Epoxies

High Temperature Epoxy seals tubular heaters to 570°F.
Epoxies

High Temperature Epoxy seals tubular heaters to 570°F.

Consisting of unfilled, 100% solids epoxy system, Aremco-Bond(TM) 526N can be used continuously at temperatures to 570°F. Product features volume resistivity of 4.0 x 1014 W-cm, dielectric strength of 450 V/mil, and dielectric constant of 3.01 at 1.0 Hz. Flexural and tensile strengths are 16,000 and 2,800 psi, respectively. With 1:1 mix ratio, epoxy provides mixed viscosity of 4,000 cP and...

Read More »
Epoxy Adhesive/Sealant meets USP Class VI requirements.
Epoxies

Epoxy Adhesive/Sealant meets USP Class VI requirements.

Suited for medical applications, silver-filled EP3HTSMED is 100% reactive with tensile shear strength exceeding 1,000 psi and volume resistivity less than 0.001 Wcm. Thixotropic paste requires no mixing and needs only contact pressure during heat cure of 20-40 min at 300°F or 40-90 min at 250°F. Serviceable over temperature range of -60 to 400°F, electrically conductive product...

Read More »
Sprayable Ceramic Coating features reusable cartridge dispenser.
Coatings

Sprayable Ceramic Coating features reusable cartridge dispenser.

Packaged in 90 mL reusable dual-cartridge dispenser, Loctite® Nordbak® 7255(TM) protects metal surfaces on industrial equipment from wear, abrasion, and corrosion. Two-part, solvent-free, thixotropic epoxy creates smooth, low-friction surfaces and may be used in overhead applications. Suitable for large surfaces and complex or intricate areas, coating can protect tank linings, mixing...

Read More »
UV Curable Epoxy exhibits strength, chemical resistance.
Coatings

UV Curable Epoxy exhibits strength, chemical resistance.

Formulated for bonding, sealing, and coating, UV16 single-component, no-mix system cures in 1 min or less at room temperature with commercial UV light sources. This 100% reactive epoxy, uninhibited by oxygen, does not release any solvents or volatiles during cure. Cured in thicknesses up to 0.125 in. with 2%-3% shrinkage rate, solution delivers tensile strength exceeding 4,100 psi and Shore D...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
New Electronic Materials to be Debuted at Productronica 2011 in Munich
Flux

New Electronic Materials to be Debuted at Productronica 2011 in Munich

Henkel solutions address miniaturization, sustainability and cost-efficiency in modern electronics As the functionality of modern electronics products has increased exponentially in tandem with decreasing dimensions, the demands on performance and reliability of electronic materials have reached an unprecedented level. Today's electronic materials - spanning nearly all market sectors - must...

Read More »
Encapsulation Equipment

Does Weight Matter?

Epoxies, Etc. Develops Low Density Epoxy... 20-3035 Epoxy Syntactic Foam System The weight of 20-3035 is less than half of most commercially available potting and encapsulating compounds. This epoxy syntactic foam system utilizes technologically advanced micro balloons. This provides for a low density, low coefficient of thermal expansions, low shrinkage, and a stiff finished product. This unique...

Read More »
Anisotropic Conductive Adhesives suit LCD manufacturing.
Epoxies

Anisotropic Conductive Adhesives suit LCD manufacturing.

Available as paste, film, or pressure-sensitive tape, Anisotropic Conductive Adhesives are conductive in Z-axis and non-conductive in X- and Y-axis. During curing process, particles in adhesive become stacked in vertical configuration, providing conductivity for component that is mounted to surface, while remaining electrically insulating on X and Y axes. Applications include RFID manufacture,...

Read More »
Epoxy Adhesives meet military specifications.
Epoxies

Epoxy Adhesives meet military specifications.

Designed to meet extensive certification requirements of Test Method 5011 in MIL-STD 883, EPO-TEK®H20E- MP and EPO-TEK® EK1000-MP deliver optimal thermal management and electrical conductivity. Single component, silver-filled EPO-TEK EK1000-MP is formulated with shiny finish to maximize device reflectivity. Both products are suited for solar modules and concentrators, LEDs, and high...

Read More »
Epoxy Patch Compound is for emergency repairs to processing equipment.
Miscellaneous Compounds

Epoxy Patch Compound is for emergency repairs to processing equipment.

With 4 min working time and ability to achieve functional cure in 30 min, DFense Blok(TM) Quick Patch is formulated for emergency repairs to processing equipment, even in severe conditions, and suited for patching of holes, leaks, and cracks. Alumina ceramic bead-filled epoxy compound protects against wear, abrasion, and corrosion and helps extend equipment service life. Non-sagging product can...

Read More »
Epoxies

G5: Now for Cracked, Uncracked, & Seismic Conditions

Addison, IL - Epcon G5 adhesive, manufactured by ITW Red Head has received an updated evaluation report (ESR# 1137) from ICC Evaluation Service, Inc. (ICC-ES). This report now certifies the use of G5 in cracked, uncracked and/or all seismic conditions. Building officials, architects, contractors, specifiers, and others utilize evaluation reports to provide a basis for using or approving G5 in...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers