muffles. Five grades are available. Elements are suitable for nitrogen, hydrogen, vacuum, and mixtures of endogas, and reducing furnace atmospheres. Ready-made elements can be used in production and laboratory furnaces in glass, steel, electronics, ceramics, and heat treatment...
Read More »
Heat Exchanger cools electrical control cabinets.
Model WW4000S water-to-air heat exchanger, housed in 19.69 x 31.50 x 7.09 in. enclosure, is suited for operation in extremely polluted and high temperature environments. Its design employs internal thermostat and 2 fans that produce 648 cfm air flow. Cooling water flow of 3.5 gpm at 50Ã-
Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.
Read More »
