New Holders Products

Monitor Stand measures 3 15/16 x 23 1/4 in.

Designed for multimedia and displays industry, Expand MonitorStand can be used as freestanding monitor holder, or can be completely or partially integrated with Expand 2000. Pole is available in heights of 48 1/16, 68 7/8 and 76 3/4 in., and weighs 6.2-9.25 lb. Foot, including adaptors and fastening device, weighs 28.2 lbs. Pole is made of aluminium while foot is constructed of cast iron with...

Tool Holders work with shrink fit machines.

Suited for Makino MAG machines, HSK80F Shrink Fit Holders are designed for machining of complex aluminum monolithic parts for aerospace. When used in combination with Shrink Fit Machine, holders heat up to expand inside diameter, and as they cool, thermal contraction exerts pressure that shrinks down around tool for uniform gripping. Process allows for tool changes in less than 30 seconds.

Rotary Broaching Tool Holders come in multiple shank sizes.

Available with 5/8 and Ã-¾ in. as well as 16 and 22 mm shanks, 0700 series Swiss Type Adjustment Free Rotary Broaching Tool Holders are used for producing hexagon and square holes in metal parts while eliminating secondary operations. While .500 in. tool bore in spindle accepts Slater standard-length hex, square, and 6-lobe rotary broaches, special form broaches with serration, spline,...

Holocom-® Announces Seven New Products and Improvements

(Fort Lauderdale, Fla - August 19, 2008) Holocom-® Networks, the leading provider of high-security protective distribution systems (PDS) for SIPRNet and other classified networks, today announced seven new products and improvements to several existing products. Holocom made the announcement at the Armed Forces Communications and Electronics Association's LandWarNet conference. Holocom's new...

Key Considerations for Medical PCB Assembly

This white paper provides an overview of key considerations for medical PCB assembly.

Cable Tie Holder uses pressure to facilitate assembly.

Pressure hold cable tie holder Model FTH-33 allows pre-assembly of cable tie into holder and secures it in position. Cupped mounting base prevents dust ingress while providing tight grip to board in environments prone to vibration. Part accepts all Richco QTE-30/50 and WIT-30/50 cable ties.

REGO-FIX to Showcase powRgrip-® PG Collet System at WESTEC

Indianapolis, Indiana, February 5, 2008 - REGO-FIX will display an innovative lineup of toolholding solutions at WESTEC 2008. Among the featured products in booth #2428 is the powRgripÃ-® PG 32 collet system, the new industry standard for toolholding. Designed to provide a greater clamping range for its customers, the powRgrip PG 32 collet system will be on display from March 31 - April 3 at...

Parlec to Showcase its Innovative Technologies and Products at WESTEC 2008

Rochester, NY, January 28, 2008 - Parlec, Inc., a worldwide leader in tooling, workholding, and presetting solutions, announced it will exhibit its presetting, high-speed tooling, workholding, and driven and static solutions at WESTEC 2008 Exposition and Conference in Los Angeles, California, March 31 - April 3, 2008, Booth 2963. Parlec will showcase its Series 1500 Parsetter TMMÃ-®, the...

SCHUNK has Tightened te Balance Specification on All Toolholders to Ensure That Our Customers Can Yield the Finest Results.

How does balance effect the metal cutting process? The answer is simple, out-of-balance creates vibration, vibration causes chatter, and chatter causes many problems such as poor surface finish, inability to hold size, and reduction in tool life. Balance is categorized in our industry by applying a balance grade, GX.X. - dependant on the component's influence on the full machine system....

Press Brake Clamping Components Eliminate Need for Set Screws

December 11, 2007 The PowerExpressÃ-® die clamp and Express ClampÃ-® die holder from Wilson Tool InternationalÃ-® are designed to eliminate the need for set screws in press brakes to speed die changes. The automated hydraulic die clamp provides one-touch clamping for American-style press brakes. After loading the die, the operator presses a button to securely and accurately clamp the...

Collet System operates at up to 40,000 rpm.

Available in 30-, 40-, and 50-tapers, as well as HSK and 3-Lock models, VC Toolholder features runout within 0.00012 in. at 4 x D. Smooth profile eliminates noise related to high-speed rotation, while groove under nut dampens micro-harmonic vibrations. TiN bearing nut maximizes torque by minimizing friction associated with nut tightening. VC Collet System features 8Ã-

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.