Oscillators

Ultra Wideband VCO suits satellite communication applications.
Oscillators

Ultra Wideband VCO suits satellite communication applications.

Operating from 2,700–5,400 MHz with tuning voltage range of 0–24 Vdc, Model V600ME31-LF features typical phase noise of -107 dBc/Hz at 100 kHz offset and average tuning sensitivity of 140 MHz/V. Octave tuning VCO delivers typical output power of 7 dBm into 50 Ω load while operating from 5 Vdc supply and drawing 25 mA. Housed in 0.5 x 0.5 x 0.16 in. package, oscillator operates from -40 to...

Read More »
Dielectric Resonator SMT VCO serves test and measurement market.
Oscillators

Dielectric Resonator SMT VCO serves test and measurement market.

Supplied in 0.91 in. x 0.91 in. x 0.45 in. SMT SDRO package, DRO8000A covers 8,000 MHz withinÂ- 0–12 Vdc tuning voltage range. VCO utilizes dielectric resonator technology and features typical phase noise of -103 dBc/Hz @ 10 kHz offset and average tuning sensitivity of 1 MHz/V. Designed to deliver typical output power of 3 dBm into 50Ã‚Â Ω load while operating...

Read More »
Oscillators

Ultra Low Phase Noise VCXO comes in range of frequency options.

Available at specified frequencies from 50–125 MHz, V1A Ultra-Low Noise series exhibits typical phase noise performance (dBc/Hz)Â- of -86 @10 Hz, -118 @ 100 Hz, -143 @ 1 KHz, -157 @ 10 KHz, -164 @ 100 KHz, and -167 at 1MHz. VCXO comes in 9 x 14 mm, 4-pad package and can be customized for specific operating temperature and frequency vs. temperature stability. Areas of...

Read More »
Coaxial Resonator Oscillator includes frequency doubler.
Oscillators

Coaxial Resonator Oscillator includes frequency doubler.

Operating from 5,685–5,780 MHz with tuning voltage range of 0.3–4.7 Vdc, Model CVCO55CXT-5685-5780 features typical phase noise of -102 dBc/Hz at 10 KHz offset. Coaxial-based VCO exhibits output power of 0.0 dBm into 50 Ω load with supply of +5.0 Vdc and current consumption of 25 mA max. Housed in 0.5 x 0.5 in. package, USA-made device minimizes Pushing and Pulling to 1.5 MHz/V and 0.5 MHz,...

Read More »
Oscillators

SMD Crystals and Oscillators measure 2.5 x 2.0 mm.

Supporting -10 to +70°C or -40 to +85°C ranges, ultra light crystals offer precision with frequencies from 15.000–48.000 MHz in fundamental mode. Ultra low phase noise oscillators, designed to minimizeÂ- power consumption with availability of Tri-State Function, operate from -40 to +85°C and support frequencies from 0.750–110.000 MHz in fundamental or Third OT...

Read More »
Master Crystal Oscillator targets advanced space applications.
Oscillators

Master Crystal Oscillator targets advanced space applications.

Housed in 50 x 50 x 30 mm package weighing 100 g, LNMO low phase noise master crystal oscillator features phase noise of -110 dBc/Hz at 1 Hz from 10 MHz carrier. UnitÂ- has hardened radiation rates less than 100 kRad and offers high frequency stability of ±1E-9 over -30 to +70°C temperature range. With power consumption of 1.5 W, oscillator is suited for GNSS receivers, up/down...

Read More »
Signal Receivers

GPS/GNSS Receiver and OCXO offers precision timing.

Featuring 76 x 20 x 38Â- mm footprint, GXClok™-500 integrates 50-channel GPS/GNSS receiver with crystal oscillator module. Device features low phase noise of -95 dBc/Hz at 1 Hz from 10 MHz carrier and high frequency stability of ±3E-10 over temperature range of -40 to +85°C. Consuming 3 W nominal, GXClok-500 provides precision timing for satcom, telecom, navigation,...

Read More »
Low Input Current Optocouplers provide phototransistor output.
Electrical Isolators

Low Input Current Optocouplers provide phototransistor output.

Housed in SSOP-4 mini-flat package, Series VOS618A and VOS617A feature DC input currentsÂ- of 1 mA and 5 mA, respectively. Units have GaAs infrared emitting diode, which is optically coupled to silicon planar phototransistor detector. SSOP-4 package provides 3,750 Vrms isolation voltage rating, half lead pitch of 1.27 mm, and creepage/clearance distance of ≥5 mm. Offering CRT...

Read More »
Coaxial Resonator Oscillator provides frequency doubling.
Oscillators

Coaxial Resonator Oscillator provides frequency doubling.

Consisting of coaxial-based VCO with internal frequency doubler, Model CVCO55CXT-5270-5375 operates from 5,270–5,375 MHz with tuning voltage of 0.3–4.7 Vdc. Oscillator features typical phase noise of -102 dBc/Hz at 10 KHz offset. Unit exhibits output power of 0.0 dBm into 50 Ω load with supply of +5.0 Vdc and current consumption of 30 mA max. Housed in 0.5 x 0.5 in. package, CRO is suited...

Read More »
Low Phase Noise TCXO features 4.0-54.0 MHz frequency range.
Oscillators

Low Phase Noise TCXO features 4.0-54.0 MHz frequency range.

Housed in miniature 3.2 x 2.5 x 1.0 mm ceramic package, Model IQXT-60 features typical phase noise figures of -63 dBc/Hz at 10 Hz and -161 dBc/Hz at 100 kHz, coupled with low current consumption of 5.0 mA. Unit provides frequency stability of ±2.5 ppm over operating temperature range of -30 to +75°C and frequency tolerance of ±0.5 ppm. With HCMOS output capable of driving 15 pF...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers