New ULTRABOND EPX-3CC is Formulated with 1:1 Mix Ratio and 24-month Shelf Life
ULTRABOND® HYB-2CC is ideal for use in dry, damp or water-filled holes in cracked and uncracked concrete. Cures completely in 30 minutes at 70 F as well as can be applied in temperatures down to 23 F. ULTRABOND® EPX-3CC is a high-performance anchoring epoxy ideal for high volume specifications.
Read More »
NASA Low Outgassing Rated Epoxy Features Enhanced Chemical Resistance
EP42-2LV Black is a two part epoxy with low viscosity and good flow. It withstands prolonged immersion in many acids, bases, solvents, fuels and oils. This versatile system can be used for bonding, sealing, coating and casting, where a strong chemical resistance profile is required. This compound has an easy to use mix ratio of 100 to 40 by weight or 100 to 50 by volume with Part A being black...
Read More »
Epoxy with High Elongation Passes ISO 10993-5 Certification for Cytotoxicity
Master Bond EP40Med, a two part epoxy system, combines toughness and a low tensile modulus while still providing a relatively high lap shear strength. It meets the requirements of ISO 10993-5 testing and is therefore considered to be non-cytotoxic. This compound can be used for bonding, sealing, coating and encapsulating. EP40Med resists sterilization to gamma, EtO, chemicals, and liquid...
Read More »
New EP35SP Epoxy from Master Bond is Ideal for Bonding and Sealing Applications
Provides resistance to chemicals such as oils, acids, bases, water, fuels, and especially petrochemicals. Features high glass transition temperature (Tg) and -62°C to +288°C temperature range. Offers dielectric properties with dielectric constant of 4.5 at 60 Hz and volume resistivity greater than 1014 ohm-cm.
Read More »
Metal Stamping for Lighting and Electronics Applications
This white paper provides an in-depth look into metal stamping for lighting and electronics applications.
Read More »
New EP17HTS-DA Die Attach Epoxy Meets MIL-STD-883J Requirements
Offers high die shear strength of 35-40 kg-f at room temperature that is electrically conductive and can withstands high temperatures. Features low volume resistivity of less than 0.005 ohm-cm. Requires heat cure of 300°F for 2 to 3 hours, followed by post curing at 350°F for 1 to 2 hours.
Read More »
New Epoxy Polysulfide Adhesive Resists Temperatures up to 350 degree F
EP21TPHT offers high lap shear strength of 1,600-1,800 psi and bonds to a variety of substrates including metals, composites and rubbers. Withstands exposure to a wide range of chemicals including but not limited to fuels, oils, hydrocarbons and hydraulic fluids. Available for use in double barrel syringes and gun dispensers as well as in 1/2 pint, pint, quart or gallon container kits.
Read More »
Toughened, Urethane Based Epoxy System Meets USP Class VI Specifications
Master Bond EP30DPBFMed is a two part, flexibilized epoxy-urethane hybrid system that can be used for bonding, sealing, coating, and encapsulation. It is formulated for disposable and reusable medical devices, meeting USP Class VI requirements while also complying with RoHS3 in accordance with the EU directive 2015/863/EU. EP30DPBFMed is resistant to thermal cycling and sterilization,...
Read More »
New Eco-MVR 100 Complies with SCAQMD VOC Regulations
Provides advanced protection against deleterious and costly effects of MVT. Can contribute to LEED® v4 Indoor Air Quality credits. Offers significant advantage over competition in both shorter installation times as well as overall system performance.
Read More »
New Supreme 112 Epoxy from Master Bond Provides High Bond Strength and Reliable Electrical Insulation
Offers low viscosity of 50-200 cps, long open time of 2-3 days at room temperature and is ideal for bonding, sealing, potting and impregnation applications. Features high glass transition temperature of 190-195°C and is serviceable up to 288°C (550°F). Requires three step oven curing process of 1-2 hours at 200°F, followed by 3-4 hours at 250°F and then 4-6 hours at 300°F.
Read More »
New Macropoxy HS 4200 Delivers Long-Term Corrosion Protection and Abrasion Resistance
Can be applied at proper film builds. Allows the painter to hang additional wet mils in areas requiring overlapping coats. Provides effective, economical protection from exterior corrosion on tanker and hopper railcars.
Read More »
Locon Sensors Withstand Extreme Temperatures
Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.
Read More »
