New Valves Products

Inert Diaphragm Valve handles aggressive fluids.

Three-way IDV solenoid-operated diaphragm isolation valve works with fluids found in medical equipment, water purification and clinical chemistry industries. Materials of all surfaces in flow path are inert and impervious to many aggressive fluids. Valve is typically used in waste circuits where valve must tolerate high contaminant levels. Valve is rated 35 psi with Cv of 0.22 and is available in...

Through-port Valves control and shut off flow.

Stargate-O-Port valves work with ultrasonic positioner to control flow. Different port and orifice shapes allow selecting certain characteristics of flow cross section and blade position. Valves also serve as line blind in maintenance situations, to take out pipes and set blank flanges for safety. They have tight class VI shut-off which allows operators to close valve, inset locking pin and pad...

Dispense Valve features drip-free cutoff.

Pneumatically operated 752V-UHSS dispense valve has no seals or O-rings to wear out. Amount dispensed is determined by combination of fluid flow rate and valve open time. Adjustable stroke control allows flow rate to be fine tuned, while open time is regulated in increments from 0.01 to 0.001 seconds with EFD VALVEMATE(TM) controller. Applications include automated assembly machines, XYZ tables,...

Molded High-Flow 2-Way Valve uses no O-ring end fittings.

Created for use in high purity/corrosive chemical applications, injection-molded FuronÃ-® In-Line-1000 Valve provides true 1 in. orifice and angled actuator that promotes maximum flow (Cv-15). It is offered in pneumatically or manually actuated versions, and has maximum operating pressure and maximum back pressure ratings of 100 psi. Fluid temperature ranges from 40Ã-

Lanyards & Lanyard Assemblies - Attach and Secure Your Components

To learn more about the different types of lanyard options available or which to select for your specific application, download our product guide.

Multi-Port Check Valves operate in any orientation.

Used to control flow in vacuum or pressure lines, check valve permits flow in one direction only and prevents flow in opposite direction. Valves are manufactured with nylon bodies and fluorosilicone seals, operate in any orientation, and can be used for liquid service. Standard barbs are available in 3/16, 5/16 and 1/4 in. ID. Other barb sizes as well as thread or bulkhead fittings can be adapted...

Diaphragm Valves withstand corrosive environments.

All-plastic diaphragm valves for 3, 4 and 6 in. pipelines are suitable for control of liquids, gases, and slurries in both on/off and modulating services. Each has handwheel that opens or closes valve with minimal effort. Plastic valves will never fail, jam, stick, or freeze in position because of rust or corrosion; will never contaminate sensitive process fluids; and never need to be painted or...

Plastic Valves assemble easily into manifolds.

RDVM-1000 injection molded, Furon rolling diaphragm two-way valve and SMDVM-1000 1 in. self manifolding distribution valve have 100% PFA HP and Virgin PTFE wetted flow paths, visual position indicators, no exposed metallics, leak detection ports,and quick-release, non-metallic, eight-position mounting base. Both are available in pneumatically or manually actuated versions. Universal non-gender...

Valve Controller Trio satisfies various requirements.

IN-Series interface units include three controllers: IN-23 Y 3 Proportiontal Controller uses control action that progressively closes valve. IN-VCC valve current controller interfaces between process loops and control valves; it accepts 4-20mA control signal and uses this to regulate current applied to valve. Phasecut controls Staefa valves. It modulates valve using 0-20V phase-chopped output...

Plastic Valve is stronger than UL requirements.

Series 40 valve is molded from thermoplastic, has molded-in mounting bracket, survives 2,000 psi hydrostatic test, and has 300 psi maximum pressure rating. Suitable for pneumatic applications, it is available in all standard voltages including 24 VAC transformer power. Options include bracketless version, and full porting for three-way version. Valve is over molded with electrically and thermally...

Lubrication System is designed for stamping presses.

MicroCoat Lubrication System ensures that stock is always coated with even film of oil. It uses precision spray valves and LVLP (Low Volume Low Pressure) air to apply consistent coat of oil without dry spots, dripping or waste. Valve operation is regulated with pneumatically operated controller. Individual flow controls allow each valve's output to be adjusted independently and provide control...

Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard

Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.