Polyvinyl Chloride (PVC)

Flexible PVC Compounds cut VOC emissions.

Designed for indoor construction applications, Flexible PVC Compounds are based on additive formulations designed for low VOC emissions, non-phthalate plasticizers, and bio-based plasticizers derived from renewable plant byproducts.Â- Compounds help manufacturers meet building codes for indoor air quality as well as comply with FloorScore® and UL Greenguard requirements. Products are...

Read More »
Epoxy Resin Adhesive cures at temperatures as low as 60°C.
Epoxies

Epoxy Resin Adhesive cures at temperatures as low as 60°C.

Suited for optical packaging applications where several temperature-sensitive materials are bound together, DELOMONOPOX LT204 epoxy resin minimizes thermal stress and warping. This multi-purpose, one-component adhesive can be processed within 48 hr at room temperature and adheres to various plastics as well as metals and FR4 composites. Dispensed through needles withÂ- diameter as small as...

Read More »
Radiopaque Compounds target thin wall catheters.
Tubes and Tubing

Radiopaque Compounds target thin wall catheters.

Reinforced with nanoparticles for optimized pushability of catheters, LoPro Plus™ Compounds allow for extrusion of single layer tubes with radiopacity and strength properties equivalent to conventional 2 layer tubes, in which each layer provides distinct properties. Compounds use particles that are less than 1 nmÂ- thick and up to 1,500 x thickness in length. When added to radiopaque...

Read More »
Adhesives

Prime Label Substrate Adhesive offers problem-free performance.

Running without buildup on converting or dispensing equipment, V-01 higher-shear, permanent acrylic adhesive maximizes performance for prime labeling applications. Product adheres to various container types, including low-surface energy HDPE, and offers open time for clean removability of misapplied labels. While compliant with FDA 175.105 for indirect food contact, adhesive also resists effects...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
High Temperature Adhesive suits applications to 2,300°F.
Adhesives

High Temperature Adhesive suits applications to 2,300°F.

Formulated for bonding and coating mica, glass-ceramics, and metals, Ceramabond™ 632 features dielectric strength of 150 V/mil at room temperature, coefficient of thermal expansion of 4.7 ppm/°F, and viscosity of 10,000–25,000 cp. Specific gravity is 1.45–1.50 g/cc and pH is 11.0. Applied using brush, syringe, or pneumatic dispenser,Â- mica-filled adhesive sets rapidly at room...

Read More »
Optically Clear, Condensation Curing Silicone Offers Superior Dielectric Properties
Epoxies

Optically Clear, Condensation Curing Silicone Offers Superior Dielectric Properties

Developed for potting and encapsulation applications where an addition cured silicone cannot be used, Master Bond MasterSil 152 is a two component, condensation curing system that only requires air for complete cross-linking. Unlike addition cured systems, there are no substrates that will inhibit the cure. This system fully cures at room temperature in 24-48 hours and has low exotherm. MasterSil...

Read More »
Adhesives

Silicone Sealant targets residential windows and doors.

Consisting of one-part RTV silicone material, Youjie™ Neutral Silicone Sealant cures upon contact with moisture in air to form flexible, silicone rubber seal. Product offers optimized adhesion to variety of construction materials and is suitable forÂ- use in wide range of window and door sealing and glazing applications. Available in translucent, black, gray, and white, sealant has neutral...

Read More »
Resins

High Stiffness PEEK offers low specific gravity of 1.35.

Providing 50% greater modulus/stiffness than standard neat PEEK grades, KetaSpire® KT-825 retains elongation and toughness that is comparable to that of neat PEEK resin for structural applications in transportation, electronics, semiconductor, and oil and gas. Dielectric strength per ASTM D149 at thickness ofÂ- 3.2 mm is 26.0 kV/mm (660 V/mil) as compared with 15.2...

Read More »
Roxtec's Unique Cable and Pipe Sealing Solutions for the Robotics Industry Saves Time and Provides an Advantage for End-Users Looking to Improve or Update Their Process
Sealing Equipment

Roxtec's Unique Cable and Pipe Sealing Solutions for the Robotics Industry Saves Time and Provides an Advantage for End-Users Looking to Improve or Update Their Process

Manufacturers of robotic process systems are moving from the production of tailor-made, customized designs and taking a new position to create more standardized and cost-effective solutions. A couple of examples include mass-production Robotic paint shops and Robotic Routing and Water-jet systems. Roxtec cable entry seals are an effective contribution to these new, more efficient designs, as...

Read More »
Pipe and Piping

Springfield Plastics, Inc. Receives Certification

Only Company in U.S. to Use 100% Virgin Resin Auburn, Illinois – Springfield Plastics, Inc. (SPI) is the only U.S. company to receive certification for use of 100% Virgin Resin in Drainage Pipe.Â-  Steve Baker, President of the company stated, We feel it is very important for our customers to know that we want to make this commitment to them year after year. That's why we have continued to...

Read More »

All Topics