New Valves Products

Proportional Valves create no sliding friction.

Proportional valves are offered with orifice sizes ranging from 0.032 to 0.625 in. They have 250 Hz frequency response, and some models are UL approved for hazardous locations. Performing well with high or low pressure drops, valves utilize isolation diaphragm that separates working fluid from coil and armature. Available valve material includes hard black anodized aluminum or stainless steel...

High-Pressure Valves provide positive leak-free shut-off.

Co-ax(R) valves are available for pressures up to 7,500 psi, actuation speeds of 30 msec, and in wide range of sizes, seal and construction materials. They handle high pressure applications, such as gas turbine fuel systems, cylinder filling, cryogenic pumps and vacuum furnace quench gas supply systems. Units come in 2/3- and 3/2-way versions, and in normally-opened or normally-closed...

Directional Valve diiverts or selects flow.

Balanced 3-way directional control valve diverts flow between 2 outlets. It is available in sizes for l/2 to 4 in. pipe, with pressure ratings from 150 to 10,000 psi. Applications include diverting positive displacement pump discharge without deadheading pump and pump unloading where 1 of 2 outlets can go to nozzles, and other can go back to reservoir. In reverse direction, it can be used to...

Thermostatic By-pass Valve permits zone control.

Three-way valve is designed for new or retrofit fin-tube baseboard installations that use non-electric thermostat. It comes with compression fittings for 3/4 in. copper tube, and is installed ahead of fin-tube in supply side, where radiation enters room. No. 320 liquid-filled thermostat provides quick response to temperature changes. From low freeze protection setting of 43-°F, it may be set in...

Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!

This white paper outlines the different types of screw head and drive designs.

Relief Valves are designed for gas or liquid applications.

High pressure relief valves protect systems or devices from over-pressure damage and failure. They are available in pressures from 1,000 to 10,000 psi, and feature stainless steel body, nylon seat and PTFE/EPDM seals. Inlet or thru ports and outlet/vent sizes are 1/4 in. FNPT. Valves have 0.70 in. dia orifice and Cv of 0.12. They are externally adjustable and can be mounted in line.

Solenoid Valve remains open while de-energized.

Direct acting EASY-NO normally-open solenoid valve closes when it is switched on. Thermoplastic valve offers water and dust-tight enclosure. With no wetted metals, valve can be used for corrosive or ultra-pure liquids, and can handle pressure, drain, or vacuum applications. It does not require line pressure to aid in closing or opening, and is available in 1/4 and 1/2 in. pipe sizes. Solenoid...

Miniature Valves meet IP 40 protection standards.

MH1 Miniature Valves feature 10mm grid design and are available for single sub-base, standard manifold, sub-D manifold, and PCB mounted manifold configurations. Series includes 10 lpm 3/2 direct-acting units, 3/2 normally open and normally closed, and 2/2 normally closed unit that provides 20 lpm flow for vacuum applications. Electrical connections include plug-in, horizontal or top connector....

Isolation Valves are ideal for low flow applications.

Model Series STV-K molded PEEK, solenoid operated, 2- and 3-way valves feature seat seal constructed of Perfluorelastomer providing chemical and abrasion resistance. Valves have 1.2mm internal orifice with 1/4-28 or M6 threaded port connections. They are rated for 12 or 24 Vdc continuous duty. Applications include automated chemistry, sample/reagent handling, solvent flush or rinse cycles, and...

Valve Manifold mounts up to 20 solenoid valves.

Compact aluminum solenoid valve manifold and subbase system lets normally open and normally closed valves be mounted simultaneously. Manifolds are available with 3/2 bottom ports or 3/2 end ports in M5, NPT, BSPP or BSPT threads. M5 size cylinder port can be ordered on either electrical or non-electrical side. Solenoid valves have glass-filled polyamide body, steel internal parts, thermoplastic...

ISO Valves have CSA/NRTL-C approval.

H ISO Series valves are offered in 3 sizes with Cv ratings of 1.55, 3.60, and 6.60. Two versions are available: 5599-1 non-plug-in valve (available in Automotive Common Wiring and Individual CNOMO Pilot connection styles), and 5599-2 Valve-to-Base plug-in version. Valves offer company's WCS spool system that compensates for seal wear, Internal/External Pilot Switch System, 1.8 Watt current draw,...

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.