Oscillators

Miniature Clock Oscillator can drive 15 pF load.
Oscillators

Miniature Clock Oscillator can drive 15 pF load.

Measuring 2.0 x 1.6 x 0.65 mm, Model CO2016 is available in 3 power supply voltages of 1.8 V ±5%, 2.5 V ±5%, and 3.3 V ±5%. Unit operates from -10 to +70°C and offers frequency stability of 25, 30, 50, and 100 ppm. Featuring built-in enable/disable function, oscillator is suited for microprocessor and DSP clocks, alarms, embedded computing devices, personal digital...

Read More »
Clocks

Ruggedized Rubidium Clock performs in high EMI environments.

Supplied in EMI-shielded package, SRO-5680 utilizes SmarTiming+® technology to intelligently synchronize, discipline, and control any Stratum-1 reference, such as GPS/GNSS, Cesium, Hydrogen Maser, and T1/E1, at 1 ns resolution. This GPS/GNSS synchronized Rubidium oscillator isolates precision timing and frequency signals onÂ- 3 SMA connectors: 1 PPS reference input, 1 PPS output, and...

Read More »
Oscillators

OCXO is optimized for low phase noise performance.

Supplied 36 x 27 mm Eurostyle package, IQOV-200F runs off 12 V supply and delivers optimized phase noise performance with close-in measurement of -130 dBc @ 100 Hz and noise floor better than -180 dBc across 80–130 MHz range. Frequency stability isÂ- Ã‚±50 ppb over -20 to +70°C operating range, and sinewave output is 13 dBm min. Consuming 150 mA max at 25°C and 350...

Read More »
Clocks

Hybrid Crystal Timing Device targets automotive applications.

Measuring 2.5 x 2.0 mm, XRC Series is available with nominal frequencies of 12–24 MHz, providingÂ- highly accurate clock for automotive electronic control units. Typically used for in-vehicle networks such as CAN and FlexRay, series incorporates crystal element within ceramic resonator package structure. Frequency tolerance is typically ±100 ppm at 25°C, and operating...

Read More »
Oscillators

Miniature VCTCXO IC exhibits frequency stability.

Delivered as die or in QFN-10, 3 x 3 package, MAS6279 is primarily intended for stable TCXO and VCTCXO modules. Use ofÂ- fully analog compensation method makes it possible to achieve ±0.14 ppm or better frequency stability. Power consumption is 1.3 mA typ, minimum operating temperature is -40°C, and phase noise is -136 dBc/Hz at 1 kHz. Programmable divider...

Read More »
Voltage Controlled Oscillator tunes from 3-6 GHz.
Oscillators

Voltage Controlled Oscillator tunes from 3-6 GHz.

Suited for satellite communication applications, Model V600ME45-LF operates from 3,000–6,000 MHz with tuning voltage range of 0–24 Vdc. Octave tuning VCO features typical phase noise of -103 dBc/Hz at 100 kHz offset and average tuning sensitivity of 147 MHz/V. Housed in MINI-16-LOW package measuring 0.5 x 0.5 x 0.16 in., RoHS-compliant device delivers typical output power of 6 dBm into 50 Ω...

Read More »
Pushbutton Switches

Agilent Technologies to Demonstrate Leading-Edge Test Solutions for Memory, NVM Express, PCI Express, and SuperSpeed USB Applications at Intel Developer Forum

SANTA CLARA, Calif. – Agilent Technologies Inc. (NYSE: A) today announced that it will demonstrate its latest test solutions that meet the challenges of current and next-generation digital designs in memory, NVM Express, PCI Express, and SuperSpeed USB technology at the Intel Developer Forum, Sept. 10-12, at the Moscone Convention Center in San Francisco. Memory Debug and Validation Agilent...

Read More »
Oscillators

SAW Clock Oscillator features ultra-low jitter/phase noise.

Utilizing surface acoustic wave resonator technology, 245.760 MHz Model CCSO-914X-245.760 provides -150 dBc/Hz phase noise at 10 KHz offset and noise floor of -169 dBc/Hz. Unit operates from 3.3 or 5 V and generates true sinewave with +8 dBm min output power. Device has no sub-harmonics and second harmonic is -20 dBc typical. Housed in 9 x 14 mm SMT package with temperature range of -40 to...

Read More »
Oscillators

Oscillators offer CMOS, LVDS, and LVPECL output options.

Comprising factory-configurable oscillators and voltage-controlled oscillators, CJ Series features frequency range of 10 MHz to 1.5 GHz and operating voltage of 2.5 or 3.3 V. Units are available in commercial and industrial temperature ranges of 0–70°C and -40 to +85°C. Supplied in plastic or ceramic surface mount package measuring 5 x 3.2 mm or 5 x 7 mm, oscillators offer 25 and 50...

Read More »
Surface Mount OCXO holds tight stabilities down to 5 ppb.
Oscillators

Surface Mount OCXO holds tight stabilities down to 5 ppb.

Suited as timing reference for network synchronization, FTM Series provides standard stability of ±10 ppb across standard frequencies from 5–40 MHz with temperatures from -40 to +85°C. Frequency control pin allowsÂ- minimum of ±0.7 ppm frequency adjustment, output load is 15 pF typ, and long term aging over 10 years is 0.4 ppm for all effects. Weighing 5.7 g, OCXO has...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers