
NASA Low Outgassing Approved, One Component Epoxy Features a Glass Transition Temperature of 225°C
Formulated to operate over the wide temperature range of -80°F to +650°F, Master Bond EP17HT-LO is a one part epoxy for bonding, sealing, coating and encapsulation applications. This low viscosity system has very low exotherm upon curing and can be cast in sections up to and beyond a Â-½ inch in thickness. As a single component system, it offers convenient handling, doesn’t...
Read More »Thermally Conductive Epoxy suits die attach applications.
Adhering to metals, ceramics, and silicon dies, Supreme 3HTND-2DA cures in 5–10 min at 150°C, offers die shear strength of 19–21 kg-f, and is serviceable from -100 to +400°F. One-part, electrically insulative epoxy passes NASA low outgassing test specifications and has low ionics, particularly chlorine at
Read More »
High-Temperature Adhesive bonds dissimilar materials.
Resistant to corrosion, chemicals, thermal shock, and electricity, Resbond™ S5H13 suits adhesive applications up to 500°F. Epoxy bonds heavy plastic to stainless steel; seals and insulates Bi-Polar, Electro-Cauterizers; and withstands thousands of steam sterilization cycles at 375°F. Adhering toÂ- metals, plastics, composites, glass, and ceramics, paste cures at room...
Read More »Air Products to Showcase Its Epoxy Curing Agents for Adhesives and Composites Industries at CAMX 2014
LEHIGH VALLEY, Pa. –Â- For more than 30 years, Air Products (NYSE: APD) has been a leading supplier of epoxy curing agents and accelerators to the adhesives and composites industries. Air Products will feature these products at next week's CAMX, the Composites and Advanced Materials Expo, in Orlando, Fla., October 13-16. Air Products' experience with high-performance epoxy...
Read More »
You're Gonna Need a Bigger Boot
Learn about sealing boot types and applications in marine environments.
Read More »
One Part Epoxy Resists up to 500°F and Meets NASA Low Outgassing Specifications
Master Bond Supreme 12AOHT-LO is a one component epoxy for a variety of bonding and sealing applications in the aerospace, electronic, electro-optic and OEM industries. This system fully passes ASTM E595 testing for NASA low outgassing and is well suited for vacuum environments. As a toughened epoxy, Supreme 12AOHT-LO resists rigorous thermal cycling and shocks over the wide service temperature...
Read More »Hybrid Adhesive features structural cyanoacrylate technology.
CombiningÂ- bond strength of structural epoxy with speed of instant adhesive, Loctite® 4090™ offers rapid, high-strength bonding to range of substrates, including metals, most plastics, and rubbers. Product offers impact, moisture, and UV resistance, as well as temperature resistance to 300°F. Available as 50 ml cartridge packaged with 5 mix nozzles, gel...
Read More »Thermally Conductive, Two Component Epoxy Passes USP Class VI Tests and ISO 10993-5 Specifications
With biocompatibility and cytotoxicity certifications, Master Bond EP21AOLV-2Med is often selected for bonding, sealing, coating and encapsulation applications in the medical device industry. This two component epoxy system withstands a variety of sterilization methods, including EtO, radiation and many cold sterilants. EP21AOLV-2Med is thermally conductive and electrically isolating with a...
Read More »Single-Component, Snap Cure Epoxy exhibits high strength.
Curing in 1–2 min at 300°F, Master Bond EP3SP5FLÂ- has flowable, moderate viscosity and adheres to such substrates as metals, composites, glass, ceramics, rubbers, and plastics. Tensile lap shear strength exceeds 2,000 psi at room temperature when bonding aluminum to aluminum. Also acting as effective electrical insulator, epoxy has -60 to +200°F service range....
Read More »Stuart Dean Brings Interior and Exterior Restoration Solutions to AIA 2014 Convention in Chicago
- Company to Showcase HardCore Product Line and Marcoat - NEW YORK - Stuart Dean will give architects and design professionals a first look at its new HardCore product line for floor and wall resurfacing, restoration and protection at the American Institute of Architects (AIA) 2014 National Convention, taking place June 26-28 in Chicago at McCormick Place. Stuart Dean will also showcase its...
Read More »
Low Viscosity, Two Component Epoxy is Optically Clear with Non-Yellowing Properties
Low Viscosity, Two Component Epoxy is Optically Clear with Non-Yellowing Properties Master Bond EP112LS is a two part epoxy that is well suited for impregnation, potting, encapsulation, sealing and coating applications, particularly in the aerospace and optoelectronics industries. EP112LS is optically clear, features reliable non-yellowing properties and has a refractive index of 1.55. This...
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »