Epoxies

Fiber Optic Adhesives provide optimized polishing surface.
Epoxies

Fiber Optic Adhesives provide optimized polishing surface.

Comprising 2-component epoxies with 86 Shore D hardness, Mereco 3500 Series produces hard, smooth, and cleanÂ- polishing surface for terminating single- and multi-mode fiber optic connectors and fiber optic bundle potting, encapsulating glass fibers in ferrules, and bonding to variety of substrates, including most metals, glass, plastic, and ceramic. Six formulations are available with...

Read More »
Epoxy Adhesive offers temperature resistance up to 350°F.
Epoxies

Epoxy Adhesive offers temperature resistance up to 350°F.

Offering tensile shear strength of 4,560 psi, Aremco-Bond™ 2300 consists of 100% solids epoxy mixed in ratio of 10 parts resin to 1 part hardener by weight. Mixed viscosity is 5,000 cP and pot life for 100 g mass is approximately 45 min. Milky-clear product provides resistance to acids, alkalis, organic fluids, and salts. Supplied in pint, quart, and gallon kits, adhesive is suited for bonding...

Read More »
Thermally Conductive Epoxy suits bonding applications to 400°F.
Encapsulants

Thermally Conductive Epoxy suits bonding applications to 400°F.

Mixed in ratio of 1 part base resin to 1 part activator by weight, Aremco-Bond™ 860 exhibits optimal adhesion to high temperature plastics such as polyimides and composites, as well as ceramics, glass, and high expansion metals. Aluminum nitride filled epoxy curesÂ- in 24 hr at room temperature or in 2 hr at 200°F. After curing, product exhibits thermal conductivity of 8.5...

Read More »
Epoxies

Epoxy Adhesive has halogen-free, high-temperature formula.

Offered in 2-part kits or premixed and frozen syringes, Epoxibond 112LC-1 bonds ceramic, glass, plastic, metal, and other substrates that require heat and chemical resistance. Clear, unfilled, 100% solids epoxy system exhibits tensile strength of 2,200+ psi, has 90+ shore D hardness, and can snap cure at 150°C or higher. With pot life of 6+ hr, halogen-free product can also be used to pot...

Read More »
Encapsulants

United Resin Introduces Halogen Free Systems!

Royal Oak, Michigan - November 9, 2012- United Resin Corporation is pleased to introduce new Halogen free systems. Designed to be in compliance with IEC-61249-21 concerning the limitation of certain amounts of chlorine, bromine, and halogens. The COB systems are Epoxy Dam Control, Epoxy Fill System, Low and High Profile Glop Tops and Low Chlorine Encapsulant. The SMT system is Cicuitbond. All...

Read More »
Flexible Adhesive serves high-temperature applications.
Epoxies

Flexible Adhesive serves high-temperature applications.

Able to be used in applications to 400°F, Aremco-Bond(TM) 820 is suited for general-purpose bonding of ceramics, glass, plastics, metals, and other substrates. This clear, unfilled, 100% solids epoxy system mixes in 1:1 ratio, providing mixed viscosity of 12,000 cps and cure time of 45 min at room temperature. Along with respective flexural and tensile shear strengths of 8,000 and 1,200...

Read More »
One-Component Epoxy maintains properties over temperature range.
Epoxies

One-Component Epoxy maintains properties over temperature range.

Able to withstand stretching, impact, and heating/cooling, 50-3122 is formulated to maintain optimal peel and shear strength over -60 to +205°C range. This 100% solids system, in addition to offering electrical insulation, is resistant to vibration, stress fatigue cracking, and chemicals. Product does not require any mixing and cures in 5 min to 2 hr depending on cure temperature. Areas of...

Read More »
Epoxy Adhesive survives in continuous temperatures to 285°F.
Epoxies

Epoxy Adhesive survives in continuous temperatures to 285°F.

Developed to bond engineering materials such as composites, thermoplastics, metals, and ceramic materials, Permabond ET5401 can survive 285°F continuously while maintaining its performance characteristics. Exposure to higher temperatures for short periods is possible, providing adhesive is not overly stressed. Exposure to 175°F for 1 hr increases adhesive strength and long-term...

Read More »
High-Strength Epoxy meets NASA low outgassing specifications.
Epoxies

High-Strength Epoxy meets NASA low outgassing specifications.

Able to adhere to metals, glass, ceramics, and plastics and withstand temperatures from 4K to +400°F, Supreme 10HT exhibits tensile shear strength in excess of 3,600 psi and T-peel strength up to 30 pli. Flexibility and toughness foster resistance to thermal cycling, mechanical shock, vibration, and stress fatigue cracking. Able to withstand exposure to variety of chemicals, single-part...

Read More »
Kalpoxy NS Wear Compound
Resins

Kalpoxy NS Wear Compound

Abresist Kalenborn Corporation offers KALPOXY NS, a non-sagging epoxy bonded wear compound suitable for repairing almost any surface, including piping and pumps. This two component wear compound contains more than 70% fine grain silicon carbide (SiC) particles combined with DuPont Kevlar® fibers for excellent abrasion resistance, toughness and adhesive properties. KALPOXY NS is easy to use...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers