Oscillators

Oscillators

SMD Crystals and Oscillators measure 2.5 x 2.0 mm.

Supporting -10 to +70°C or -40 to +85°C ranges, ultra light crystals offer precision with frequencies from 15.000–48.000 MHz in fundamental mode. Ultra low phase noise oscillators, designed to minimizeÂ- power consumption with availability of Tri-State Function, operate from -40 to +85°C and support frequencies from 0.750–110.000 MHz in fundamental or Third OT...

Read More »
Master Crystal Oscillator targets advanced space applications.
Oscillators

Master Crystal Oscillator targets advanced space applications.

Housed in 50 x 50 x 30 mm package weighing 100 g, LNMO low phase noise master crystal oscillator features phase noise of -110 dBc/Hz at 1 Hz from 10 MHz carrier. UnitÂ- has hardened radiation rates less than 100 kRad and offers high frequency stability of ±1E-9 over -30 to +70°C temperature range. With power consumption of 1.5 W, oscillator is suited for GNSS receivers, up/down...

Read More »
Signal Receivers

GPS/GNSS Receiver and OCXO offers precision timing.

Featuring 76 x 20 x 38Â- mm footprint, GXClok™-500 integrates 50-channel GPS/GNSS receiver with crystal oscillator module. Device features low phase noise of -95 dBc/Hz at 1 Hz from 10 MHz carrier and high frequency stability of ±3E-10 over temperature range of -40 to +85°C. Consuming 3 W nominal, GXClok-500 provides precision timing for satcom, telecom, navigation,...

Read More »
Low Input Current Optocouplers provide phototransistor output.
Electrical Isolators

Low Input Current Optocouplers provide phototransistor output.

Housed in SSOP-4 mini-flat package, Series VOS618A and VOS617A feature DC input currentsÂ- of 1 mA and 5 mA, respectively. Units have GaAs infrared emitting diode, which is optically coupled to silicon planar phototransistor detector. SSOP-4 package provides 3,750 Vrms isolation voltage rating, half lead pitch of 1.27 mm, and creepage/clearance distance of ≥5 mm. Offering CRT...

Read More »
Coaxial Resonator Oscillator provides frequency doubling.
Oscillators

Coaxial Resonator Oscillator provides frequency doubling.

Consisting of coaxial-based VCO with internal frequency doubler, Model CVCO55CXT-5270-5375 operates from 5,270–5,375 MHz with tuning voltage of 0.3–4.7 Vdc. Oscillator features typical phase noise of -102 dBc/Hz at 10 KHz offset. Unit exhibits output power of 0.0 dBm into 50 Ω load with supply of +5.0 Vdc and current consumption of 30 mA max. Housed in 0.5 x 0.5 in. package, CRO is suited...

Read More »
Low Phase Noise TCXO features 4.0-54.0 MHz frequency range.
Oscillators

Low Phase Noise TCXO features 4.0-54.0 MHz frequency range.

Housed in miniature 3.2 x 2.5 x 1.0 mm ceramic package, Model IQXT-60 features typical phase noise figures of -63 dBc/Hz at 10 Hz and -161 dBc/Hz at 100 kHz, coupled with low current consumption of 5.0 mA. Unit provides frequency stability of ±2.5 ppm over operating temperature range of -30 to +75°C and frequency tolerance of ±0.5 ppm. With HCMOS output capable of driving 15 pF...

Read More »
Oven Controlled Crystal Oscillator comes in 14-pin DIL package.
Oscillators

Oven Controlled Crystal Oscillator comes in 14-pin DIL package.

Available in frequency range of 5–100 MHz, IQOV-160 Series delivers stability of ±5 ppb over operating temperature of -40 to +85°C. Units provide Sine Wave or HCMOS output with supply voltage of 3.3 V. Typical phase noise performance for 10 MHz version is -85 dBc/Hz at 10 Hz, -130 dBc/Hz at 100 Hz, -150 dBc/Hz at 1 KHz, -155 dBc/Hz at 10 KHz, and -160 dBc/Hz at 100 KHz. Consuming...

Read More »
Coaxial Resonator Oscillator operates from 5,580-5,685 MHz.
Oscillators

Coaxial Resonator Oscillator operates from 5,580-5,685 MHz.

Along with tuning voltage range of 0.3–4.7 Vdc, CVCO55CXT-5580-5685 coaxial-based VCO features internal proprietary frequency doubler, 0.5 x 0.5 in. package size, and typical phase noise of -102 dBc/Hz @ 10 KHz offset. Product exhibits output power of 0.0 dBm typ into 50Â- Ω load with supply of +5.0 Vdc and current consumption of 30 mA max. Pushing and pulling are...

Read More »
Coaxial Resonator Oscillator has internal frequency doubler.
Oscillators

Coaxial Resonator Oscillator has internal frequency doubler.

Operating from 5,370–5,470 MHz with tuning voltage range of 0.3–4.7 Vdc, CVCO55CXT-5370-5470 is coaxial-based VCO with internal frequency doubler. Typical phase noiseÂ- is -102 dBc/Hz @ 10 KHz offset, and pushing and pulling are respectively minimized to 1.5 MHz/V and 0.5 MHz. Supplied in 0.5 x 0.5 in. package, CRO exhibits output power of 0.0 dBm typ into 50 ohm load with supply...

Read More »
S-Band VCO typically draws 15 mA of current.
Oscillators

S-Band VCO typically draws 15 mA of current.

Operating from 2,850–3,050 MHz with 0–2.5 Vdc tuning voltage range,Â- model SMV2950A-LF features phase noise of -85 dBc/Hz @ 10 kHz offset while working on 3.0 Vdc supply. RoHS-compliant VCO provides end user typical output power of 3±3 dBm into 50 Ω load and operates over -40 to 85°C range. VCO comes in 0.3 x 0.3 x 0.08 in. SUB-L package, suppresses second...

Read More »

All Topics