Epoxies

New Epoxy Resists Multiple Sterilization Methods
Epoxies

New Epoxy Resists Multiple Sterilization Methods

EP42HT-4AOMed black offers cryogenic serviceability and heat resistance with a service temperature range from 4K to 400°F. Withstands aggressive chemical sterilants, radiation and repeated cycles of autoclaving. Contains a filler, which contributes to its high strength profile and dimensional stability.

Read More »
New Cationic Epoxy Features Low Water Absorption
Epoxies

New Cationic Epoxy Features Low Water Absorption

MD® 250-CTH is fully curable with broad-spectrum UV/Visible light at 365 nm, 385 nm, or 405 nm and/or with heat at 80-85°C to enable low-temperature heat-cure in 20-35 minutes. Formulated for manufacturers that require low shrinkage for lens alignment and cementing of endoscope/microscope lenses. Heat-only curing functionality is ideal for ensuring complete cure in true dark-shadow areas.

Read More »
B-Staged Epoxy Meets Airbus Standards for Flame Retardancy & Toxicity
Epoxies

B-Staged Epoxy Meets Airbus Standards for Flame Retardancy & Toxicity

Master Bond EP36FR is a specialized one part epoxy that meets Airbus specifications for toxic gas emissions per AITM 3.0005, Issue 2 in the flaming mode and Section 7.4 of ABD0031, Issue F. It also passes the 12 second vertical burn test per AITM 2.0002B and Section 7.1.2 of ABD0031, Issue F. EP36FR uses a non-halogenated filler. “These Airbus ratings are not just relevant for manufacturing...

Read More »
NASA Low Outgassing Rated Epoxy Features Enhanced Chemical Resistance
Epoxies

NASA Low Outgassing Rated Epoxy Features Enhanced Chemical Resistance

EP42-2LV Black is a two part epoxy with low viscosity and good flow. It withstands prolonged immersion in many acids, bases, solvents, fuels and oils. This versatile system can be used for bonding, sealing, coating and casting, where a strong chemical resistance profile is required. This compound has an easy to use mix ratio of 100 to 40 by weight or 100 to 50 by volume with Part A being black...

Read More »
Epoxy with High Elongation Passes ISO 10993-5 Certification for Cytotoxicity
Epoxies

Epoxy with High Elongation Passes ISO 10993-5 Certification for Cytotoxicity

Master Bond EP40Med, a two part epoxy system, combines toughness and a low tensile modulus while still providing a relatively high lap shear strength. It meets the requirements of ISO 10993-5 testing and is therefore considered to be non-cytotoxic. This compound can be used for bonding, sealing, coating and encapsulating. EP40Med resists sterilization to gamma, EtO, chemicals, and liquid...

Read More »
New Epoxy Polysulfide Adhesive Resists Temperatures up to 350 degree F
Epoxies

New Epoxy Polysulfide Adhesive Resists Temperatures up to 350 degree F

EP21TPHT offers high lap shear strength of 1,600-1,800 psi and bonds to a variety of substrates including metals, composites and rubbers. Withstands exposure to a wide range of chemicals including but not limited to fuels, oils, hydrocarbons and hydraulic fluids. Available for use in double barrel syringes and gun dispensers as well as in 1/2 pint, pint, quart or gallon container kits.

Read More »
Toughened, Urethane Based Epoxy System Meets USP Class VI Specifications
Epoxies

Toughened, Urethane Based Epoxy System Meets USP Class VI Specifications

Master Bond EP30DPBFMed is a two part, flexibilized epoxy-urethane hybrid system that can be used for bonding, sealing, coating, and encapsulation. It is formulated for disposable and reusable medical devices, meeting USP Class VI requirements while also complying with RoHS3 in accordance with the EU directive 2015/863/EU. EP30DPBFMed is resistant to thermal cycling and sterilization,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers