Oscillators

Tight Stability Clock Oscillators come in two package sizes.
Oscillators

Tight Stability Clock Oscillators come in two package sizes.

Respectively supplied in 2.5 x 2.0 mm and 3.2 x 2.5 mm ceramic packages, IQXO-445 series and IQXO-430 series deliver frequency stabilities as low as ±10 ppm over full -40 to +85°C range. Both series are available over 4–54 MHz range, consume 3.1 mA at 40 MHz, and offer phase noise performance of -145 dBc/Hz at 10 kHz offset. Output is CMOS-compatible with up to 15 pF load, and both...

Read More »
Voltage Controlled Oscillator delivers +5.5 dBm output.
Oscillators

Voltage Controlled Oscillator delivers +5.5 dBm output.

Housed in industry-standard 0.5 x 0.5 in. SMD package, Model CVCO55BE-1000-2000 operates from 1,000–2,000 MHz with control voltage range of 1.0~20 V, and features typical phase noise of -95 dBc/Hz at 10 KHz offset. Input voltage is 10 V with maximum current consumption of 25 mA. Pulling and Pushing are minimized to 7.5 MHz and 2.5 MHz/V, respectively, and second harmonic suppression is -10 dBc...

Read More »
OCXO delivers ±0.2 ppb frequency stability.
Oscillators

OCXO delivers ±0.2 ppb frequency stability.

Covering 10–40 MHz range, IQOV-164 series comes in 5-pin euro package measuring 36 x 27 x 13.5 mm and delivers ±0.2 ppb frequency stability from -20 to +70°C or ±0.5 ppb from -30 to +75°C. Frequencies are available up to 100 MHz with stability of ±10 ppb from -30 to +75°C. Consuming 7.0 W max during 3 min warm up, series operates from 3.3 V supply and offers...

Read More »
Oscillators

New PLLs Deliver Widest Frequency Range Coverage and Lowest VCO Phase Noise in a Single Device

PLLs cover frequencies from 55 MHz to 14 GHz and deliver breakthrough noise performance for macro-cell base stations, point-to-point systems, radar, and test and measurement applications. IMS2014 TAMPA, Fla.Â- – INTERNATIONAL MICROWAVE SYMPOSIUM - Analog Devices, Inc. (NASDAQ: ADI) introduced today three new phase-locked loop (PLL) devices one of which features the industry's widest...

Read More »
Oscillators

Fractional-N PLL features advanced frequency modulation.

Offered in industrial and automotive grades, PLLatinum® LMX2492 supports 200 MHz phase frequency detector, 5 V charge pump supply, and operating frequency of 500 MHz to 14 GHz. Low PLL phase noise of -227 dBc/Hz provides RF front ends with low-noise local oscillator for optimized receiver sensitivity. Flexible frequency and phase modulation, including FSK, PSK, and configurable piecewise...

Read More »
Oscillators

Voltage Controlled Oscillator operates from 3,274-3,280 MHz.

Housed in 0.5 x 0.5 in. SMD package withÂ- typical output power of +5 dBm, Model CVCO55CC-3274-3280 features control voltage range of 0.3~4.7 V and typical phase noise of -115 dBc/Hz at 10 KHz offset. Input voltage is 8 V with max current consumption of 30 A, and Pulling and Pushing are minimized to 3 MHz and 0.1 MHz/V, respectively. Typical applications include digital radio...

Read More »
Oscillators

TCVCXO delivers ±0.14 ppm stability in 5 x 3.2 mm package.

Powered from 3.3 V supply, IQXT-210 Series offers frequency stabilities down to ±0.14 ppm over industrial temperature range of -40 to 85°C. Units typically draw 12 mA, dependent upon frequency, which can be specified between 10–50 MHz. Output can be specified as either HCMOS, 15 pF load, or Clipped Sine, into 10 kΩ load. In addition, oscillator can be specified to include various...

Read More »
Miniature OCXO delivers ±5 ppb stability.
Oscillators

Miniature OCXO delivers ±5 ppb stability.

Supplied in 14 x 9.0 x 6.5 mm package, IQOV-162 series is available inÂ- 10–100 MHz frequency range and provides frequency stability down to ±5 ppb from -40 to +85°C. OCXO operates from 3.3 V supply, consumes 600 mA during warm up, and takes

Read More »
OCXOs feature frequency range from 10-40 MHz.
Oscillators

OCXOs feature frequency range from 10-40 MHz.

Measuring 9 x 14 mm, Series OX1000 features temperature stability as low as 10 ppb from -40 to +85°C and phase noise down to -150 dBc/Hz at 100 KHz from carrier. Outputs are available in both clipped sine wave and HCMOS technologies. Units achieve accurateÂ- frequency stability with SC cut crystal, and meet wander requirements of GR-1244. With power supply voltage of 3.3 Vdc,...

Read More »
Voltage Controlled Oscillator operates at 2,950 MHz.
Oscillators

Voltage Controlled Oscillator operates at 2,950 MHz.

WithÂ- 0.5–4.5 V control voltage range, CVCO55CC-2950-2950 features typ phase noise of -115 dBc/Hz @ 10 KHz offset and typ output power of +7 dBm. SMD package measures 0.5 x 0.5 in., input voltage is 8 V, and max current consumption is 30 mA. Respectively, pulling and pushing are minimized to 3 MHz and 0.1 MHz/V. Second harmonic suppression is -15 dBc typ. Uses include such...

Read More »

All Topics