Epoxies

Adhesives for Your Specific Need
Epoxies

Adhesives for Your Specific Need

MasterSil 157: Addition Cured Silicone with Wide Temperature Serviceability MasterSil 157 is a two part system for potting, encapsulation and sealing applications. This optically clear formulation features a low index of refraction and has the ability to transmit light very well from 220-2,500 nanometers. These properties are retained over the exceptionally broad service temperature range of...

Read More »
Rapid Curing Two Component Epoxy Offers Impressive Chemical Resistance and High Bond Strength
Epoxies

Rapid Curing Two Component Epoxy Offers Impressive Chemical Resistance and High Bond Strength

Master Bond EP41S-F is a two part epoxy for bonding, sealing, coating and encapsulation applications. It combines fast ambient temperature cure speed with chemical resistance and superior electrical insulation properties. This versatile system is easy to handle and has a forgiving 100 to 25 mix ratio by weight. After mixing, EP41S-F polymerizes quickly and can usually be removed from a fixture...

Read More »
Epoxy Meets Airbus Standards for Flame Retardancy, Smoke and Gas Emissions
Epoxies

Epoxy Meets Airbus Standards for Flame Retardancy, Smoke and Gas Emissions

Formulated to meet rigorous Airbus specifications, Master Bond EP93FRHT passes the twelve second vertical burn test per AITM 2.0002B and Section 7.1.2 of ABD0031, Issue F; the smoke emission test per AITM 2.0007B, Issue 3 in the flaming mode and Section 7.3.2 of ABD0031, Issue F; and the toxic gas emission test per AITM 3.0005, Issue 2 in the flaming mode and Section 7.4 of ABD0031, Issue F....

Read More »
High Strength Epoxies for Plastic Bonding
Epoxies

High Strength Epoxies for Plastic Bonding

Lap shear strength is one of the most common stresses that a bonded joint can face, especially in structural bonding applications. It is tested by measuring the ability of an adhesive system to withstand stresses set in a plane, where the exerted shear force is moving the two substrates in opposite directions. This article evaluates select Master Bond epoxies that were recently tested for their...

Read More »
70-3812NC Epoxy Adhesive meets ASTM E-595-07 standards.
Epoxies

70-3812NC Epoxy Adhesive meets ASTM E-595-07 standards.

Providing enhanced bonding and thermal conductivity, 70-3812NC Aluminum Filled Epoxy Adhesive is suitable for bonded fin heat sink and pipe bonding in extruded aluminum base applications. Formulated to be cured at room temperature or with mild heat, product’s 10:1 mix ratio is easy for batch mixing or using Meter Mix and Dispense Equipment.

Read More »
Adhesives for Your Specific Needs
Epoxies

Adhesives for Your Specific Needs

EP30Med: Low Viscosity Epoxy Meets USP Class VI Specifications Ideal for encapsulation, bonding and sealing applications, EP30Med offers excellent electrical insulation properties and exceptionally low shrinkage upon cure. It is a two component, room temperature curing biocompatible epoxy adhesive designed for high performance medical device applications. It features high bond strength, superior...

Read More »
SCProbond™ Adhesives are non-corrosive epoxy system.
Epoxies

SCProbond™ Adhesives are non-corrosive epoxy system.

Formulated to adhere ceramic components in material handling, power generation, mining and petroleum industries, SCProbond™ Epoxy Adhesives are available in low (LV-1) and high viscosity (HV-1) versions. SCProbond™ LV-1 is used in installing components in horizontal applications whereas SCProbond™ HV-1 is designed for vertical and overhead tilting applications. Product features good...

Read More »
Two Component, Low Viscosity Epoxy Features Outstanding Chemical Resistance
Epoxies

Two Component, Low Viscosity Epoxy Features Outstanding Chemical Resistance

Master Bond EP62-1BF is a two part epoxy featuring the ability to withstand exposure to aggressive chemicals including acids, bases and solvents, even at high temperatures. “We tested the chemical resistance properties of EP62-1BF by taking cured samples of the system and immersing them in a variety of chemicals, like sulfuric acid, toluene, ammonium hydroxide, etc.,” said Venkat Nandivada,...

Read More »
Epoxies

SCProbond™ A/CRC Wear Compound is corrosion resistant.

Resisting chemical attack and sliding abrasion, SCProbond™ A/CRC Wear Compound is suitable for mining, construction, petrochemical, power generation and manufacturing operations. Compound can be applied as a protective layer in pump housings, elbows, hoppers, cyclones and dust collectors. Product is designed as an easy to mix and apply wear liner.

Read More »
Unbreakable Family Bonds
Epoxies

Unbreakable Family Bonds

Master Bond’s EP3 series features outstanding performance properties, long-term durability and easy application. These one part epoxies do not require mixing, eliminate waste and have an unlimited working life at room temperature. They are formulated to cure quickly at elevated temperatures and are also designed to increase productivity. These EP3 products are 100% reactive and do not contain...

Read More »

All Topics