New Valves Products

Isolation Valves suit tight-fit applications.

Model KV-2 inert, manifold-mount, solenoid-operated, two-way, normally closed isolation valves measure 6 mm in width. They have internal volumes of 10 microL at inlet and outlet and virtually zero dead volume. KV-2 valves feature all inert, internal wetted parts that are diaphragm isolated from coil assembly and other metallic parts. They are suitable for low volume fluidic systems.

Diverter Valves handle pressures from 0 to 15 psig.

Diverter Valves are constructed with cast-iron body and end plates, with one-piece ductile iron rotor to hold critical dimensions and resist abrasion. Features include guarded actuators, ledge design that directs material, and triple protected bearings. Available control options include manual, air cylinder, air operated rotary actuators, and electric actuators. Diverter valves are available in...

Safety Valves are suitable for use in piping systems.

Figure 32, 42 and 42A Safety Valves feature stainless steel bases and discs, which provide long life and corrosion resistance. ASME Section I and VIII approved valves feature two-ring control for dependable pop action, seat tightness and repeatability. Cast bronze threaded valves with stainless steel base and disc are available in sizes ranging from 1/2 to 2-1/2 in. for pressures to 300 psi and...

Control Valve offers operating pressure up to 4,600 psi.

Duplomatic DS5 directional control valve is a high-performance, five-chamber, NFPA-Standard valve with flow capacity to 40 gpm. Standard features offer a variety of spool configurations including a tandem center model capable of P to T flows of 27 gpm at 2,000 psi. Soft shift option can reduce operating shock and minimize valve and system failure. Coils are standard with plugs to accept DIN 43650...

Choosing the Right Type of Chemical Gauge

Understanding the Differences in Chemical Gauges and Their Material Options

Proportional Valve controls pneumatic pressure.

Compact Model VP-22 provides variable pressure output in response to a 0 to 10 Vdc or 4 to 20 mA analog control signal. Integral pressure sensor provides closed-loop response. Direct plug-in pneumatic connections accept flexible tubing, eliminating need for pipe fittings. It has scalable pressure output, adjustable damping, low power consumption and LED status indication. Available in full-scale...

Ball Valves are used for clean-in-place applications.

Actuated Ball Valves are constructed of thermoplastics and feature trunnion design to withstand CIP processes. Shafts are strengthened with stainless steel rod. Teflon seats are energized with O-rings, and no metal parts are exposed to process liquid. Actuators are available with electric or pneumatic operation. Both are built from corrosion-resistant thermoplastics and are water and dust-tight...

2-Way Poppet Valves feature bubble tight shut-off.

SV72 Series 2-way inert balanced-poppet solenoid valves are designed to control corrosive fluids by isolating metal components from operating media. They employ two rolling diaphragms that act as isolating barriers and balancing areas. SV72 valves feature bubble tight shut-off and are mountable in any position. They offer pressure ratings of 100 psi with a Cv of 4.0. Valves are available with 115...

Miniature Pneumatic Valve System has manual overrides.

Moduflex(TM) Miniature Pneumatic Valve System can be assembled in dual 3/2, 4/2 and 4/3 configurations in one island to meet application requirements (10 mm to 100 mm actuator bore sizes). Tie-rod connections are used to add or delete valves, as well as change valve function, tubing size or piloting. Moduflex Valve System consists of 2 valve sizes: 0.38 Cv and 1.13 Cv. Both have 2.5 mm stroke, 14...

Control Valves are used with air, intert gas or vacuum.

MicroKing 4-Way Air Control Valves are direct acting units designed to control actuators, pilot other valves, and for blow off and dispensing applications. They are available as inline or subbase versions offering M5 or 1/8 in. ports with flow of 0.18 Cv and 4.8 W solenoid. Valves feature built-in flow controls and choice of IEM or Subbase Bar manifolds with side or bottom porting, as well as...

Soft Start Valves allow flow rates to 8.1 Cv.

PHS Series Solenoid Quick Dump Valves, available in 3/8 in. and 1/2 in. body sizes with flow rates up to 5.7 Cv, shut off incoming pressure while exhausting downstream pressure when solenoid is de-energized. PHSSA Series Auto Pilot Soft Start Valves, available in 3/8 in. body size with 1/4 in., 3/8 in., and 1/2 in. NPT ports, and flow rates up to 3.8 Cv, allow gradual filling of downstream...

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.