Oscillators

Surface-Mount 100 MHz OCXO comes in 14 x 21 x 6.8 mm package.
Oscillators

Surface-Mount 100 MHz OCXO comes in 14 x 21 x 6.8 mm package.

Available in 5 V,Â- O-CS8-0X Series offers close-in phase noise of -135 dBc/Hz and -180 dBc/Hz phase noise on floor. Other features include SC-cut crystal, frequency range of 80–120 MHz, and Sine wave +17 dBm output. This OCXO exhibits stabilities of ±50 ppb with temperatures of -55 to +85°C and is suited for instrumentation, radar, high-end synthesizers,...

Read More »
Dielectric Resonator VCO targets test and measurement market.
Oscillators

Dielectric Resonator VCO targets test and measurement market.

Designed to cover 12,600 MHz with tuning voltage range of 0–12 Vdc, Model DRO12600A features low phase noise of -102 dBc/Hz at 10 kHz offset while operating off 5 Vdc supply and drawing 23 mA of current. Device delivers typical output power of 0±3 dBm into 50 Ω load over industrial temperature range of -40 to 85°C. Housed in 0.91 x 0.91 x 0.51 in. surface mount SDRO package, VCO...

Read More »
Low Phase Noise VCO targets satcom market.
Oscillators

Low Phase Noise VCO targets satcom market.

Designed to cover 1,320 MHz with tuning voltage range of 0.5–4.5 Vdc, Model CRO1320A-LF features low phase noise of -120 dBc/Hz at 10 kHz offset while operating from 5 Vdc supply and drawing 29 mA of current. Device provides output power ofÂ- Ã‚ 0±3 dBm into 50 Ω load over extended commercial temperature range of -40 to 85°C. Housed in 0.5 x 0.5 x 0.22 in. MINI-16-SM...

Read More »
Oscillators

Military Oscillators withstand 100,000 g shock.

Designed around hermetically sealed crystal and CMOS-compatible IC, HGXO Series survives shock levels up to 100,000 g and vibration levels of 20 g at 10-2,000 Hz swept sine in accordance with MIL-STD-202G. Surface mount units come in supply voltages of 5.0, 3.3, 3.0, 2.5, and 1.8 V with output frequencies from 460 kHz to 50 MHz and 15 pF HCMOS drive capability. Housed in 7 x 5 mm ceramic package...

Read More »
Oscillators

Customizable VCOs offer frequencies from 50 MHz to 6 GHz.

Housed in surface mount 12.7 x 12.7 x 4.0 mm package, IVCO-100 Series delivers linear frequency tuning with immunity to voltage supply and output load variations. Output is typically 5.0 dBm into 50 Ω. Model IVCO-110 is optimized for performance from 825–930 MHz while Model IVCO-120 offers -90 dBc/Hz phase noise at 10 KHz offset from 4,400–4,800 MHz. Pushing design limits to 6 GHz, Model...

Read More »
Oscillators

OCXOs offer customer-specified output frequency.

Housed in modular, sealed package with temperature stability, Poseidon Series OCXOs provide ultra-low phase noise performance under static and dynamic vibration prone environments. Units support customer-specified frequencies between 30 and 130 MHz and can be provided with mechanical frequency adjustment for up to ±3 ppm. With acceleration sensitivity of less than 2e-11/g and optimal noise...

Read More »
Oscillators

OCXO offers phase noise performance down to -172 dBc/Hz.

Available at any frequency from 80–130 MHz, IQOV-200 Series delivers phase noise performance of -172 dBc/Hz at 100 kHz offset and -160 dBc/Hz at 1 kHz offset based on nominal oscillating frequency of 100 MHz. Oven Controlled Crystal Oscillator nominally operates from 12 V power supply and consumes 1 W of power at steady state. Drive capability is quoted at +6 dBm into 50 Ω. Housed in 36 x 27...

Read More »
RoHS-Compliant C-Band VCO features linear tuning, low noise.
Oscillators

RoHS-Compliant C-Band VCO features linear tuning, low noise.

Operating at 5,120–6,120 MHz withÂ- tuning voltage range of 0–22 Vdc, V950ME36-LF provides better than 1.1:1 tuning linearity and features spectrally clean signal of -87 dBc/Hz @ 100 kHz offset as well as 51 MHz/V typ tuning sensitivity. Octave tuning VCO, designed to deliver 0 dBm of output power into 50 Ω load while operating off 5 Vdc...

Read More »
Miniaturized L-Band VCO features low phase noise.
Oscillators

Miniaturized L-Band VCO features low phase noise.

Operating from 1,250–1,400 MHzÂ- with tuning voltage range of 0.5–4.5 Vdc, USSP1325-LF features phase noise of -100 dBc/Hz @ 10 kHz offset while operating from 5 Vdc supply and drawing 25 mA typ. RoHS-compliant VCO provides output power of 3±3 dBm into 50 Ω load while operating over -40 to +85°C range. Supplied in 0.2 in. x 0.2 in. x 0.06 in....

Read More »
VCO features phase noise of -117 dBc/Hz at 10 kHz.
Oscillators

VCO features phase noise of -117 dBc/Hz at 10 kHz.

Designed to operate from 390–440 MHz with tuning voltage of 0.5–5 Vdc, Model CRO0419A-LF features typical tuning sensitivity of 17 MHz/V. RoHS-compliant device provides output power of -4.0 dBm into 50 Ω load while operating off 5 Vdc supply and drawing 40 mA over temperature range of -30 to 70°C. Housed in MINI-16-SM package measuring 0.5 x 0.5 x 0.22 in., oscillator features typical...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers