Oscillators

Voltage Controlled Oscillator features ultra low phase noise.
Oscillators

Voltage Controlled Oscillator features ultra low phase noise.

Operating from 750–790 MHz within tuning voltage range of 0–2.5 Vdc, Model SMV0770A-LF features phase noise performance of -106 dBc/HzÂ- at 10 kHz offset and covers frequency range with average sensitivity of 44 MHz/V. UHF-band unit delivers 1±2 dBm of output power into 50 Ω load while operating over industrial temperature range of -40 to 85°C. Housed in SUB-L package...

Read More »
Voltage Controlled Oscillator draws just 13 mA of current.
Oscillators

Voltage Controlled Oscillator draws just 13 mA of current.

Operating from 3,050–3,550 MHz within tuning voltage range of 0–5 Vdc, Model USSP3300-LF features phase noise of -105 dBc/HzÂ- at 100 kHz offset while operating off 3 Vdc supply. S-band unit provides output power of 1±3 dBm into 50 Ω load while operating over industrial temperature range of -40 to 85°C. Housed in 0.2 x 0.2 x 0.06 in. USSP package,...

Read More »
Low-Noise L-Band VCO comes in 0.5 x 0.5 x 0.22 in. package.
Oscillators

Low-Noise L-Band VCO comes in 0.5 x 0.5 x 0.22 in. package.

Operating at 1,878–1,879 MHz withÂ- 1–4 Vdc tuning voltage range, ceramic resonator-based CRO1878A-LF features SSB spectral purity of -138 dBc/Hz @ 100 kHz offset and operates with average tuning sensitivity of 5 MHz/V. RoHS-compliant VCO delivers 4±2 dBm of output power into 50 Ω load while operating off 5 Vdc supply and drawing 25 mA typ. Operating from...

Read More »
Low-Noise VCO suits base station applications.
Oscillators

Low-Noise VCO suits base station applications.

Operating over 939–1,039 MHz range within 0.5–4.5 Vdc of tuning, CLV0989A-LF features spectrally clean signal of -109 dBc/Hz @ 10 kHz offset while covering bandwidth with tuning linearity of 1.1:1. RoHS-compliant, 0.5 x 0.5 x 0.22 in. VCO delivers nominal output power level of 0.5 dBm into 50 Ω load while operating off 5 Vdc supply and drawing 25 mA typ. Average tuning sensitivity is 29...

Read More »
Oscillators

Shock-Resistant Oscillator performs in high-temperatures.

Supplied in TO-39 package, SQXO-2ATHG can withstand shock levels up to 8,000 g for 0.5 msec, Â-½ sine, for use in such applications as underground boring tools, down hole instrumentation, and avionics. Frequencies are available from 32.768 kHz to 50 MHz, and products can be specified to operate from 3.3 or 5 V supply. Providing CMOS output and start up time of under 5 msec, fully...

Read More »
Voltage Controlled Oscillator features linear tuning.
Oscillators

Voltage Controlled Oscillator features linear tuning.

Operating at 4,100–4,300 MHz with tuning voltage of 0.5–4.5 Vdc, Model V844ME36-LF provides better than 1.1:1 tuning linearity, typical tuning sensitivity of 93 MHz/V, and spectrally clean signal of -110 dBc/Hz at 100 kHz offset. Unit delivers 3 dBm of output power into 50 Ω load while operating off 5 Vdc supply and drawing 15 mA of current. Housed in MINI-14S-L package measuring 0.5 x 0.5 x...

Read More »
Voltage Controlled Oscillator operates at 1,680 MHz.
Oscillators

Voltage Controlled Oscillator operates at 1,680 MHz.

Operating with control voltage range of 0.5~4.5 V, Model CVCO55CC-1680-1680 features typical phase noise of -117 dBc/Hz at 10 KHz offset and typical output power of +2.5 dBm. Input voltage is 5 V, with max current consumption of 20 mA. Pulling and pushing are minimized to 2 MHz and 1 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, oscillator is suited for digital radio equipment, fixed...

Read More »
Voltage Controlled Oscillator operates from 200-239 MHz.
Oscillators

Voltage Controlled Oscillator operates from 200-239 MHz.

Operating with control voltage range of 0.5~4.5 V and typical output power of +8.5 dBm, Model CVCO55FL-0200-0239 features typical phase noise of -123 dBc/Hz at 10 KHz offset. Input voltage is 5 V with max current consumption of 25 mA, and pulling and pushing are minimized to 0.5 MHz and 0.5 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, VCO is suited for digital radio equipment, fixed...

Read More »
Crystal Units offer optimized frequency tolerance.
Oscillators

Crystal Units offer optimized frequency tolerance.

With frequency tolerance of ±20 ppm at +25°C, and frequency shift by temperature of ±20 ppm max from -30 to +85°C, XRCGB-F-P Series is suitable for use in 802.1 wireless connectivity designs using protocols such as Bluetooth Low Energy and ZigBee. Units are constructed in 2016 package, making them ideal candidates for second sourcing.

Read More »
Voltage Controlled Oscillator operates at 2,756 MHz.
Oscillators

Voltage Controlled Oscillator operates at 2,756 MHz.

With output power of +4 dBm and control voltage range of 0.5~4.5 V, Model CVCO55CC-2756-2756 features typical phase noise of -116 dBc/Hz at 10 KHz offset. Input voltage is 5 V, with max current consumption of 28 mA. Pulling and Pushing are minimized to 1 MHz and 0.2 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, oscillator is suited for digital radio equipment, fixed wireless access,...

Read More »

All Topics