YH1421 Oven Controlled Oscillator features Electronic Frequency Control.
Featuring low phase noise of 160 dBc/Hz noise floor, YH1421 Oven Controlled Oscillator maintains good holdover and stability for wireless communications and data, including 5G. Housed in compact 0.8” x 0.5”, low profile, DIP package, units are available from 10 MHz to 120 MHz, with +3 dBm sinewave output into 50Ω. Stored at -55 to +95°C temperature, device uses +5 or +3.3 VDC supply.
Read More »
T1250 TCXO features Clipped Sinewave Output.
Designed for low input power applications such as mobile communication and instrumentation, T1250 Temperature Compensated Crystal Oscillator features compact, 9 x 14 mm SMT package. Available in 10 to 50 MHz range, unit provides temperature stability down to ±30 ppB over -40 to +85°C. Stored at -55 to +95°C temperature, device uses +3..3 to +5.0 VDC supply and maintains acceleration...
Read More »
EQXO-2000BM Crystal Oscillators feature tight frequency calibration tolerance.
Designed for standard 5.0 VDC supply voltage and standard output is CMOS, 50 pF/10 TTL loads, EQXO-2000BM Crystal Oscillators are available in frequency ranging from 30 kHz to 70 MHz with a calibration tolerance of ±10 to ±25 ppm at 25°C. Offering frequency stability of ±100 or ±50 ppm over the full military temperature range (-55 to +125°C), units are ideal for upper atmosphere, aerospace,...
Read More »
High-Frequency Programmable TCXO offers LVCMOS output.
Supplied in 3.2 x 2.5 mm package, TXF temperature compensated crystal oscillator (TCXO) offers LVCMOS, LVPECL, and LVDS output with frequency range of 10 MHz to 1.4 GHz. Standard temperature stability is ±2.5 ppm over -40 to +85°C range, and supply voltage choices include +2.5 or +3.3 V. Consuming 44 mA (LVPECL 622.080 MHz at 3.3 V), TCXO features integrated phase jitter...
Read More »
Corrosive/Ultrapure Fluid Heat Exchanger Coils - Choosing the Right Strategy
Check out this white paper to learn which heat exchanger types are the best for high temperature performance in chemically aggressive applications.
Read More »Precision MEMS Oscillators aid telecom, networking timing market.
Designed to solve problems in telecom and networking equipment, Elite Platform™ Super-TCXOs™ and oscillators bolster communications equipment performance, reliability, and QoS even when environmental stressors are present. These precision devices are based on DualMEMS™ architecture with TurboCompensation™, which further includes TempFlat MEMS™, 100% accurate thermal coupling, and...
Read More »MEMS Oscillators provide reliability, stability from -40 to +85°C.
Comprised of Micro-Electro-Mechanical Systems (MEMS) oscillators, DSC6000 series offers 2 KHz to 100 MHz range and is suitedÂ- as clock references in such small, battery-powered devices as wearables and IoT devices. Products come in 4-pin DFN packages, ranging from 1.6 x 1.2 mm to 7 x 5 mm, and also meet AEC-Q100 mechanical durability and reliability requirements. Consuming 1.3 mA...
Read More »
Time and Frequency System features internal GPS receiver.
Housed in ruggedized enclosure, tactical 8836 Series integrates ground-based GPS receiver module, rubidium oscillator, time and frequency signal generation, and control/status circuitry. Standard outputs include 1 PPS, low noise 10 MHz Network Time Protocol, and two IRIG B outputs over multi-mode fiber. When tracking GPS with TFOM of 3 or better, discipline algorithm steers internal oscillator...
Read More »
Ultra High Frequency TCXO generates 60-650 MHz.
Housed in ULTRA 3225 SMD case measuring 3.0 x 2.5 mm, ULTRA TX832-D3 generates high frequency range of 60–650 MHz with supply voltage of 2.5 or 3.3 V at frequency stability of 2.5 ppm over temperature range of -40 to +85°C. Device features low RMS jitter of 650 fs max within bandwidth of 12 kHz to 20 MHz. With typical frequencies of 78.125, 156.250, and 312.5 MHz, TCXO is suited for...
Read More »Frequency Reference provides 10 MHz output.
With 8 outputs, MtRF-5610 GPS Disciplined 10 MHz Frequency Reference eliminates need for separate frequency source and RF distribution unit. Along with 10 MHz outputs, time information is also available via serial output, which supports 1 PPS mode and NMEA-0183. Unit's 1 PPS signal is accurate to ±35 ns to UTC RMS, and 10 MHz output has noise floor of -155 dBc. Available in 8.66 x 6.50...
Read More »
OCXO offers tight temperature stability.
Measuring 9 x 14 mm, OX2114-D3 Oven Controlled Crystal Oscillator provides temperature stability of ±5 ppb over operating temperature range of -40 to +85°C. Standard nominal frequencies are 10 MHz and 20 MHz with supply voltage of 3.3 V at 300 mA steady state. Featuring low current consumption of 750 mA during warm-up,Â- RoHS-compliant oscillator is suited for applications such...
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
