New Mechanical Power Transmission Products

Supercharger is adaptable to all automotive engine designs.

Twin Vortices Series (TVS(TM)) Roots-type supercharger allows automakers to use smaller compressors to create optimal engine boost. In addition to scalable design, unit features 4-lobe rotors as well as high-flow inlet and outlet ports that promote thermal efficiency, which translates to increased volumetric capacity at higher RPMs.

New NSK Bearings Help Make High-Speed Elevator Rides Quieter and Smoother

ANN ARBOR, MICHIGAN, (October, 2006) - NSK Corporation, a leader in the motion and control industry, is pleased to introduce a new line of spherical roller (SR) bearings designed specifically for use in elevator hoists. With elevator cars operating at faster speeds and capable of larger passenger capacities, conventional spherical roller bearings were unable to adequately handle the increased...

Engines power commercial equipment.

Suited for use with 5.5-6.5 hp commercial equipment, CP550 and CP650 single-cylinder engines have compact Overhead Valve design, dual ball bearing crankshaft, and Dura-Bore cast iron cylinder sleeve. One-start carburetor enables one-pull starts and promotes smooth operation. Along with fuel shut-off valve and Lo-Tone muffler, engines incorporate high-mount oil-fill, low-oil sensor, and...

Commercial Power Engines come in vertical shaft models.

Vanguard(TM) V-Twin BIG BLOCK(TM) air-cooled engines are offered in vertical shaft models, 895 and 993 cc, for powering commercial applications. Along with centrifugal, multi-stage industrial air cleaner, engines incorporate debris management system that allows for cool and clean operation. Both models, based on V-Twin/Overhead Valve technology, feature aluminum block and steel-backed aluminum...

Saving Energy with Efficient Belt Drives

By introducing energy efficient belts on electric motor drives, you can implement a simple, cost-effective solution to achieve energy savings in your facility.

Linear Motors double pick-and-place efficiency.

Equipped with 2 independent load-positioning Forcers, each controlled by its own Xenus Micro controller, direct drive ServoTube linear motors enable pick-and-place to positioning 2 items in time usually required for one. Multiple forcers run on single rail bearing and pick twin objects with one center-to-center distance and then place them elsewhere at different center-to-center distance. Forcers...

aStep Product Family Goes RoHS Compliant

Torrance, CA - ORIENTAL MOTOR USA CORP. now offers the entire aSTEP product family as RoHS compliant. The RoHS directive restricts the use of 6 hazardous substances in electric and electronic equipment. The aSTEP is an innovative stepping motor and driver unit that uses closed-loop control to eliminate missteps and loss of synchronism. The aSTEP uses a newly developed sensor to detect the step...

LED Drivers suit general lighting applications.

Suited for low-power applications, Xitanium(TM) 350 and 700 mA Drivers support 1-3 Luxeon I models, 1-2 Luxeon III models, or 1 Luxeon V model as well as market-equivalent LEDs. Units carry CSA listing and feature UL Class 2 rating with inherent short-circuit protection. Tightly regulated output of 1% line and 5% load insures consistent light output regardless of line conditions, load levels, and...

Adapter Kit includes most frequently used N adapters.

Supplied in pistol-grip case, N Adapters are constructed from precision machined brass with tarnish-resistant nickel plating, and can be used directly without intermediate couplers. Male center pins are gold-plated brass and female center contacts are gold-plated, heat-treated beryllium copper. All insulation material is high-density PTFE.

High-Torque Timing Pulleys

Misumi (www.misumiusa.com) has added sizes to its line of metric/inch aluminum, carbon and stainless steel high-torque timing pulleys for 2006. 14-72 teeth, easy positioning, no backlash, longer teeth designed to improve transmission and reduce noise. Misumi timing pulleys are available for use with 14 different belt styles and and can be manufactured with a variety of center holes such as round,...

GE Gas Turbine Technology Selected for Pearl GTL Project in Qatar

FLORENCE, ITALY - September 25, 2006 - GE's Oil & Gas business will supply six PG6581B (Frame 6B) gas turbines, equipped with dual fuel IGCC (integrated gasification combined-cycle) type combustion systems, to Qatar Shell GTL Ltd. for the Pearl GTL (gas-to-liquids) project in Ras Laffan Industrial City, Qatar. In addition to the 42-megawatt gas turbine-generators, the scope of GE's contract...

ISO-Certified Precision Machining and Contract Manufacturing Services from DFF

DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.