Epoxies

Structural Epoxy Adhesive/Sealant is BPA-free and non-hazardous.
Epoxies

Structural Epoxy Adhesive/Sealant is BPA-free and non-hazardous.

With 90 min work life, SetWORX 90 toughened, 2-part epoxy adhesive bonds to such diverse substrates as metals, glass, ceramics, wood, and plastics. This Bishphenol A (BPA)-free system, offered in dual cartridges that let operator mix and dispense without weighing and mixing concerns, operates at elevated temperatures and maintains bond strength. Product comes in 50, 200, and 400 mL cartridges...

Read More »
Structural Bonding Epoxy has high-strength, one-part formula.
Epoxies

Structural Bonding Epoxy has high-strength, one-part formula.

Suited for aerospace and specialty OEM industries, Master Bond® EP13SPND-2 offersÂ- respective tensile lap shear strength, compressive strength, and tensile modulus of over 3,000 psi, 18,000 psi, and 500,000–550,000 psi. Single-component nature aids handling and does not require mixing prior to use. Serviceable from -60 to +500°F, chemical-resistant and dimensionally stable...

Read More »
Epoxy Polysulfide System exhibits high thermal conductivity.
Epoxies

Epoxy Polysulfide System exhibits high thermal conductivity.

Along withÂ- 9-10 BTU•in/ft²•hr•Ã‚°F thermal conductivity, EP21TPFL-1AO electrically insulative, 2-part system exhibits chemical resistance and offers 150%–200% elongation, 70-90 Shore A hardness, and 2:3 mix ratio by weight or volume. Black and white color coding facilitates mixing, and working life is 90–120 min at 75°F. Curing fully at ambient...

Read More »
Coatings

Epoxy Coating suits applications above or below water.

Based on blend of liquid epoxy polymer and aliphatic polyamine curing agents, KALCOAT™ 560 can displace water from wet surfaces to make permanent bond. High build 100% solids epoxy coating is solvent-free and incorporates Kevlar® microfibers for reinforcement and viscosity management for high application rates. KALCOAT 560 can be used as anti-corrosive coating, repair compound, fairing...

Read More »
UV Cure Adhesive suits circuit assembly applications.
Encapsulants

UV Cure Adhesive suits circuit assembly applications.

Designed to cure rapidly when exposed to high-intensity UV light, 535-11M-7 Epoxy is suitable for lens bonding in camera modules, chip encapsulation in smart cards, and variety of general bonding applications in photonics assembly. Flexible, high-strength epoxy adhesive is non-conductive, low-outgassing, and does not contain antimony.

Read More »
Two-Part Epoxy Paste has ultra low thermal resistance.
Coatings

Two-Part Epoxy Paste has ultra low thermal resistance.

Master Bond EP48TC has thermal resistance of 5–7 x 10–6 K•m2/W, which enables thermal conductivity of 20–25 BTU•in/ft2•hr•Ã‚°F. Applied in bond lines as thin as 10–15 microns, epoxy paste has tensile lap shear strength from 900–1,100 psi and bonds to metals, composites, glass, ceramic, and plastics. Working life for 100 gram batch at 75°F is 90–120 min. Curing at...

Read More »
Epoxy Stick facilitates fuel tank repairs.
Putty

Epoxy Stick facilitates fuel tank repairs.

Offering resistance to ethanol and most solvents, Permatex Fuel Tank Repair Epoxy Stick is suited for filling holes and damaged seams in both metal gas tanks and containers. Product comes as 2-part putty in stick form which helps measure and mix proper amount. Finished repair sets in just 1 hour and can be drilled, sanded, threaded, or filed after 5 hours. When fully cured, epoxy withstands...

Read More »
Fast Cure Adhesives suit cartridge dispensing.
Epoxies

Fast Cure Adhesives suit cartridge dispensing.

Suitable for use with TriggerBond® dispensing guns, TriggerBond EpoxiesÂ- offer shear strength up to 1,500 psi and notched Izod impact of 2.7 ft-lb/in. Adhesive's 2 components are packaged into cartridges, which fit in dual-barrel dispensing gun. Because cartridges contain precise quantities of hardener and resin, TriggerBond produces correct mix ratio every time user squeezes...

Read More »
UV-Cured Epoxy Adhesive increases electronic assembly reliability.
Epoxies

UV-Cured Epoxy Adhesive increases electronic assembly reliability.

Developed to pass reliability requirements in disk drive, camera module, photonics, and circuit assembly applications, 535-11M-3 eliminates crowning (warpage) of sliders in Head Gimbal Assemblies. This non-conductive, low-outgassing, flexible adhesive does not contain antimony and can be used in other bonding applications in Head Stack Assembly as well as for lens bonding in camera modules, chip...

Read More »
Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion
Coatings

Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion

Master Bond EP42HT-2LTE is often chosen for a variety of bonding, sealing, coating and select casting applications in the electronic, aerospace, optical and specialty OEM industries. This two component epoxy has a flowable paste consistency that enables precise alignment with minimal fixturing. It cures at room temperature or more quickly with the addition of heat. This system is notable for...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers