Oscillators

SMD True SineWave XO offers low phase noise floor performance.
Oscillators

SMD True SineWave XO offers low phase noise floor performance.

Providing -170 dBc/Hz noise floor at 1 MHz offset, CCSS-945Â- True SineWave Clock Oscillator (XO) generates frequencies from 10–125 MHz with output level of +5 dBm min into 50 Ω and harmonics lower than -25 dBc. Close-in phase noise performance is -105 dBc/Hz typ at 10 Hz offset. Supplied in 9 x 14 mm SMD package, product is engineered to MIL-STD-883 and MIL-STD-202...

Read More »
Voltage Controlled Oscillator provides +3 dBm output power.
Oscillators

Voltage Controlled Oscillator provides +3 dBm output power.

Operating from 902–928 MHz with control voltage range of 0.5~3.5 V, Model CVCO25CL-0902-0928 features typical phase noise of -108 dBc/Hz at 10 KHz offset. Input voltage is 3 V with max current consumption of 15 mA, and pulling and pushing are minimized to 0.5 MHz and 0.5 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, USA-made VCO is suited for digital radio equipment, fixed wireless...

Read More »
Oscillators

Future Electronics Offers Availability of the XRCGB Series of Hybrid Crystal Resonator from Murata

Montreal, Quebec - Future Electronics, a global leading distributor of electronic components, announces immediate availability of the XRCGB Series of Hybrid Crystal Resonator from Murata. Murata's HCR XRCGB Series is a 100% crystal timing device, in a new hybrid package available in specific frequencies from 24MHz to 48MHz. The goal of the Murata HCR is low cost in a small 2016 package, targeting...

Read More »
Miniature Clock Oscillator can drive 15 pF load.
Oscillators

Miniature Clock Oscillator can drive 15 pF load.

Measuring 2.0 x 1.6 x 0.65 mm, Model CO2016 is available in 3 power supply voltages of 1.8 V ±5%, 2.5 V ±5%, and 3.3 V ±5%. Unit operates from -10 to +70°C and offers frequency stability of 25, 30, 50, and 100 ppm. Featuring built-in enable/disable function, oscillator is suited for microprocessor and DSP clocks, alarms, embedded computing devices, personal digital...

Read More »
Clocks

Ruggedized Rubidium Clock performs in high EMI environments.

Supplied in EMI-shielded package, SRO-5680 utilizes SmarTiming+® technology to intelligently synchronize, discipline, and control any Stratum-1 reference, such as GPS/GNSS, Cesium, Hydrogen Maser, and T1/E1, at 1 ns resolution. This GPS/GNSS synchronized Rubidium oscillator isolates precision timing and frequency signals onÂ- 3 SMA connectors: 1 PPS reference input, 1 PPS output, and...

Read More »
Oscillators

OCXO is optimized for low phase noise performance.

Supplied 36 x 27 mm Eurostyle package, IQOV-200F runs off 12 V supply and delivers optimized phase noise performance with close-in measurement of -130 dBc @ 100 Hz and noise floor better than -180 dBc across 80–130 MHz range. Frequency stability isÂ- Ã‚±50 ppb over -20 to +70°C operating range, and sinewave output is 13 dBm min. Consuming 150 mA max at 25°C and 350...

Read More »
Clocks

Hybrid Crystal Timing Device targets automotive applications.

Measuring 2.5 x 2.0 mm, XRC Series is available with nominal frequencies of 12–24 MHz, providingÂ- highly accurate clock for automotive electronic control units. Typically used for in-vehicle networks such as CAN and FlexRay, series incorporates crystal element within ceramic resonator package structure. Frequency tolerance is typically ±100 ppm at 25°C, and operating...

Read More »
Oscillators

Miniature VCTCXO IC exhibits frequency stability.

Delivered as die or in QFN-10, 3 x 3 package, MAS6279 is primarily intended for stable TCXO and VCTCXO modules. Use ofÂ- fully analog compensation method makes it possible to achieve ±0.14 ppm or better frequency stability. Power consumption is 1.3 mA typ, minimum operating temperature is -40°C, and phase noise is -136 dBc/Hz at 1 kHz. Programmable divider...

Read More »
Voltage Controlled Oscillator tunes from 3-6 GHz.
Oscillators

Voltage Controlled Oscillator tunes from 3-6 GHz.

Suited for satellite communication applications, Model V600ME45-LF operates from 3,000–6,000 MHz with tuning voltage range of 0–24 Vdc. Octave tuning VCO features typical phase noise of -103 dBc/Hz at 100 kHz offset and average tuning sensitivity of 147 MHz/V. Housed in MINI-16-LOW package measuring 0.5 x 0.5 x 0.16 in., RoHS-compliant device delivers typical output power of 6 dBm into 50 Ω...

Read More »
Pushbutton Switches

Agilent Technologies to Demonstrate Leading-Edge Test Solutions for Memory, NVM Express, PCI Express, and SuperSpeed USB Applications at Intel Developer Forum

SANTA CLARA, Calif. – Agilent Technologies Inc. (NYSE: A) today announced that it will demonstrate its latest test solutions that meet the challenges of current and next-generation digital designs in memory, NVM Express, PCI Express, and SuperSpeed USB technology at the Intel Developer Forum, Sept. 10-12, at the Moscone Convention Center in San Francisco. Memory Debug and Validation Agilent...

Read More »

All Topics