Epoxy Potting Compound has mixed viscosity of 6,700 cp.
Targeted for electronic assembly manufacturers, 2-part 20-3063 epoxy potting and encapsulating compound has 1:1 mix ratio with resin pigmented black and catalyst white for visual indication that products have been properly mixed. It cures at room temperature to 75-80 Shore D hardness, has 45 min pot life, usable temperature range of -40 to 130Ã-
Read More »Epoxy Adhesive resists exposure to repeated sterilization.
Resistant to thermal shock, EP45HT MED is formulated for use in assembly of reusable medical devices. This 2-component epoxy adhesive requires min heat cure of 250Ã-
Read More »Epoxy Adhesive offers flexible cure.
Nickel-filled, 2-component EP21TDCNFL is 100% reactive and does not contain solvents or volatiles. Product is prepared using 1:1 mix ratio by weight or volume, and once cured, has volume resistivity of less than 5-10 Ω/cm and tensile lap shear strength of 2,000 psi. Temperature range of 4Ã-
Read More »Compound suits potting and encapsulation applications.
Two-component Master Bond EP30DP epoxy/urethane elastomer can be cast in thick cross sections without development of undue exotherm during cure. With service operating temperature of -80 to +250Ã-
Read More »A Guide to Preventive Maintenance & Refurbishment of Your Tablet Press
Check out this guide to keeping your tablet press in good working order.
Read More »Epoxy Compound offers set time of 5-7 minutes.
High-viscosity TRA-BOND 216R01 exhibits lap shears of 3,600 psi with room temperature cure and 4,500 psi with 65Ã-
Read More »Flexible Plastic Bonder has thixotropic formulation.
With 1:1 mix ratio and Shore D hardness of 65, TRA-BOND 2170T suits applications that require chemical fastening to plastic parts. Amber epoxy adhesive bonds nylon, PVC, polyethylene, acrylic, lexan, polypropylene, kapton, and other thermoplastic substrates. Featuring working life of 2 hr, product and can be cured in 24 hr at room temperature or at accelerated rate in 65Ã-
Read More »Epoxy Glass Composite offers maximum flexural strength.
Thermoset composite material, Type NP510UD, combines unidirectional glass fabric with epoxy resin system that features Tg of 130Ã-
Read More »Epoxy Adhesives cure at room temperature.
Resistant to harsh environmental conditions, chemicals, and water, adhesive range includes clear, non-yellowing epoxy as well as flexible grade with peel-strength that allows flexibility of joint design while maintaining performance. Products come in dispensing cartridges with mixing nozzles and have 1:1 mix ratio of resin and hardener. They are suited for bonding, sealing, encapsulating, and...
Read More »Epoxy Compound bonds plastic and thermoplastic substrates.
Manufactured as 2-part, low-viscosity epoxy, flexible TRA-BOND 2170T bonds all types of plastic, including nylon, PVC, polyethylene, acrylic, lexan, polypropylene, kapton, and thermoplastic substrates. Epoxy can be room temperature- or heat-cured and exhibits lap shear strength of 2,500 psi. Also available in thixotropic formulation, material suits applications in automotive, medical, aerospace,...
Read More »Fiber Optic Adhesive has low-viscosity formulation.
Curable at room temperature or with heat, TRA-BOND 516H01 has ultimate Tg of 49Ã-
Read More »Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »