New Valves Products

Control Valves suit corrosive environments.

Hi-Cyclic(R) directional control valves are constructed of corrosion resistant solid brass with stainless steel spool. They are available in direct ported or manifold mount body styles with 8 spool configurations in sizes from 1/8 through 1/2 in. NPT or SAE ports. With operating pressure of 3000 psi, valves have max length of 2 1/4 in. and max body height of 2 5/8 in. Unit provides a low...

Latching Valve is used where power is limited.

Magnetic latching valve is offered in 6, 12, and 24 Vdc, each drawing 10 W when energized. It consists of coil/magnet assembly encapsulated into single package with integral Form A DIN connection. Valve requires 100 msec of power application to latch or unlatch. Latching component is external to valve for adaptation to Series 20 or Series 80 valves with internal spring change.

Micro-Miniature Valves suit automated liquid handling equipment.

Inert solenoid operated isolation valves are 3/8 in. in diameter, allowing up to 4 manifold mounted valves to fit in 1 1/4 in. square space. Two-way, normally closed valves come in 3 body designs. Two incorporate rectangular body with 1/4-28 flat bottom ports on bottom or side. Manifold version has screw-in collar for easy assembly and exchange. Valves are constructed of PEEK or PPS with Teflon...

Check Valves are designed for installation in plastic.

CCPI Series Press-In Chek miniature cartridge style check valves are available in 5.5 and 8 mm diameters. Barbed design provides retention and prevents any bypass leakage around valve. Each valve is 100% tested for flow, leakage and cracking pressure. Press-In Chek valves are offered in cracking pressures from 0 to 72.5 psid and are compatible with most fluids.

Deploying Commercial Electronics in Rugged Environments

This white paper explores how Commercial Off-the-Shelf components can be used efficiently and cost-effectively in critical military applications.

Vacuum Generator includes 3-way valve.

Combination venturi vacuum generator and fully ported 3-way valve are contained in single modular plug-in body. Unit can be used as stand-alone device or as part of larger pneumatic circuit. Valve utilizes micro gap construction for very short stroke of balanced spool. Vacuum may be used for pick, place, and hold applications, or liquid drawback circuits.

Multiposition Valves feature preload design.

MW Type Multiposition Valves offer various flow configurations, port and fitting sizes, and actuation options. Rotor can be inspected or replaced without removing valve from actuator. Valves are available with 4 to 16 positions. Standard valve body material is stainless steel, however, valves may be ordered in Hastelloy C-22 or Nitronic 50.

Inlet Valves are available with straight or 90 deg bodies.

DSVP40 Series handles water pressures from 3 to 145 psi with internal flow regulation. Plastic bodied units offer inlet screen and chloramine resistant components. 3 models are available covering single and dual output versions. Inlet connections consist of either external 3/4 in. hose thread or internal 3/8 NPT brass fitting. Outlets utilize barb connection or 7/16-20 UNF thread. Other features...

Solenoid Valves operate from vacuum to 3,000 psig.

Atkomatic full-ported solenoid valves are available in 2-way, 2-position, normally closed and normally open; direct lift; semi-direct lift; and pilot piston operated. They are offered in 1/8 to 3 in. with connections for gases and liquids up to viscosity of 200 SUS. Ac and dc voltages are available, and most units come with Class H coils. Applications include chemical control, steam control, CO2...

Service Valve is sealed from outside elements.

Series 75B eliminates need for vaults and manholes by allowing direct burial of valve. Pinch sleeve completely isolates process material from operating mechanism. There are no cavities or seals that can clog or leak, and full-port opening minimizes plugging risk. Valve is protected by exterior coating to resist corrosion. It is available in ANSI sizes from 1 in. to 30 in., with stem extensions to...

Solenoid Valves provide tight seal.

Series 315/415 direct-acting solenoid valves have lip seal that uses air pressure within valve to assist spring in creating tight seal. This increases flow rate to 0.42 Cv, yet keeps body 19mm wide. Valves have 1/8 in. NPT ports, operating pressure range of 28 in. Hg to 125 psig, 5 W coil with 12 and 24 Vdc and 120 Vac voltage options, and NEMA 4 rating. 315 Series are multi-purpose 3-way valves,...

Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard

Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.