New Valves Products

Inline Valves mount on manifold.

B4, B7 and B8 pneumatic valves mount on IEM bar manifold and connect via Valvetronic 110 collective wiring system. B4 has 1/4 in. ports and 1.22 Cv flow rate; B7 has 1/2 in. ports and 5.9 Cv flow rate; and B8 has 3/4 in. ports and 7.0 Cv. Valves are available with solenoid or remote pilots. Options and accessories include 3/8 in. Prestolok fittings and intrinsically safe and hazardous duty...

Relief Valves have relief ranges from 0 to 100 PSIG.

P-Series Diaphragm-type Relief Valves are available in 2 models that offer push-pull locking knob. P130 has lightweight aluminum body and 1/4 in. male pipe threads. P134 has brass body, captured exhaust, and is of inline-type with 3 inlet ports (two 1/8 in. and one 1/4 in. female pipe threads) and one outlet port (1/4 in. female pipe threads). Valves are rated for 300 PSIG maximum inlet pressure...

Low-Flow Regulator handles high pressures.

Model JHR J Series valve handles working pressures as high as 3600 psi and operating temperatures to 575Ã-

Solenoid Valves come with stainless steel bodies.

Series 58 molded solenoid valves are available in 2-way and 3-way versions. Stud mount uses 10/32 in. stud as orifice connection and annular groove as cavity connection. Connections are separated and sealed with O-rings. Other body style uses 10/32 female ports for both cavity and orifice connections. Applications include portable medical devices, analyzers and portable test equipment.

How to Effectively and Efficiently Clean Heat Exchangers, Part I

An introduction to a three part series about the importance, benefits, and methods of cleaning heat exchangers.

Check Valve stops impure back flow.

Non-metallic, self-sealing Bio-Chek(TM) in-line check valve has inert flow path, making it suitable for stopping back flow in high purity, low pressure fluid transfer applications. Valve's smooth flow path minimizes shear and turbulence, and provides flow rate equivalent to 0.030 in. orifices. Cracking pressure is less than 3.5 psi. Valve checks against backflow pressures to 100 psi, and is...

Poppet Valves are solenoid operated.

Bronze StarÃ-® direct solenoid-operated 2-way poppet valves employ pulse width modulated solenoid electronics to extend solenoid life and reduce power usage. Constructed of non-corrosive bronze, brass, and stainless steel, valves are designed to operate from 29 in. mg vacuum to 500 psi air. Valves are available in NPT pipe sizes ranging from 1/4 to 2 in. Seal options are available to handle...

Pinch Valves offer positive tube retention.

Available in either 2-way normally open or normally closed configurations with 12 or 24 VDC coils, Series EPK large-bore, solenoid-operated pinch valves are designed for use with 10 and 15 mm silicone tubing. Pressure ratings are .5 Bar (10mm ID) and .2 Bar (15mm ID). They are suitable for on/off fluid control applications or where replacement of wetted materials is advantageous. They feature...

Dispense Valve offers twist apart design.

DSVP12 gravity fed valve dispenses water and water based media from non-pressurized tanks. Conical diaphragm uses surface wipe action to keep valve seat free of lime and mineral buildup. Unit features Class F molded coils and internal rectified AC coil that provides noise-free AC operation. Variety of diaphragm and body materials are available allowing valve to handle hot and cold as well as...

Butterfly Valves resist erosion and abrasion.

Tufline high performance butterfly valves feature axially pliant seals. They include 2 components: outer segment of chemically inert, glass-reinforced PTFE; and deformation-resistant, memory-core membrane. Capable of handling virtually any material, these butterfly valves are available in soft-seated, fire-tested and high-temperature models. Pressure ratings include ANSI class 150, 300 and 600 in...

Multiple Stage Valve is suitable for vacuum systems.

Compact ILP two-stage valve includes pneumatically-actuated poppet valve and bypass valve in single unit that fits into tight space constraints found in vacuum applications, such as loadlock and transfer chambers in semiconductor or optical processing. Soft start process reduces turbulent flow during initial vacuum system evacuation, for less product contamination and damage. Heater jacket is...

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.